__________ Información de ESET Smart Security, versión de la base de firmas de virus 4676 (20091210) __________
ESET Smart Security ha comprobado este mensaje.
part000.txt - esta correcto
ModemData.txt - esta correcto
dmesg.txt - esta correcto
http://www.eset.com
--
Este mensaje ha sido analizado por MailScanner Nodo Finlay, Camaguey, Cuba
en busca de virus y otros contenidos peligrosos,
y se considera que está limpio.
Visite nuestro sitio http://nodofinlay.cmw.sld.cu
--
Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas
Infomed: http://www.sld.cu/
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.31-14-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009
scanModem update of: 2009_02_28
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
Attached USB devices are:
ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 00:08.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:08.0 1057:3052 1057:3020 Modem: Motorola SM56 Data Fax Modem
Modem interrupt assignment and sharing:
19: 0 IO-APIC-fasteoi eth0
--- Bootup diagnostics for card in PCI slot 00:08.0 ----
[ 0.103798] pci 0000:00:08.0: reg 10 32bit mmio: [0xdfff3000-0xdfff3fff]
[ 0.103807] pci 0000:00:08.0: reg 14 io port: [0xe000-0xe0ff]
[ 0.103859] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 0.103865] pci 0000:00:08.0: PME# disabled
[ 0.904839] serial 0000:00:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.904983] 0000:00:08.0: ttyS2 at I/O 0xe008 (irq = 19) is a 16450
[ 0.905063] 0000:00:08.0: ttyS3 at I/O 0xe010 (irq = 19) is a 8250
[ 0.905090] Couldn't register serial port 0000:00:08.0: -28
The PCI slot 00:08.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:08.0:
Modem chipset detected on
NAME="Modem: Motorola SM56 Data Fax Modem "
CLASS=0703
PCIDEV=1057:3052
SUBSYS=1057:3020
IRQ=19
IDENT=slamr
For candidate modem in: 00:08.0
0703 Modem: Motorola SM56 Data Fax Modem
Primary device ID: 1057:3052
Support type needed or chipset: slamr
----------------end Softmodem section --------------
1057:3052 has a Motorola chipset, poorly supported by Motorola itself
However Zello discovered that drivers written to support Smartlink modems do support the 1057:3052 chipset!!
It sufficed to add 1057:3052 to the list of modem cards recognized by the Smartlink slamr driver.
There is a ungrab-winmodem driver used in conjunction with slamr, which must have 1057:3052
similarly added. See messages from Zello:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html
and Alvaro Aguirre about the ungrab-winmodem fix:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html
For general guidance on ungrab-winmodem + slamr usage, read the DOCs/Smartlink.txt
The modem is supported by the Smartlink
plus the slmodemd helper utility. Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
For 2.6.31-14-generic compiling drivers is necessary. As of October 2007 the current packages at
http://linmodems.technion.ac.il/packages/smartlink/ are the
ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.1
and the compiler used in kernel assembly: 4.4.1
The patch utility is needed and is needed for compiling ALSA drivers, and possibly others.
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.31-14-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
CPU0
0: 47 IO-APIC-edge timer
1: 283 IO-APIC-edge i8042
3: 14 IO-APIC-edge
4: 16 IO-APIC-edge
6: 5 IO-APIC-edge floppy
7: 0 IO-APIC-edge parport0
8: 0 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
14: 25286 IO-APIC-edge pata_sis
15: 0 IO-APIC-edge pata_sis
17: 46314 IO-APIC-fasteoi sata_sis
18: 3773 IO-APIC-fasteoi saa7130[0], SiS SI7012
19: 0 IO-APIC-fasteoi eth0
20: 52191 IO-APIC-fasteoi ohci_hcd:usb2
21: 0 IO-APIC-fasteoi ohci_hcd:usb3
22: 0 IO-APIC-fasteoi ohci_hcd:usb4
23: 2 IO-APIC-fasteoi ehci_hcd:usb1
NMI: 0 Non-maskable interrupts
LOC: 342266 Local timer interrupts
SPU: 0 Spurious interrupts
CNT: 0 Performance counter interrupts
PND: 0 Performance pending work
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 8 Machine check polls
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002dfb0000 (usable)
[ 0.000000] BIOS-e820: 000000002dfb0000 - 000000002dfc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000002dfc0000 - 000000002dff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002dff0000 - 000000002e000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x2dfb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 020000000 mask FF8000000 write-back
[ 0.000000] 2 base 028000000 mask FFC000000 write-back
[ 0.000000] 3 base 02C000000 mask FFE000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000002dfb0000 (usable)
[ 0.000000] modified: 000000002dfb0000 - 000000002dfc0000 (ACPI data)
[ 0.000000] modified: 000000002dfc0000 - 000000002dff0000 (ACPI NVS)
[ 0.000000] modified: 000000002dff0000 - 000000002e000000 (reserved)
[ 0.000000] modified: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000002dfb0000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 002dc00000 page 2M
[ 0.000000] 002dc00000 - 002dfb0000 page 4k
[ 0.000000] kernel direct mapping tables up to 2dfb0000 @ 10000-15000
[ 0.000000] RAMDISK: 220b8000 - 22803ad6
[ 0.000000] ACPI: RSDP 000fad80 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 2dfb0000 00030 (v01 A M I OEMRSDT 01000625 MSFT 00000097)
[ 0.000000] ACPI: FACP 2dfb0200 00081 (v02 A M I OEMFACP 01000625 MSFT 00000097)
[ 0.000000] ACPI: DSDT 2dfb03f0 03875 (v01 100XX 100XX001 00000001 INTL 02002026)
[ 0.000000] ACPI: FACS 2dfc0000 00040
[ 0.000000] ACPI: APIC 2dfb0390 0005C (v01 A M I OEMAPIC 01000625 MSFT 00000097)
[ 0.000000] ACPI: OEMB 2dfc0040 00040 (v01 A M I AMI_OEM 01000625 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 735MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2dfb0000
[ 0.000000] low ram: 0 - 2dfb0000
[ 0.000000] node 0 low ram: 00000000 - 2dfb0000
[ 0.000000] node 0 bootmap 00011000 - 00016bf8
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 002dfb0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [00220b8000 - 0022803ad6] RAMDISK ==> [00220b8000 - 0022803ad6]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008a9000 - 00008ac21c] BRK ==> [00008a9000 - 00008ac21c]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000017000] BOOTMAP ==> [0000011000 - 0000017000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002dfb0
[ 0.000000] HighMem 0x0002dfb0 -> 0x0002dfb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0002dfb0
[ 0.000000] On node 0 totalpages: 188223
[ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1440 pages used for memmap
[ 0.000000] Normal zone: 182800 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 2e000000 (gap: 2e000000:d1780000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c15c4000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186751
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=bb6691f8-a61e-4710-9cb2-f37b5134de07 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 3766400 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 726768k/753344k available (4565k kernel code, 25840k reserved, 2143k data, 540k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xee7b0000 - 0xff7fe000 ( 272 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xedfb0000 ( 735 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2918.746 MHz processor.
[ 0.001149] Console: colour VGA+ 80x25
[ 0.001154] console [tty0] enabled
[ 0.001210] Calibrating delay loop (skipped), value calculated using timer frequency.. 5837.49 BogoMIPS (lpj=11674984)
[ 0.001242] Security Framework initialized
[ 0.001271] AppArmor: AppArmor initialized
[ 0.001281] Mount-cache hash table entries: 512
[ 0.001499] Initializing cgroup subsys ns
[ 0.001510] Initializing cgroup subsys cpuacct
[ 0.001515] Initializing cgroup subsys memory
[ 0.001525] Initializing cgroup subsys freezer
[ 0.001528] Initializing cgroup subsys net_cls
[ 0.001557] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.001562] CPU: L2 cache: 256K
[ 0.001565] CPU: Hyper-Threading is disabled
[ 0.001571] mce: CPU supports 4 MCE banks
[ 0.001588] CPU0: Thermal monitoring enabled (TM2)
[ 0.001595] using mwait in idle threads.
[ 0.001609] Performance Counters: no PMU driver, software counters only.
[ 0.001619] Checking 'hlt' instruction... OK.
[ 0.017196] SMP alternatives: switching to UP code
[ 0.028023] ACPI: Core revision 20090521
[ 0.038971] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078960] CPU0: Intel(R) Celeron(R) CPU 2.93GHz stepping 09
[ 0.080001] Brought up 1 CPUs
[ 0.080001] Total of 1 processors activated (5837.49 BogoMIPS).
[ 0.080001] CPU0 attaching NULL sched-domain.
[ 0.080001] Booting paravirtualized kernel on bare hardware
[ 0.080001] regulator: core version 0.5
[ 0.080001] Time: 11:58:40 Date: 12/12/09
[ 0.080001] NET: Registered protocol family 16
[ 0.080001] EISA bus registered
[ 0.080001] ACPI: bus type pci registered
[ 0.080001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 0.080001] PCI: Using configuration type 1 for base access
[ 0.080448] bio: create slab <bio-0> at 0
[ 0.081217] ACPI: EC: Look up EC in DSDT
[ 0.092019] ACPI: Interpreter enabled
[ 0.092033] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.092070] ACPI: Using IOAPIC for interrupt routing
[ 0.102548] ACPI Warning: Incorrect checksum in table [OEMB] - FE, should be EF 20090521 tbutils-246
[ 0.102670] ACPI: No dock devices found.
[ 0.102871] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.102951] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
[ 0.103158] pci 0000:00:02.5: reg 10 io port: [0x00-0x07]
[ 0.103166] pci 0000:00:02.5: reg 14 io port: [0x00-0x03]
[ 0.103174] pci 0000:00:02.5: reg 18 io port: [0x00-0x07]
[ 0.103182] pci 0000:00:02.5: reg 1c io port: [0x00-0x03]
[ 0.103191] pci 0000:00:02.5: reg 20 io port: [0xffa0-0xffaf]
[ 0.103226] pci 0000:00:02.5: PME# supported from D3cold
[ 0.103232] pci 0000:00:02.5: PME# disabled
[ 0.103277] pci 0000:00:02.7: reg 10 io port: [0xe800-0xe8ff]
[ 0.103286] pci 0000:00:02.7: reg 14 io port: [0xec00-0xec7f]
[ 0.103335] pci 0000:00:02.7: supports D1 D2
[ 0.103338] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.103343] pci 0000:00:02.7: PME# disabled
[ 0.103372] pci 0000:00:03.0: reg 10 32bit mmio: [0xdfff4000-0xdfff4fff]
[ 0.103435] pci 0000:00:03.1: reg 10 32bit mmio: [0xdfff5000-0xdfff5fff]
[ 0.103497] pci 0000:00:03.2: reg 10 32bit mmio: [0xdfff6000-0xdfff6fff]
[ 0.103571] pci 0000:00:03.3: reg 10 32bit mmio: [0xdfff7000-0xdfff7fff]
[ 0.103625] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.103630] pci 0000:00:03.3: PME# disabled
[ 0.103678] pci 0000:00:05.0: reg 10 io port: [0xeff0-0xeff7]
[ 0.103686] pci 0000:00:05.0: reg 14 io port: [0xefe4-0xefe7]
[ 0.103694] pci 0000:00:05.0: reg 18 io port: [0xefa8-0xefaf]
[ 0.103702] pci 0000:00:05.0: reg 1c io port: [0xefe0-0xefe3]
[ 0.103710] pci 0000:00:05.0: reg 20 io port: [0xef90-0xef9f]
[ 0.103718] pci 0000:00:05.0: reg 24 io port: [0xe480-0xe4ff]
[ 0.103747] pci 0000:00:05.0: PME# supported from D3cold
[ 0.103752] pci 0000:00:05.0: PME# disabled
[ 0.103798] pci 0000:00:08.0: reg 10 32bit mmio: [0xdfff3000-0xdfff3fff]
[ 0.103807] pci 0000:00:08.0: reg 14 io port: [0xe000-0xe0ff]
[ 0.103859] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 0.103865] pci 0000:00:08.0: PME# disabled
[ 0.103908] pci 0000:00:0a.0: reg 10 32bit mmio: [0xdfff2c00-0xdfff2fff]
[ 0.103963] pci 0000:00:0a.0: supports D1 D2
[ 0.104033] pci 0000:00:0b.0: reg 10 io port: [0xee00-0xeeff]
[ 0.104042] pci 0000:00:0b.0: reg 14 32bit mmio: [0xdfff2800-0xdfff28ff]
[ 0.104093] pci 0000:00:0b.0: supports D1 D2
[ 0.104095] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold
[ 0.104101] pci 0000:00:0b.0: PME# disabled
[ 0.104193] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.104201] pci 0000:01:00.0: reg 14 32bit mmio: [0xdfee0000-0xdfefffff]
[ 0.104208] pci 0000:01:00.0: reg 18 io port: [0xdc00-0xdc7f]
[ 0.104247] pci 0000:01:00.0: supports D1 D2
[ 0.104292] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.104298] pci 0000:00:01.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 0.104304] pci 0000:00:01.0: bridge 32bit mmio pref: [0xcfd00000-0xdfcfffff]
[ 0.104315] pci_bus 0000:00: on NUMA node 0
[ 0.104324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.112625] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.112795] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.112946] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.113096] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.113244] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.113393] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.113541] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.113699] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.114025] SCSI subsystem initialized
[ 0.114161] libata version 3.00 loaded.
[ 0.114320] usbcore: registered new interface driver usbfs
[ 0.114350] usbcore: registered new interface driver hub
[ 0.114408] usbcore: registered new device driver usb
[ 0.114661] ACPI: WMI: Mapper loaded
[ 0.114665] PCI: Using ACPI for IRQ routing
[ 0.114895] Bluetooth: Core ver 2.15
[ 0.114995] NET: Registered protocol family 31
[ 0.114999] Bluetooth: HCI device and connection manager initialized
[ 0.115003] Bluetooth: HCI socket layer initialized
[ 0.115007] NetLabel: Initializing
[ 0.115009] NetLabel: domain hash size = 128
[ 0.115010] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.115031] NetLabel: unlabeled traffic allowed by default
[ 0.117596] pnp: PnP ACPI init
[ 0.117639] ACPI: bus type pnp registered
[ 0.123950] pnp: PnP ACPI: found 14 devices
[ 0.123956] ACPI: ACPI bus type pnp unregistered
[ 0.123963] PnPBIOS: Disabled by ACPI PNP
[ 0.124019] system 00:08: ioport range 0x290-0x297 has been reserved
[ 0.124029] system 00:09: ioport range 0x480-0x48f has been reserved
[ 0.124033] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.124036] system 00:09: ioport range 0x800-0x8df has been reserved
[ 0.124040] system 00:09: ioport range 0x8e0-0x8ff has been reserved
[ 0.124045] system 00:09: iomem range 0xffe80000-0xffefffff has been reserved
[ 0.124052] system 00:0a: ioport range 0x900-0x90f has been reserved
[ 0.124057] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.124060] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.124064] system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.124073] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.124076] system 00:0d: iomem range 0xc0000-0xdffff could not be reserved
[ 0.124080] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.124084] system 00:0d: iomem range 0x100000-0x2dfeffff could not be reserved
[ 0.158833] AppArmor: AppArmor Filesystem Enabled
[ 0.158868] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.158874] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.158881] pci 0000:00:01.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.158887] pci 0000:00:01.0: PREFETCH window: 0xcfd00000-0xdfcfffff
[ 0.158908] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.158912] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.158915] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.158918] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 0.158921] pci_bus 0000:01: resource 2 pref mem [0xcfd00000-0xdfcfffff]
[ 0.158980] NET: Registered protocol family 2
[ 0.159117] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.159666] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.161114] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.161861] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.161871] TCP reno registered
[ 0.162096] NET: Registered protocol family 1
[ 0.162213] Trying to unpack rootfs image as initramfs...
[ 0.434693] Freeing initrd memory: 7470k freed
[ 0.446258] cpufreq-nforce2: No nForce2 chipset.
[ 0.446309] Scanning for low memory corruption every 60 seconds
[ 0.446475] audit: initializing netlink socket (disabled)
[ 0.446504] type=2000 audit(1260619120.444:1): initialized
[ 0.455672] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.457395] VFS: Disk quotas dquot_6.5.2
[ 0.457503] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.458328] fuse init (API version 7.12)
[ 0.458468] msgmni has been set to 1434
[ 0.458867] alg: No test for stdrng (krng)
[ 0.458897] io scheduler noop registered
[ 0.458901] io scheduler anticipatory registered
[ 0.458903] io scheduler deadline registered
[ 0.459005] io scheduler cfq registered (default)
[ 0.544051] pci 0000:01:00.0: Boot video device
[ 0.544209] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.544244] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.544427] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.544434] ACPI: Power Button [PWRF]
[ 0.544511] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.544515] ACPI: Power Button [PWRB]
[ 0.544756] ACPI: Invalid PBLK length [0]
[ 0.544916] processor LNXCPU:00: registered as cooling_device0
[ 0.548431] isapnp: Scanning for PnP cards...
[ 0.688045] Switched to high resolution mode on CPU 0
[ 0.902230] isapnp: No Plug & Play device found
[ 0.903785] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.903928] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.904088] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.904562] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.904713] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.904823] alloc irq_desc for 19 on node -1
[ 0.904827] alloc kstat_irqs on node -1
[ 0.904839] serial 0000:00:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.904983] 0000:00:08.0: ttyS2 at I/O 0xe008 (irq = 19) is a 16450
[ 0.905063] 0000:00:08.0: ttyS3 at I/O 0xe010 (irq = 19) is a 8250
[ 0.905090] Couldn't register serial port 0000:00:08.0: -28
[ 0.906332] brd: module loaded
[ 0.906967] loop: module loaded
[ 0.907122] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.907375] sata_sis 0000:00:05.0: version 1.0
[ 0.907407] alloc irq_desc for 17 on node -1
[ 0.907410] alloc kstat_irqs on node -1
[ 0.907421] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.907428] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[ 0.907631] scsi0 : sata_sis
[ 0.907821] scsi1 : sata_sis
[ 0.908408] ata1: SATA max UDMA/133 cmd 0xeff0 ctl 0xefe4 bmdma 0xef90 irq 17
[ 0.908415] ata2: SATA max UDMA/133 cmd 0xefa8 ctl 0xefe0 bmdma 0xef98 irq 17
[ 0.908972] pata_sis 0000:00:02.5: version 0.5.2
[ 0.908997] alloc irq_desc for 16 on node -1
[ 0.909000] alloc kstat_irqs on node -1
[ 0.909011] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.909309] scsi2 : pata_sis
[ 0.909458] scsi3 : pata_sis
[ 0.910402] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.910407] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.910900] Fixed MDIO Bus: probed
[ 0.910952] PPP generic driver version 2.4.2
[ 0.911140] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.911193] alloc irq_desc for 23 on node -1
[ 0.911197] alloc kstat_irqs on node -1
[ 0.911209] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.911238] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 0.911340] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 0.911394] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported
[ 0.911423] ehci_hcd 0000:00:03.3: irq 23, io mem 0xdfff7000
[ 0.920013] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 0.920179] usb usb1: configuration #1 chosen from 1 choice
[ 0.920232] hub 1-0:1.0: USB hub found
[ 0.920250] hub 1-0:1.0: 8 ports detected
[ 0.920361] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.920413] alloc irq_desc for 20 on node -1
[ 0.920417] alloc kstat_irqs on node -1
[ 0.920428] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.920454] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 0.920546] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 0.920588] ohci_hcd 0000:00:03.0: irq 20, io mem 0xdfff4000
[ 0.978128] usb usb2: configuration #1 chosen from 1 choice
[ 0.978184] hub 2-0:1.0: USB hub found
[ 0.978201] hub 2-0:1.0: 3 ports detected
[ 0.978292] alloc irq_desc for 21 on node -1
[ 0.978296] alloc kstat_irqs on node -1
[ 0.978305] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.978328] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 0.978404] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 0.978442] ohci_hcd 0000:00:03.1: irq 21, io mem 0xdfff5000
[ 1.034113] usb usb3: configuration #1 chosen from 1 choice
[ 1.034158] hub 3-0:1.0: USB hub found
[ 1.034175] hub 3-0:1.0: 3 ports detected
[ 1.034261] alloc irq_desc for 22 on node -1
[ 1.034265] alloc kstat_irqs on node -1
[ 1.034275] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.034299] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 1.034369] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[ 1.034407] ohci_hcd 0000:00:03.2: irq 22, io mem 0xdfff6000
[ 1.090128] usb usb4: configuration #1 chosen from 1 choice
[ 1.090175] hub 4-0:1.0: USB hub found
[ 1.090192] hub 4-0:1.0: 2 ports detected
[ 1.090284] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.090446] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.090450] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.090595] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.090939] ata3.00: ATAPI: LITE-ON DVDRW LH-18A1P, GL0F, max UDMA/66
[ 1.091222] mice: PS/2 mouse device common for all mice
[ 1.091361] rtc_cmos 00:02: RTC can wake from S4
[ 1.091428] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.091461] rtc0: alarms up to one month, 114 bytes nvram
[ 1.091641] device-mapper: uevent: version 1.0.3
[ 1.091849] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 1.092034] device-mapper: multipath: version 1.1.0 loaded
[ 1.092040] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.092309] EISA: Probing bus 0 at eisa.0
[ 1.092348] EISA: Detected 0 cards.
[ 1.092459] cpuidle: using governor ladder
[ 1.092463] cpuidle: using governor menu
[ 1.093228] TCP cubic registered
[ 1.093408] NET: Registered protocol family 10
[ 1.094030] lo: Disabled Privacy Extensions
[ 1.094444] NET: Registered protocol family 17
[ 1.094517] Bluetooth: L2CAP ver 2.13
[ 1.094520] Bluetooth: L2CAP socket layer initialized
[ 1.094524] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.094525] Bluetooth: SCO socket layer initialized
[ 1.094604] Bluetooth: RFCOMM TTY layer initialized
[ 1.094608] Bluetooth: RFCOMM socket layer initialized
[ 1.094611] Bluetooth: RFCOMM ver 1.11
[ 1.094674] Using IPI No-Shortcut mode
[ 1.094812] PM: Resume from disk failed.
[ 1.094835] registered taskstats version 1
[ 1.094956] Magic number: 5:546:984
[ 1.095059] rtc_cmos 00:02: setting system clock to 2009-12-12 11:58:41 UTC (1260619121)
[ 1.095064] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.095067] EDD information not available.
[ 1.109925] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.120403] ata3.00: configured for UDMA/66
[ 1.228064] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.236375] ata1.00: ATA-6: ST380011AS, 3.00, max UDMA/133
[ 1.236379] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.252383] ata1.00: configured for UDMA/133
[ 1.252593] scsi 0:0:0:0: Direct-Access ATA ST380011AS 3.00 PQ: 0 ANSI: 5
[ 1.252825] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.252928] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.253012] sd 0:0:0:0: [sda] Write Protect is off
[ 1.253017] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.253058] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.253297] sda: sda1 sda2 sda3 sda4
[ 1.282796] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.480012] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 1.582857] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.583993] scsi 2:0:0:0: CD-ROM LITE-ON DVDRW LH-18A1P GL0F PQ: 0 ANSI: 5
[ 1.589251] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.589258] Uniform CD-ROM driver Revision: 3.20
[ 1.589436] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.589533] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.693161] usb 2-1: configuration #1 chosen from 1 choice
[ 1.744125] Freeing unused kernel memory: 540k freed
[ 1.744948] Write protecting the kernel text: 4568k
[ 1.744982] Write protecting the kernel read-only data: 1836k
[ 2.010711] Linux agpgart interface v0.103
[ 2.014353] agpgart-sis 0000:00:00.0: SiS chipset [1039/0661]
[ 2.021678] Floppy drive(s): fd0 is 1.44M
[ 2.040270] FDC 0 is a post-1991 82077
[ 2.084400] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 2.084583] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.084630] 8139cp 0000:00:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.093681] 8139too Fast Ethernet driver 0.9.28
[ 2.093769] 8139too 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.094962] eth0: RealTek RTL8139 at 0xee00, 00:17:31:15:fd:e9, IRQ 19
[ 2.213259] usbcore: registered new interface driver hiddev
[ 2.237356] input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/input/input4
[ 2.237491] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:03.0-1/input0
[ 2.237526] usbcore: registered new interface driver usbhid
[ 2.237531] usbhid: v2.6:USB HID core driver
[ 3.701246] PM: Starting manual resume from disk
[ 3.701255] PM: Resume from partition 8:3
[ 3.701257] PM: Checking hibernation image.
[ 3.701517] PM: Resume from disk failed.
[ 3.729378] EXT4-fs (sda2): barriers enabled
[ 3.738146] kjournald2 starting: pid 329, dev sda2:8, commit interval 5 seconds
[ 3.738182] EXT4-fs (sda2): delayed allocation enabled
[ 3.738188] EXT4-fs: file extents enabled
[ 3.739379] EXT4-fs: mballoc enabled
[ 3.739411] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 4.387647] type=1505 audit(1260619124.788:2): operation="profile_load" pid=352 name=/usr/share/gdm/guest-session/Xsession
[ 4.399095] type=1505 audit(1260619124.800:3): operation="profile_load" pid=353 name=/sbin/dhclient3
[ 4.399891] type=1505 audit(1260619124.800:4): operation="profile_load" pid=353 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.400357] type=1505 audit(1260619124.804:5): operation="profile_load" pid=353 name=/usr/lib/connman/scripts/dhclient-script
[ 4.429292] type=1505 audit(1260619124.832:6): operation="profile_load" pid=354 name=/usr/bin/evince
[ 4.442017] type=1505 audit(1260619124.844:7): operation="profile_load" pid=354 name=/usr/bin/evince-previewer
[ 4.449741] type=1505 audit(1260619124.852:8): operation="profile_load" pid=354 name=/usr/bin/evince-thumbnailer
[ 4.468741] type=1505 audit(1260619124.872:9): operation="profile_load" pid=356 name=/usr/lib/cups/backend/cups-pdf
[ 4.469703] type=1505 audit(1260619124.872:10): operation="profile_load" pid=356 name=/usr/sbin/cupsd
[ 5.776535] Adding 1542232k swap on /dev/sda3. Priority:-1 extents:1 across:1542232k
[ 5.977038] udev: starting version 147
[ 6.043304] EXT4-fs (sda2): internal journal on sda2:8
[ 6.766369] lp: driver loaded but no devices found
[ 7.202603] parport_pc 00:07: reported by Plug and Play ACPI
[ 7.202721] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 7.287332] lp0: using parport0 (interrupt-driven).
[ 7.376452] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.379192] ppdev: user-space parallel port driver
[ 7.426666] Linux video capture interface: v2.00
[ 7.678085] EXT4-fs (sda4): barriers enabled
[ 7.694431] kjournald2 starting: pid 577, dev sda4:8, commit interval 5 seconds
[ 7.694748] EXT4-fs (sda4): internal journal on sda4:8
[ 7.694753] EXT4-fs (sda4): delayed allocation enabled
[ 7.694757] EXT4-fs: file extents enabled
[ 7.695036] EXT4-fs: mballoc enabled
[ 7.695070] EXT4-fs (sda4): mounted filesystem with ordered data mode
[ 8.108303] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 8.108396] alloc irq_desc for 18 on node -1
[ 8.108401] alloc kstat_irqs on node -1
[ 8.108412] saa7134 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.108421] saa7130[0]: found at 0000:00:0a.0, rev: 1, irq: 18, latency: 64, mmio: 0xdfff2c00
[ 8.108430] saa7130[0]: subsystem: 1131:2341, board: Encore ENLTV [card=106,autodetected]
[ 8.108461] saa7130[0]: board init: gpio is 5d31ff
[ 8.108578] input: saa7134 IR (Encore ENLTV) as /devices/pci0000:00/0000:00:0a.0/input/input5
[ 8.108656] IRQ 18/saa7130[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 8.260043] saa7130[0]: i2c eeprom 00: 31 11 41 23 08 20 1c 55 43 43 a9 1c 55 43 43 a9
[ 8.260058] saa7130[0]: i2c eeprom 10: ff ff 00 00 31 30 4d 4f 4f 4e 53 37 31 33 30 20
[ 8.260070] saa7130[0]: i2c eeprom 20: 41 41 48 53 ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.260081] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.260092] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.260102] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.260113] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.260124] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.260135] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.260146] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.260156] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.260167] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.260178] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.260189] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.260200] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.260210] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.260227] i2c-adapter i2c-0: Invalid 7-bit address 0x7a
[ 8.803768] All bytes are equal. It is not a TEA5767
[ 8.803916] tuner 0-0060: chip found @ 0xc0 (saa7130[0])
[ 8.959124] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.976170] tuner-simple 0-0060: creating new instance
[ 8.976178] tuner-simple 0-0060: type set to 69 (Tena TNF 5335 and similar models)
[ 9.006291] saa7130[0]: registered device video0 [v4l2]
[ 9.006338] saa7130[0]: registered device vbi0
[ 9.006376] saa7130[0]: registered device radio0
[ 9.045893] saa7134 ALSA driver for DMA sound loaded
[ 9.045902] saa7130[0]/alsa: Encore ENLTV doesn't support digital audio
[ 9.158300] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9.492086] intel8x0_measure_ac97_clock: measured 54041 usecs (2599 samples)
[ 9.492093] intel8x0: clocking to 48000
[ 10.224329] __ratelimit: 3 callbacks suppressed
[ 10.224335] type=1505 audit(1260637130.628:12): operation="profile_replace" pid=744 name=/usr/share/gdm/guest-session/Xsession
[ 10.227712] type=1505 audit(1260637130.628:13): operation="profile_replace" pid=745 name=/sbin/dhclient3
[ 10.228650] type=1505 audit(1260637130.632:14): operation="profile_replace" pid=745 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 10.229078] type=1505 audit(1260637130.632:15): operation="profile_replace" pid=745 name=/usr/lib/connman/scripts/dhclient-script
[ 10.239276] type=1505 audit(1260637130.640:16): operation="profile_replace" pid=746 name=/usr/bin/evince
[ 10.265696] type=1505 audit(1260637130.668:17): operation="profile_replace" pid=746 name=/usr/bin/evince-previewer
[ 10.273810] type=1505 audit(1260637130.676:18): operation="profile_replace" pid=746 name=/usr/bin/evince-thumbnailer
[ 10.288274] type=1505 audit(1260637130.692:19): operation="profile_replace" pid=754 name=/usr/lib/cups/backend/cups-pdf
[ 10.289245] type=1505 audit(1260637130.692:20): operation="profile_replace" pid=754 name=/usr/sbin/cupsd
[ 10.293706] type=1505 audit(1260637130.696:21): operation="profile_replace" pid=755 name=/usr/sbin/tcpdump
[ 13.679934] eth0: link down
[ 13.680191] ADDRCONF(NETDEV_UP): eth0: link is not ready
Module Size Used by
binfmt_misc 8356 1
iptable_filter 3100 0
snd_intel8x0 30168 2
snd_ac97_codec 101216 1 snd_intel8x0
ac97_bus 1532 1 snd_ac97_codec
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
saa7134_alsa 12128 0
snd_pcm 75296 4 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,saa7134_alsa
tuner_simple 14832 1
tuner_types 14396 1 tuner_simple
ip_tables 11692 1 iptable_filter
snd_seq_dummy 2656 0
x_tables 16544 1 ip_tables
snd_seq_oss 28576 0
snd_seq_midi 6432 0
snd_rawmidi 22208 1 snd_seq_midi
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
tea5767 6720 0
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 22276 2 snd_pcm,snd_seq
tuner 21540 1
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 59204 15 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,saa7134_alsa,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 7264 1 snd
saa7134 152616 1 saa7134_alsa
snd_page_alloc 9156 2 snd_intel8x0,snd_pcm
ir_common 48512 1 saa7134
v4l2_common 17500 2 tuner,saa7134
videodev 36736 3 tuner,saa7134,v4l2_common
v4l1_compat 14496 1 videodev
videobuf_dma_sg 12544 2 saa7134_alsa,saa7134
videobuf_core 17952 2 saa7134,videobuf_dma_sg
tveeprom 11872 1 saa7134
ppdev 6688 0
shpchp 32272 0
parport_pc 31940 1
lp 8964 0
parport 35340 3 ppdev,parport_pc,lp
usbhid 38208 0
8139too 22620 0
8139cp 19260 0
mii 5212 2 8139too,8139cp
floppy 54916 0
sis_agp 6972 1
agpgart 34988 1 sis_agp
