I used the "find" command as you provided and found two entries which I
deleted. I then went to install the agrsm06pci-2.1.80-20090825 and
received the following results:
./agrinst
Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
some files needed for installation are missing
I stopped there and dropped this note for help.
\Thanks.
Marvin Stodolsky wrote:
Martin,
agrsm06pci-2.1.80~20090825.tar.gz is the only package which may
provide service for the 11c1:0630 chipset
Best check that multiple driver sets are not installed somewhere:
$ find /lib/modules/$(uname -r) -name agr*.ko
If there are multiple. Best delete all and rerun the
agrsm06pci-2.1.80~20090825.tar.gz install.
If this was not the last installed delete all and rerun the
agrsm06pci-2.1.80~20090825.tar.gz install
It is not clear from your message below as to whether the wvdial
package is installed or not.
If not, from the bottom of http://linmodems.technion.ac.il/packages/
get the wvdial_jaunty_i386.zip
Under Linux
$ unzip wv*.zip
$ cd wvdial_jaunty_i386
$ ls
install with
$ sudo dpkg -i *.deb
Then rerun the
$ sudo agrsm-test
If successful, it will write a file /etc/wvdial.conf . Edit it with:
$ sudo gedit /etc/wvdial.conf
putting in personal info while deleting symbols: < > ;
Then try a dialout with:
$ sudo wvdial
Upon a reboot the modem will be set up by:
$ sudo modprobe agrserial
You can check porsts with:
$ ls -l /dev/AGR* /dev/SAGR
and for driver loading:
$ lsmod | grep agr
Once you are online under Linux install the dkms driver update utility with:
$ sudo apt-get update
$ sudo apt-get install dkms
MarvS
On Sat, Oct 3, 2009 at 1:34 PM, Martin Lupcke
<mossianin_lbcmi@xxxxxxxxxx> wrote:
Several weeks ago, I sent a message back that I had tried a couple of driver
packages to get my 11c1:0630 modem working. Unfortunately, I have lost
track since then. This is what I reported at that time.
I attempted to install the "agrsm-2.1.80limited" driver. The results of the
install are shown below:
./agrinst
Installing Agere Softmodem driver version 2.1.80-Red Flag NE 5.0
some files needed for installation are missing
For kicks, I ran the agrsm-test. The results of that are listed below:
Loading drivers:
Drivers loaded:
agrserial 11088 0
agrmodem 1184932 1 agrserial
and symbolic link created:
lrwxrwxrwx 1 root root 12 Sep 5 18:40 /dev/ttySAGR -> /dev/ttyAGS3
Checking for utility wvdialconf
Found /usr/bin/wvdialconf, preparing to run:
wvdialconf /etc/wvdial.conf
A reboot may be necessary before modem detection through:
sudo modprobe agrserial
Which will load agrmodem, agrserial and create the symbolic link needed
for:
sudo wvdialconf
I also tried to install the "agrsm06pci-2.1.80~20090825" with the same
result as above.
Can you walk me thru what needs to be done now?
Thanks for all the help.
Jacques Goldberg wrote:
DONE but Martin the complete URL is
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm06pci-2.1.80~20090825.tar.gz
not just agrsm.tar.gz (as quoted by Marv just to show how one unpacks such
a kind of file).
Jacques
Marvin Stodolsky wrote:
Martin
Attached is the tarball packaging.
# tar zxvf agrsm.tar.gz
and see the 1stReadme.txt therein.
If you are not using the Deb installer previously sent,
the best place to unpack it is in /usr/src/ to potentially enable the
dkms support.
Jacques,
put in the 11c11040 folder please.
MarvS
On Sat, Aug 29, 2009 at 7:24 PM, Marvin
Stodolsky<marvin.stodolsky@xxxxxxxxx> wrote:
http://linmodems.technion.ac.il/packages/ltmodem11c11040/
is the correct address, but the server seems to be offline now.
This happens occassional
John
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ is the
correct address. I'll also send you the Debian installer variant
MarvS
On Sat, Aug 29, 2009 at 5:21 PM, Martin
Lupcke<mossianin_lbcmi@xxxxxxxxxx> wrote:
I have been trying to follow the recent messages on the 11c1:0620 &
0630
modems. On the 24th, Jacques put a file at
http://linmodems.technion.ac.il/packages/ltmodem11c11040/agrsm-2.1.80-limited.tar.gz
but I cannot find it. (The path 11c11040 does not appear to exist.)
Later, it seems like there were additional steps to install this, but
I got
totally lost trying to determine what should or should not be done.
Most
recently (below), it seems that John got an 0620 working in Ubuntu.
I am far from a Linux expert (obviously), but could someone help clear
this
up for me so I can try to get my 0630 working in PCLinux?
Thanks.
john31608@xxxxxxxxxx wrote:
Marvin:
I want you to know I have the agere SV92PP 11c10620 modem card now
running reliably. I went with a fresh reinstall of Ubuntu9.04 Jaunty
and
installation of the following:
agrsm-tools_0.0.1_all.deb
dkms_2.0.21.1-Oubuntu3_all.deb
gnome-network-admin-2.22.1-Oubuntu1_i386.deb
Dial-up with jauntyDebs.tar.Izima This is a package consisting of
wvdial
with dependencies
Finally agrsm06pci_2.1.80~20090825_i386.deb
It was all double click and go with installation of agrmodem.ko and
agrserial.ko to /lib/modules/2.6.28-11-generic/updates/dkms
It looks like at this point from the terminal sudo agrsm-test would
have taken me to completion save for entering my name, password and
phone
number in ./etc/wvdial.conf. Everything is spelled out as you go
I had tried after running agrsm06pci_2.1.80~20090825_i386.deb
sudo modprobe agrmodem
sudo modprobe agrserial
etc, etc using the page "LSI/AgereSystems 11c11040 chipset support
installation ,using dkms tools" from the Linmodems discussion board of
20DEC2008 as a guide but I got lost trying to find the file wvtest.
sudo
agrsm-test rescued me. The modem was found on /dev/ttySAGR. While
trying
to configure the network tools point to point connection interface I
lost
the connection and it appears the file /dev/ttySAGR was lost but sudo
agrsm-test brought it right back. I then had to reenter my name,
phone
and
PW but it all went pretty smoothly. My hat is off to you and the
others
who
have been so patient with all this. Thank You
Yours truly, John W
