Nick
$ man pppd
relates for error 2
2 An error was detected in processing the options given,
such as two mutually exclusive options being used.
Please run:
$(egrep -v '#|^ *$' /etc/ppp/options)
and send me the output the List the output.
on my System the output is below
MarvS
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
On Mon, Dec 28, 2009 at 9:11 PM, Nick <nwahl@xxxxxxxxxxxxxx> wrote:
> Thanks, Marv. I thought the 'under Linux' was the answer, but it
> wasn't (see dialout attempt below). - Nick
>
> nw@nw:~$ sudo wvdial
> --> WvDial: Internet dialer version 1.60
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> OK
> --> Modem initialized.
> --> Sending: ATDT0198331333
> --> Waiting for carrier.
> ATDT0198331333
> CONNECT 57600
> User Access Verification
> Username: username: login:
> --> Carrier detected. Waiting for prompt.
> Username: username: login:
> --> Looks like a login prompt.
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> --> Sending: pacific.net.au/nwahl
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> pacific.net.au/nwahl
> Password: password:
> --> Looks like a password prompt.
> --> Sending: (password)
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> % Authorization failed.
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> --> Connected, but carrier signal lost! Retrying...
> ^CCaught signal 2: Attempting to exit gracefully...
> --> Disconnecting at Tue Dec 29 11:35:55 2009
> nw@nw:~$
>
> Marvin Stodolsky wrote:
>> Nick,
>>
>> If your IP uses CHAP authentification your may need instead of
>> LoginName under Linux
>> pacific.net.au/LoginName
>>
>> MarvS
> [snip]
>
>
