Jacques,
The Technions Linmodems server http://linmodems.technion.ac.il is down.
Please report to the List when it is up again.
MarvS
On Tue, Dec 8, 2009 at 2:18 AM, Jacques Goldberg
<Jacques.Goldberg@xxxxxxx> wrote:
> Done.
>
>
> Please note: leaving to Paris within a few hours, followed by Geneva
> Wednesday morning, back to Paris Thursday evening.
>
> Completely off line Saturday as usual and Sunday-Monday -> Amsterdam.
>
> I then stay in Paris until Dec 29 with good connectivity.
>
>
> Best regards
>
> Jacques
>
>
> Marvin Stodolsky wrote:
>
>> Jacques,
>> Please put the agrsm-2.6.30.tar.bz2 in the ltmodem/11c11040 folder.
>>
>> MarvS
>>
>>
>> ---------- Forwarded message ----------
>> From: Bjorn Wielens <Uniacke1@xxxxxxxx>
>> Date: Mon, Dec 7, 2009 at 1:25 PM
>> Subject: Re: Agere systems HDA modem
>> To: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
>> Cc: Nikolay Zhuravlev <xxor@xxxxxxx>, Zsolt BÉRCZES <zsolt@xxxxxx>
>>
>>
>> As attached.
>> Please note- trying to load the modules on my OpenSuSE 11.2 system gives
>> an error about the module_version symbol. using modprobe --force is
>> necessary to load the drivers and does not appear to cause ill effects.
>>
>> The modules compile without ANY warnings or errors on my computer... if
>> any appear on yours, beware of using the --force option.
>>
>> Bjorn.
>>
>>
>> Marvin Stodolsky wrote:
>>
>>>
>>> Bjorn,
>>>
>>> Please resend the tarball, it wasn't attached in any of the messages I
>>> received.
>>>
>>> Marvin
>>>
>>> On Mon, Dec 7, 2009 at 6:19 AM, Bjorn Wielens <Uniacke1@xxxxxxxx> wrote:
>>>
>>>>
>>>> You could just use the agrsm-2.6.30 I sent out yesterday to build the
>>>> dkms tarballs. It is fully patched and ready to use (the exact source I
>>>> use on my 2.6.31 system)
>>>>
>>>> The printk issue has been removed, and I've already forwarded the
>>>> tarball to Jacques.
>>>>
>>>>
>>>> Bjorn.
>>>>
>>>> Marvin Stodolsky wrote:
>>>>
>>>>>
>>>>> Nikolay,
>>>>>
>>>>> Thanks for the great rescue!!
>>>>> Would you and Bjorn please coordinate on a final recommended tarball,
>>>>> with a 11mdv designation
>>>>>
>>>>> There should be some text on the printk() issues,
>>>>> which will be obscure to most Users including me.
>>>>>
>>>>> Then send the tarball to both Jacques, Zsolt and me as
>>>>> I can do the dkms compatibility update and the Debian installer
>>>>> package.
>>>>>
>>>>> For any suspect calls, It might be worth while looking at code
>>>>> features in the agrsm06pci-2.1.80~20090825.tar.gz
>>>>> This was a code update by the LSI/Agere maintainer to 2.6.28 kernels,
>>>>> though only for none HDA dependent 11c1:0620/30 chipsets.
>>>>>
>>>>> MarvS
>>>>>
>>>>> On Sun, Dec 6, 2009 at 3:01 PM, Nikolay Zhuravlev <xxor@xxxxxxx> wrote:
>>>>>
>>>>>>
>>>>>> The tarball is bzip2 compressed, not gzipped.
>>>>>> Also, Makefile.mine is not needed.
>>>>>>
>>>>>> --
>>>>>> Nick Zhuravlev
>>>>>> www.auriga.com
>>>>>>
>>>>>>
>>>>>> On Sun, Dec 06, 2009 at 03:25:50PM -0400, Bjorn Wielens
>>>>>> <Uniacke1@xxxxxxxx> wrote:
>>>>>>
>>>>>>
>>>>>>>
>>>>>>> This is the source (NON-DKMS) for the agrsm 11c11040 (and others
>>>>>>> supported by agrsm) on 2.6.30 or above.
>>>>>>> All patches have already been applied, including Nikolays'. Also some
>>>>>>> changes to pid handling since it used functions that were deprecated.
>>>>>>>
>>>>>>> To use you must MANUALLY change the module license from proprietary.
>>>>>>>
>>>>>>> Modem dialling sounds do NOT work in this package, hence agrMdmDaemon
>>>>>>> is
>>>>>>> NOT included.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Bjorn Wielens wrote:
>>>>>>>
>>>>>>>>
>>>>>>>> I've stripped all the unnecessary ones from my source.
>>>>>>>> I was able to dial in and maintain a PPP session on 2.6.31 (openSuSE
>>>>>>>> 11.2 stock kernel) and now I am testing to see whether the dialling
>>>>>>>> sounds can be made to work (they worked in 2.6.27 for me, not
>>>>>>>> anymore).
>>>>>>>> I will send a tarball of sources to Jacques as soon as I get a
>>>>>>>> definitive result.
>>>>>>>>
>>>>>>>> Bjorn.
>>>>>>>>
>>>>>>>> Nikolay Zhuravlev wrote:
>>>>>>>>
>>>>>>>>>
>>>>>>>>> All,
>>>>>>>>>
>>>>>>>>> I got the same results for the 2.6.28.10 kernel.
>>>>>>>>> (without the patches a_18_19.patch and a_19_20.patch)
>>>>>>>>>
>>>>>>>>> Also, I noticed that the driver does quite a lot of output
>>>>>>>>> to /var/log/messages, as compared to the "7mdv" tarball:
>>>>>>>>>
>>>>>>>>> $ grep printk agrsm-2.1.80-10mdv2009.0-modified/*.c | wc -l
>>>>>>>>> 82
>>>>>>>>> $ grep printk agrsm-2.1.80-7mdv2009.0/*.c | wc -l
>>>>>>>>> 46
>>>>>>>>>
>>>>>>>>> It is better to #ifdef the printk()s and use them only for
>>>>>>>>> the debugging sessions.
>>>>>>>>>
>>>>>>>>> If something goes wrong, the /var/log/messages grows to
>>>>>>>>> hundreds of megabytes within minutes.
>>>>>>>>>
>>>>>>>>>
>>>>>>
>>>>>>
>>
>> >
>
>
