Davide RE: Phone = 0230900000 If you must pass through a switch board, use a comma to insert a one second pause Phone = 0,230900000 ,, would be a two second pause. Otherwise your test wvdial.conf is OK MarvS On Tue, Nov 17, 2009 at 5:28 AM, <davidealiperti@xxxxxxxxxxx> wrote: > hi, > > now the modem seems working but when I run the wvdial I got NO DIALTONE and > NO CARRIER messages, any suggestion ? > > here the result: > marina@marina-desktop:/usr/sbin$ sudo wvdial > [sudo] password for marina: > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=34 > ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=34 > OK > --> Modem initialized. > --> Sending: ATDT0230900000 > --> Waiting for carrier. > ATDT0230900000 > NO DIALTONE > --> No dial tone. Trying again in 5 seconds. > --> Sending: ATDT0230900000 > --> Waiting for carrier. > ATDT0230900000 > NO DIALTONE > --> No dial tone. Trying again in 5 seconds. > --> Sending: ATDT0230900000 > ...... > > wvdial.conf > [Dialer Defaults] > Init1 = ATZ > #Init3 = ATX3 > #Init1 = ATX3 > #Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=34 > Modem Type = Analog Modem > Baud = 460800 > New PPPD = yes > Modem = /dev/ttySL0 > ISDN = 0 > #Phone = 7020012100 > Phone = 0230900000 > Password = xxxxxxxxxxxxx > Username = xxxxxxxxxxxxxx > Carrier Check = no > Stupid Mode = off > Abort on No Dialtone = off > > many thanks >
