Vijay, We understand that the the agrsm driver installation was OK under 2.6.31-16-generic. These were drivers compiled with Nikolay's agrsm06pci-2.1.80~20090825-modified packaged. You system has the Agere modem with SV92EX 11c1:0630 chipset There was a failure to detect the modem at the wvdialconf test. There may a problem with this particular kernel. See this mornings message from Nikolay. Presently I'll assemble a package with the kernel that may be more functional. MarvS On Sat, Dec 19, 2009 at 3:45 AM, Vijay C <c_vijay@xxxxxxx> wrote: > Dear Martin, > thank u very much for thr quick response. I have run the package and the > modem is still not detecting. > I have attached the error report. > Pls. advise. > > Rgds, > CV > > ------------------------------------------------- > > >> Date: Fri, 18 Dec 2009 22:19:09 -0500 >> Subject: Re: Agere HDA PCI express Ubuntu modem driver >> From: marvin.stodolsky@xxxxxxxxx >> To: c_vijay@xxxxxxx >> >> Vijay, >> >> Copy both attachments to your home folder. Then start an install with: >> $ sudo dpkg -i agrsm*.deb >> >> If >> agrsm-test >> doesn't run automatically, run after the installs >> $ sudo agrsm-test >> >> I don't have a success report yet with these drivers. >> Below is the install on my System, which doesn't have the modem hardware. >> >> MarvS >> >> $ sudo dpkg -i *.deb >> Selecting previously deselected package agrsmpci06. >> (Reading database ... >> dpkg: warning: files list file for package `agrsmpci06' missing, >> assuming package has no files currently installed. >> (Reading database ... 264882 files and directories currently installed.) >> Preparing to replace agrsmpci06 2.1.80~2.6.31-16-generic_1.1 (using >> agrsmpci06_2.1.80~2.6.31-16-generic_1.1_i386.deb) ... >> >> The dkms driver autocompiling package is installed. >> The drivers source code is being installed to the folder /usr/src/ >> Then the drivers will be compiled and installed by the dkms tool >> provided that your System has adequate compiling support. >> Following kernel upgrades, complementary drivers will be >> automatically compiled and installed. >> >> Unpacking replacement agrsmpci06 ... >> Setting up agrsmpci06 (2.1.80~2.6.31-16-generic_1.1) ... >> >> Will take a while to calculate module dependencies with: depmod -ae >> WARNING: -e needs -E or -FFor a first functional test, run: >> sudo agrsm-test >> >> $ sudo agrsm-test >> >> Found drivers for boot kernel 2.6.31-16-generic at: >> /lib/modules/2.6.31-16-generic/extra/agrserial.ko >> /lib/modules/2.6.31-16-generic/extra/agrmodem.ko >> >> >> >> Loading drivers: >> >> Drivers loaded: >> agrserial 11872 0 >> agrmodem 1333636 1 >> snd 59204 19 >> >> agrmodem,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device >> >> and symbolic link created: >> lrwxrwxrwx 1 root root 12 2009-12-18 21:56 /dev/ttySAGR -> /dev/ttyAGS3 >> >> Checking for utility wvdialconf >> Found /usr/bin/wvdialconf, preparing to run: >> wvdialconf /etc/wvdial.conf >> >> Modem Port Scan<*1>: S0 S1 S2 S3 >> ttySAGR<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >> ttySAGR<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >> ttySAGR<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. >> >> A reboot may be necessary before modem detection through: >> sudo modprobe agrserial >> Which will load agrmodem, agrserial and create the symbolic link needed >> for: >> sudo wvdialconf >> >> >> The installation record has been written to ./agrsm-test.txt >> >> Report back to discuss@xxxxxxxxxxxxx , not me directly >> >> On Fri, Dec 18, 2009 at 10:32 AM, Vijay C <c_vijay@xxxxxxx> wrote: >> > Dear Martin, >> > I am using Ubuntu 9.10 and the kernel version is 2.6.31-16-generic. The >> > modem is LSI PCI express based on SV92EX modem controller. I have tried >> > upto >> > Agere driver version 2.1.80 and still the modem doesn't work. I have >> > also >> > tried kernel version 2.6.31-14-generic. The error message that I get >> > after >> > installation is given below: >> > -> WvDial: Internet dialer version 1.60 >> > --> Initializing modem. >> > --> Sending: ATZ >> > --> Sending: ATQ0 >> > --> Re-Sending: ATZ >> > --> Modem not responding. >> > >> > If I restart the system then again I need to run "make module" and "make >> > install" every time. >> > is there a driver for the same. >> > Pls. help. >> > I am a new bee to Linux. >> > >> > Rgds, >> > CV >> > >> > ________________________________ >> > New Windows 7: Find the right PC for you. Learn more. > > ________________________________ > New Windows 7: Find the right PC for you. Learn more.
