/dev/ttySL0 is just a symbolic link that inherits the permissions of its Target. chmod must be used on the Taget. For example, if the Target were /dev/pts/0 $ ls -l /dev/pts/* crw--w---- 1 marv tty 136, 0 2009-11-08 09:14 /dev/pts/0 $ sudo chmod 777 /dev/pts/0 $ ls -l /dev/pts/* crwxrwxrwx 1 marv tty 136, 0 2009-11-08 09:21 /dev/pts/0 MarvS On Sun, Nov 8, 2009 at 3:09 AM, Arturo Neri <ciornjeja@xxxxxxxxx> wrote: > La risposta del sistema dice che il modem e' attivo. Quindi Efax > dovrebbe funzionare. > Hai controllato I permessi? > Comunque, se non lo hai gia fatto riattiva il modem con: > sudo slmodemd -c SPAIN --alsa hw:0,6 > controlla che la risposta del sistema sia uguale a quella che hai gia scritto. > > Nella finestra del terminale digita: > sudo chmod 777 /dev/ttySL0 > poi apri Efax e riprova ad inviare un fax > > 2009/11/7 X Y <rapaz_78@xxxxxxxx>: >> Hola, Marv. >> >> Acabo de hacer lo que me dijiste y seguimos avanzando algo, aunque todavía no puedo usar el modem como fax (no he probado a usarlo para conectarme a Internet porque para eso utilizo un router ADSL). Después de desinstalar el sl-modem-daemon y ejecutar otra vez el setup manual, al teclear la orden sudo slmodemd -c SPAIN --alsa hw:0,6, obtuve el siguiente mensaje: >> >> SmartLink Soft Modem: version 2.9.11 Aug 3 2008 22:31:06 >> symbolic link `/dev/ttySL0' -> `/dev/pts/0' created. >> modem `hw:0,6' created. TTY is `/dev/pts/0' >> Use `/dev/ttySL0' as modem device, Ctrl+C for termination. >> >> Pero al intentar enviar un fax con efax-gtk (poniendo ttySL0 en el apartado serial device, en la ficha Modem), obtengo el siguiente error en el programa: >> >> efax-0.9a: 20:54:18 Error: can't open serial port /dev/ttySL0: No existe el fichero ó directorio >> efax-0.9a: 20:54:18 failed page /home/josem/abogada.ps.001 >> efax-0.9a: 20:54:18 finished - unrecoverable error >> >> A ver si podemos seguir avanzando, y muchas gracias una vez más por tu ayuda, >> >> Alfredo >> >> >> >> ----- Mensaje original ---- >> De: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >> Para: X Y <rapaz_78@xxxxxxxx> >> CC: Arturo Neri <ciornjeja@xxxxxxxxx>; discuss@xxxxxxxxxxxxx >> Enviado: sáb,7 noviembre, 2009 14:50 >> Asunto: Re: 0x10573055 chipset faxing through /dev/pts/N ports? WAS: Alfredo, Spain, kernel 2.6.28-16-generic >> >> The sl-modem-daemon scripts are confusing your situation, by trying to >> use slamr, which is not appropriate for your HDA card hosted modem >> Uninstall them: >> $ sudo apt-get remove sl-modem-daemon >> >> The audio setting are not relevant to the modem situation/ >> >> Tey again the manual setup, which relies on the already loaded >> snd-hda-intel audio+modem driver: >> $ sudo slmodemd -c SPAIN --alsa hw:0,6 >> >> MarvS >> >> On Sat, Nov 7, 2009 at 6:14 AM, X Y <rapaz_78@xxxxxxxx> wrote: >>> Hola a todos. >>> >>> Bueno, parece que poco a poco vamos progesando. Marv, al usar sudo wvdialconf /etc/wvdial.conf parece que todo fue bien, porque devolvía OK a los diferentes comandos AT. Sin embargo, con el comando sudo /etc/init.d/sl-modem-daemon restart obtuve la siguiente respuesta: >>> >>> Shutting down SmartLink Modem driver normally. >>> Unloading modem driver from kernel ... none found. >>> Only access through ALSA is available on amd64 but slamr driver was chosen! >>> Make sure that an ALSA driver for your chipset is available and is loaded >>> and that access to SmartLink modem components is supported by it. >>> >>> También, al intentarlo de nuevo con la orden sudo slmodemd -c SPAIN --alsa hw:0,6 sigue dando el error de siempre: >>> >>> error: alsa setup: cannot open playback device 'hw:0,6': Device or resource busy >>> error: cannot setup device `hw:0,6' >>> >>> ¿Podría deberse a que la tarjeta de sonido está capturando sonido del micrófono incorporado? Me extrañaría, porque nunca conseguí grabar nada con él (en el grabador de sonidos no veo dónde seleccionarlo). Mi notebook también posee un conector para auriculares y otro para un micrófono externo. Os adjunto unas capturas de pantalla del control de volumen por si tuviera algo que ver con el problema. >>> >>> Un saludo y gracias de nuevo, >>> >>> Alfredo >>> >>> >>> ----- Mensaje original ---- >>> De: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >>> Para: Arturo Neri <ciornjeja@xxxxxxxxx> >>> CC: X Y <rapaz_78@xxxxxxxx>; discuss@xxxxxxxxxxxxx >>> Enviado: vie,6 noviembre, 2009 00:13 >>> Asunto: Re: 0x10573055 chipset faxing through /dev/pts/N ports? WAS: Alfredo, Spain, kernel 2.6.28-16-generic >>> >>> Alfredo, >>> >>> In your original report: >>> Checking for modem support lines: >>> -------------------------------------- >>> /device/modem symbolic link: lrwxrwxrwx 1 root root 6 >>> 2009-11-01 16:04 /dev/modem -> ttySL0 >>> slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10 >>> 2009-11-01 16:04 /dev/ttySL0 -> /dev/pts/0 >>> >>> This would imply that the sl-modem-daemon package is installed, >>> and is automatically setting up the modem through the bootup scripts. >>> Thus there is a failure when you try to use slmodemd, when it is already setup >>> >>> To test try running: >>> $ sudo wvdialconf /etc/wvdial.conf >>> which should find the modem. >>> If so you could edit for a dialout through your Internet Provider with: >>> $ sudo gedit /etc/wvdial.conf >>> >>> Change the default country from USA to SPAIN with: >>> $ sudo gedit /etc/default/sl-modem-daemon >>> Then >>> $ sudo /etc/init.d/sl-modem-daemon restart >>> >>> MarvS >>> >>> >>> >>> On Thu, Nov 5, 2009 at 3:26 PM, Arturo Neri <ciornjeja@xxxxxxxxx> wrote: >>>> Alfredo >>>> ti suggerisco di prestare attenzione al destinatario del tuo >>>> messaggio. La tua risposta era destinata a me e per conoscenza a >>>> Marvin e alla maling list. In questo modo c'e' il rischio che Marvin >>>> non lo legga. >>>> >>>> Ho riletto le opzioni del comando slmodemd e forse per ottenere >>>> indicazioni nel file di log bisogna dargli un valore all'opzione >>>> quindi ti consiglio di riprovare il comando in questo modo. >>>> $ sudo slmodemd --log=3 --alsa --debug=2 -c SPAIN hw:0,6 >>>> Se ottieni qualcosa nel file di log, mandalo a Marvin >>>> Buona fortuna >>>> >>>> 2009/11/5 X Y <rapaz_78@xxxxxxxx>: >>>>> Hola, soy Alfredo. >>>>> >>>>> He tenido que cambiar de cuenta porque me han cerrado momentáneamente (espero) la de hotmail porque creen que puedo estar haciendo spam (por los mensajes a y de este foro). >>>>> >>>>> Marv, hice lo que me pedías (Arturo, gracias por la traducción, aunque le había entendido) y me dio el mismo error (alsa setup: cannot open playback device 'hw:0,6': Device or resource busy //// error: cannot setup device `hw:0,6') y me generó un archivo vacío llamado slmodem.log.hw:0,6. >>>>> >>>>> >>>>> Un saludo >>>>> >>>>> Alfredo >>>>> >>>>> Thu, 5 Nov 2009 14:44:04 +0100 >>>>> Alfredo suppongo tu abbia capito quello che chiede Marvin. Comunque >>>>> devi eseguire il seguente comando: >>>>> $ sudo slmodemd --log --alsa --debug=2 -c SPAIN hw:0,6 >>>>> ed inviare a lui la risposta del sistema. Forse c'e' un errore nei >>>>> moduli di ALSA >>>>> >>>>> >>>>> 2009/11/5 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>: >>>>>> RE: > Maybe need to use ungrab winmodem? >>>>>> No, ungrab-winmodem is only necessary when the slamr driver is used. >>>>>> >>>>>> With The /proc/asound/pcm file reports: >>>>>> ----------------------- >>>>>> 00-00: ALC660-VD Analog : ALC660-VD Analog : playback 1 : capture 1 >>>>>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 >>>>>> -------- >>>>>> hw:0,6 is the proper device specification >>>>>> >>>>>> Likely a bug report will have to be filled to ALSA. Please do: >>>>>> $ sudo slmodemd --log --alsa --debug=2 -c SPAIN hw:0,6 >>>>>> Send us the log file which will be written out. >>>>>> >>>>>> MarvS >>>>>> >>>>>> On Thu, Nov 5, 2009 at 8:04 AM, Arturo Neri <ciornjeja@xxxxxxxxx> wrote: >>>>>>> Marvin >>>>>>> Now it is indispensable to your help. >>>>>>> $ sudo slmodemd -c SPAIN --alsa hw:0,6 issue this: >>>>>>> error: alsa setup: cannot open playback device 'hw:0,6': Device or resource busy >>>>>>> error: cannot setup device `hw:0,6' >>>>>>> I also advised this: >>>>>>> $ sudo slmodemd -c SPAIN --alsa modem:0 and 1 >>>>>>> but is worst >>>>>>> Maybe need to use ungrab winmodem? >>>>>>> Thanks >>>>>>> Arturo >>>>>>> >>>>>>> 2009/11/5 Alfredo M.H. <provisio@xxxxxxxxxx>: >>>>>>>> >>>>>>>> Arturo, he comprobado si el módulo snd-hda-intel estaba presente y la respuesta >>>>> es afirmativa. Después, probé con los comandos que me decías y obtuve los siguientes >>>>> resultados: >>>>>>>> >>>>>>>> Para el primero: >>>>>>>> error: alsa setup: cannot open playback device 'modem:0': Device or resource busy >>>>>>>> error: cannot setup device `modem:0' >>>>>>>> >>>>>>>> Para el segundo: >>>>>>>> error: mixer setup: attach hw:1 error: No such file or directory >>>>>>>> ALSA lib ../../src/confmisc.c:768:(parse card) cannot find card '1' >>>>>>>> ALSA lib ../../src/conf.c:3513:( snd config evaluate) function snd func card driver >>>>> returned error: No such file or directory >>>>>>>> ALSA lib ../../src/confmisc.c:392:(snd func concat) error evaluating strings >>>>>>>> ALSA lib ../../src/conf.c:3513:( snd config evaluate) function snd func concat returned >>>>> error: No such file or directory >>>>>>>> ALSA lib ../../src/confmisc.c:1251:(snd func refer) error evaluating name >>>>>>>> ALSA lib ../../src/conf.c:3513:( snd config evaluate) function snd func refer returned >>>>> error: No such file or directory >>>>>>>> ALSA lib ../../src/conf.c:3985:(snd config expand) Evaluate error: No such file >>>>> or directory >>>>>>>> ALSA lib ../../../src/pcm/pcm.c:2205:(snd pcm open noupdate) Unknown PCM cards.pcm.phoneline:CARD=1,DEV=0 >>>>>>>> error: alsa setup: cannot open playback device 'modem:1': No such file or directory >>>>>>>> error: cannot setup device `modem:1' >>>>>>>> >>>>>>>> Muchas gracias por tu ayuda y tu paciencia >>>>>>>> >>>>>>>> Alfredo >>>>>>>> >>>>>>>>> Date: Wed, 4 Nov 2009 20:37:06 +0100 >>>>>>>>> Subject: Re: 0x10573055 chipset faxing through /dev/pts/N ports? WAS: Alfredo, >>>>> Spain, kernel 2.6.28-16-generic >>>>>>>>> From: ciornjeja@xxxxxxxxx >>>>>>>>> To: provisio@xxxxxxxxxx >>>>>>>>> CC: marvin.stodolsky@xxxxxxxxx; olivares14031@xxxxxxxxx; discuss@xxxxxxxxxxxxx >>>>>>>>> >>>>>>>>> Prima di procedere ricontrolla con lsmod che il modulo snd-hda-intel >>>>>>>>> sia nell'elenco dei moduli attivi poi prova con: >>>>>>>>> $ sudo slmodemd -c SPAIN --alsa modem:0 >>>>>>>>> se anche cosi non va riprova con: >>>>>>>>> $ sudo slmodemd -c SPAIN --alsa modem:1 >>>>>>>>> Se anche cosi non va devo chiedere a Marvin e per questo e' opportuno >>>>>>>>> che tu quoti quello che risponde il sistema. >>>>>>>>> Lascia perdere mgetty non ti serve. >>>>>>>>> >>>>>>>>> 2009/11/4 Alfredo M.H. : >>>>>>>>>> >>>>>>>>>> Hola, Arturo. >>>>>>>>>> >>>>>>>>> >>>>>>>>> Hemos avanzado un poco, pero no del todo. Al ejecutar slmodemd con >>>>>>>> sudo obtuve un resultado satisfactorio, pero con la segunda orden que >>>>>>>> me comentabas, también con sudo, sigue dando el siguiente error: >>>>>>>>>> >>>>>>>>>> error: alsa setup: cannot open playback device 'hw:0,6': Device or resource busy >>>>>>>>>> error: cannot setup device `hw:0,6' >>>>>>>>>> >>>>>>>>> >>>>>>>>> Hace un momento estuve también mirando en el gestor de paquetes >>>>>>>> synaptic y me encontré con un paquete llamado mgetty (hay varios) que, >>>>>>>> supuestamente, sirve para implementar la capacidad de envío de faxes >>>>>>>> con el modem. Me dirijo no sólo a ti: ¿podría ser lo que necesito o no >>>>>>>> tiene nada que ver? >>>>>>>>>> >>>>>>>>>> Un saludo, >>>>>>>>>> >>>>>>>>>> Alfredo >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> Date: Wed, 4 Nov 2009 19:44:15 +0100 >>>>>>>>>>> Subject: Re: 0x10573055 chipset faxing through /dev/pts/N ports? WAS: Alfredo, >>>>> Spain, kernel 2.6.28-16-generic >>>>>>>>>>> From: ciornjeja@xxxxxxxxx >>>>>>>>>>> To: provisio@xxxxxxxxxx >>>>>>>>>>> CC: marvin.stodolsky@xxxxxxxxx; olivares14031@xxxxxxxxx; discuss@xxxxxxxxxxxxx >>>>>>>>>>> >>>>>>>>>>> Come supponevo, quindi rientra nella cartella SLMODEMD.gcc4.3 e digita: >>>>>>>>>>> $ sudo ./setup >>>>>>>>>>> se l'esito sara' positivo continua digitando: >>>>>>>>>>> $ sudo slmodemd -c SPAIN --alsa hw:0,6 >>>>>>>>>>> >>>>>>>>>>> 2009/11/4 Alfredo M.H. : >>>>>>>>>>>> >>>>>>>>>>>> Hola, Arturo. >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> En la ficha de permisos del archivo que me comentabas, consta que, >>>>>>>>>> tanto el propietario como el grupo es "root" y las listas desplegables >>>>>>>>>> donde se selecciona el acceso están desactivadas. También está marcada >>>>>>>>>> la casilla "Permitir ejecutar el archivo como un programa". >>>>>>>>>>>> >>>>>>>>>>>> Un saludo, >>>>>>>>>>>> >>>>>>>>>>>> Alfredo >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> Date: Wed, 4 Nov 2009 17:34:09 +0100 >>>>>>>>>>> >>>>>>>>>>>> Subject: Re: 0x10573055 chipset faxing through /dev/pts/N >>>>>>>>>> ports? WAS: Alfredo, Spain, kernel 2.6.28-16-generic >>>>>>>>>>>>> From: ciornjeja@xxxxxxxxx >>>>>>>>>>>>> To: provisio@xxxxxxxxxx >>>>>>>>>>>>> CC: marvin.stodolsky@xxxxxxxxx; olivares14031@xxxxxxxxx; discuss@xxxxxxxxxxxxx >>>>>>>>>>>>> >>>>>>>>>>>>> Ciao Alfredo, >>>>>>>>>>>>> il sistema dice che il demone slmodemd e' gia installato, >>>>>>>>>>>>> probabilmente Ubuntu stesso quando e' stato installato. >>>>>>>>>>>>> Apri Nautilus ovvero Sistema -> Computer vai nella cartella /usr/sbin/ >>>>>>>>>>>>> cerca il file slmodemd clicca col destro e seleziona proprieta'. >>>>>>>>>>>>> Scrivimi cosa leggi alla riga proprietario. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> 2009/11/4 Alfredo M.H. : >>>>>>>>>>>>>> >>>>>>>>>>>>>> Hola de nuevo. >>>>>>>>>>>>>> >>>>>>>>>>>>>> En primer lugar, gracias a todos por vuestra ayuda. >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Arturo, hice lo que me decías y, después de comprobar con el >>>>>>>>>>>> comando lsmod que snd-hda-intel estaba presente, ejecuté ./slmodemd y >>>>>>>>>>>> obtuve el siguiente error o problema (copio desde la ventana de >>>>>>>>>>>> terminal): >>>>>>>>>>>>>> >>>>>>>>>>>>>> josem@josem-laptop:~/Descargas Web/SLMODEMD.gcc4.3$ ./setup >>>>>>>>>>>>>> >>>>>>>>>>>>>> There is already installed a slmodemd of version: 2.9.11 >>>>>>>>>>>>>> There is a file /usr/sbin/slmodemd >>>>>>>>>>>>>> Moving /usr/sbin/slmodemd to /usr/sbin/slmodemd.2.9.11 >>>>>>>>>>>>>> mv: no se puede mover «/usr/sbin/slmodemd» a «/usr/sbin/slmodemd.2.9.11»: >>>>> Permiso denegado >>>>>>>>>>>>>> Copying slmodemd to /usr/sbin/slmodemd, making exectuable, and checking for >>>>> version 2.9.11 >>>>>>>>>>>>>> cp: no se puede crear el fichero regular «/usr/sbin/slmodemd»: Permiso denegado >>>>>>>>>>>>>> chmod: cambiando los permisos de «/usr/sbin/slmodemd»: Operación no permitida >>>>>>>>>>>>>> SmartLink Soft Modem: version 2.9.11 Mar 6 2009 08:34:21 >>>>>>>>>>>>>> Version verified: 2.9.11 >>>>>>>>>>>>>> >>>>>>>>>>>>>> With root permission, the typical activation command is: >>>>>>>>>>>>>> for modems hosted on High Definition Audio cards >>>>>>>>>>>>>> slmodemd -c USA --alsa hw:0,6 >>>>>>>>>>>>>> for modems of the AC'97 family >>>>>>>>>>>>>> slmodemd -c USA --alsa modem:1 >>>>>>>>>>>>>> for modems on ALI5451 sound cards >>>>>>>>>>>>>> slmodemd -c USA --alsa hw:0,1 >>>>>>>>>>>>>> for Smartlink chipset PCI card modems: >>>>>>>>>>>>>> slmodemd -c USA /dev/slamr0 >>>>>>>>>>>>>> for Smartlink chipset USB modems >>>>>>>>>>>>>> slmodemd -c USA /dev/slusb0 >>>>>>>>>>>>>> >>>>>>>>>>>>>> If not in the USA, replace USA with a country from the output of: >>>>>>>>>>>>>> slmodemd --countrylist >>>>>>>>>>>>>> For other slmodemd parameters, query with: >>>>>>>>>>>>>> slmodemd --help >>>>>>>>>>>>>> >>>>>>>>>>>>>> Report any problems to discuss@xxxxxxxxxxxxx >>>>>>>>>>>>>> >>>>>>>>> >>>>>>>>>>>>> Aún así, escribí la orden sudo slmodemd -c SPAIN >>>>>>>> --alsa hw:0,6, que dio como salida el siguiente mensaje: >>>>>>>>>>>>>> >>>>>>>>>>>>>> josem@josem-laptop:~/Descargas Web/SLMODEMD.gcc4.3$ sudo slmodemd -c SPAIN >>>>> --alsa hw:0,6 >>>>>>>>>>>>>> [sudo] password for josem: >>>>>>>>>>>>>> error: alsa setup: cannot open playback device 'hw:0,6': Device or resource >>>>> busy >>>>>>>>>>>>>> error: cannot setup device `hw:0,6' >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Ahora que me fijo, los paquetes libasound2* que decía Marv son de >>>>>>>>>>>> la versión de 32 bits de ubuntu (aunque él indicaba los de la versión >>>>>>>>>>>> Hardy, supongo que será igual con la versión Jaunty). Como sabéis, mi >>>>>>>>>>>> sistema es de 64 bits, y Marv comentaba algo acerca de eso. Sé que hai >>>>>>>>>>>> manera de forzar la ejecución de programas en modo de 32 bits en >>>>>>>>>>>> sistemas de 64, ¿pero puede aplicarse igualmente a módulos o servicios? >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Como ya dije en un mensaje anterior, también he descargado el >>>>>>>>>>>> paquete SLMODEMD gcc4.3 alsa1.0.18.tar.gz que me decía Marv, pero no >>>>>>>>>>>> hice nada con él por no saber cómo utilizarlo. ¿Arreglaría el problema >>>>>>>>>>>> usando ese paquete en lugar del que no incluye alsa? ¿Y como debo >>>>>>>>>>>> usarlo? >>>>>>>>>>>>>> >>>>>>>>>>>>>> Tengo mucho que agradeceros, porque, >>>>>>>>>>>> a pesar de mi torpeza con la ventana de terminal (y de Linux en >>>>>>>>>>>> general), siempre voy aprendiendo algo. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Un saludo a todos, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Alfredo >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Date: Wed, 4 Nov 2009 07:17:12 -0600 >>>>>>>>>>>>> >>>>>>>>>>>>>> Subject: Re: 0x10573055 chipset faxing through /dev/pts/N >>>>>>>>>>>> ports? WAS: Alfredo, Spain, kernel 2.6.28-16-generic >>>>>>>>>>>>>>> From: olivares14031@xxxxxxxxx >>>>>>>>>>>>>>> To: marvin.stodolsky@xxxxxxxxx >>>>>>>>>>>>>>> CC: ciornjeja@xxxxxxxxx; provisio@xxxxxxxxxx; discuss@xxxxxxxxxxxxx >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Marv, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Arturo wrote in Italian the following: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Alfredo >>>>>>>>>>>>>>> Le indicazioni di Marvin sono corrette, solo rilevo che negli >>>>>>>>>>>>>>> indirizzi dove prelevare i due file è indicato il nome in codice >>>>>>>>>>>>>>> intrepid che corrisponde alla release 8.10 di Ubuntu mentre tu hai la >>>>>>>>>>>>>>> versione 9.04 che ha nome in codice Jaunty. E molto probabile che le >>>>>>>>>>>>>>> due librerie siano uguali ma per evitare rischi inutili ti consiglio >>>>>>>>>>>>>>> di usare il sistema tradizionale per caricare i pacchetti dai >>>>>>>>>>>>>>> repositori ufficiali di Ubuntu. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Sistema->-Amministrazione->-Gestione pacchetti: Nella finestra che si >>>>>>>>>>>>>>> aprira scrivi nel riquadro sotto "Ricerca veloce" libasound e sotto >>>>>>>>>>>>>>> vedrai formarsi un elenco di voci che contiene le due librerie >>>>>>>>>>>>>>> indicate da Marvin. Clicca col tasto destro nei due quadratini davanti >>>>>>>>>>>>>>> alle due voci e nel menu seleziona "Marca per l'installazione" Poi >>>>>>>>>>>>>>> clicca sul pulsante Applica nella barra dei pulsanti. Naturalmente >>>>>>>>>>>>>>> devi essere collegato in rete per prelevare i due pacchetti dai >>>>>>>>>>>>>>> repositori. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Il file SLMODEMD.gcc4.3.tar.gz contiene il demone slmodemd gia >>>>>>>>>>>>>>> precompilato e quindi indipendente dalla versione del kernel. Questo >>>>>>>>>>>>>>> demone per funzionare a bisogno di un driver di basso livello. ( E >>>>>>>>>>>>>>> spiegato nel file 1st Read.txt) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Il file Modemdata.txt che hai allegato alla tua richiesta dice che per >>>>>>>>>>>>>>> il tuo laptop è indicato l'uso del modulo snd-hda-intel. Per sapere se >>>>>>>>>>>>>>> detto modulo è montato digita lsmod e guarda se c'e nell'elenco. >>>>>>>>>>>>>>> Senza questo modulo il demone slmodemd non pilotera il modem. >>>>>>>>>>>>>>> Se e presente devi scompattare il file SLMODEMD.gcc4.3.tar.gz entrare >>>>>>>>>>>>>>> nella cartella e digitare ./setup Questo installa il demone slmodemd >>>>>>>>>>>>>>> quindi come scritto da Marvin: sudo slmodemd -c SPAIN --alsa hw:0,6 >>>>>>>>>>>>>>> Buon lavoro >>>>>>>>>>>>>>> For Marvin Excuse me if I writed more and wrong. >>>>>>>>>>>>>>> Arturo >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> He is telling Alfredo that your indications are correct and that he >>>>>>>>>>>>>>> should apply them to get the modem working. He is giving direct >>>>>>>>>>>>>>> instructions and to use a software manager in Ubuntu to get the >>>>>>>>>>>>>>> required libasound packages installed. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> After installing the packages read 1stRead.txt and then run >>>>>>>>>>>>>>> $ sudo ./setup >>>>>>>>>>>>>>> from the SLMODEMD.gcc4.3.tar.gz archive after extraction. He also >>>>>>>>>>>>>>> asks to forgive him for writing too much if it was too much. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I don't know much italian, but I can more or less make connections. >>>>>>>>>>>>>>> If my Dad were alive, I would get first class help since he knew much >>>>>>>>>>>>>>> more than just the word "bene" which translates to spanish as "bien" >>>>>>>>>>>>>>> and in english "good". Grazie Arturo. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Saludos/Regards, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On 11/4/09, Marvin Stodolsky wrote: >>>>>>>>>>>>>>>> Antonio, >>>>>>>>>>>>>>>> My Spanish comprehension is far too poor to understand the status >>>>>>>>>>>>>>>> of this problem. >>>>>>>>>>>>>>>> Some more translation would help. >>>>>>>>>>>>>>>> Also contacting the local SPanish Linux group through >>>>>>>>>>>>>>>> http://www.linux.org/groups/spain.html, might be useful. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Tue, Nov 3, 2009 at 4:07 PM, Arturo Neri wrote: >>>>>>>>>>>>>>>>> Alfredo >>>>>>>>>>>>>>>>> Le indicazioni di Marvin sono corrette, solo rilevo che negli >>>>>>>>>>>>>>>>> indirizzi dove prelevare i due file è indicato il nome in codice >>>>>>>>>>>>>>>>> intrepid che corrisponde alla release 8.10 di Ubuntu mentre tu hai la >>>>>>>>>>>>>>>>> versione 9.04 che ha nome in codice Jaunty. E molto probabile che le >>>>>>>>>>>>>>>>> due librerie siano uguali ma per evitare rischi inutili ti consiglio >>>>>>>>>>>>>>>>> di usare il sistema tradizionale per caricare i pacchetti dai >>>>>>>>>>>>>>>>> repositori ufficiali di Ubuntu. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Sistema->-Amministrazione->-Gestione pacchetti: Nella finestra che si >>>>>>>>>>>>>>>>> aprira scrivi nel riquadro sotto "Ricerca veloce" libasound e sotto >>>>>>>>>>>>>>>>> vedrai formarsi un elenco di voci che contiene le due librerie >>>>>>>>>>>>>>>>> indicate da Marvin. Clicca col tasto destro nei due quadratini davanti >>>>>>>>>>>>>>>>> alle due voci e nel menu seleziona "Marca per l'installazione" Poi >>>>>>>>>>>>>>>>> clicca sul pulsante Applica nella barra dei pulsanti. Naturalmente >>>>>>>>>>>>>>>>> devi essere collegato in rete per prelevare i due pacchetti dai >>>>>>>>>>>>>>>>> repositori. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Il file SLMODEMD.gcc4.3.tar.gz contiene il demone slmodemd gia >>>>>>>>>>>>>>>>> precompilato e quindi indipendente dalla versione del kernel. Questo >>>>>>>>>>>>>>>>> demone per funzionare a bisogno di un driver di basso livello. ( E >>>>>>>>>>>>>>>>> spiegato nel file 1st Read.txt) >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Il file Modemdata.txt che hai allegato alla tua richiesta dice che per >>>>>>>>>>>>>>>>> il tuo laptop è indicato l'uso del modulo snd-hda-intel. Per sapere se >>>>>>>>>>>>>>>>> detto modulo è montato digita lsmod e guarda se c'e nell'elenco. >>>>>>>>>>>>>>>>> Senza questo modulo il demone slmodemd non pilotera il modem. >>>>>>>>>>>>>>>>> Se e presente devi scompattare il file SLMODEMD.gcc4.3.tar.gz entrare >>>>>>>>>>>>>>>>> nella cartella e digitare ./setup Questo installa il demone slmodemd >>>>>>>>>>>>>>>>> quindi come scritto da Marvin: sudo slmodemd -c SPAIN --alsa hw:0,6 >>>>>>>>>>>>>>>>> Buon lavoro >>>>>>>>>>>>>>>>> For Marvin Excuse me if I writed more and wrong. >>>>>>>>>>>>>>>>> Arturo >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> 2009/11/3 Marvin Stodolsky : >>>>>>>>>>>>>>>>>> After down load from >>>>>>>>>>>>>>>>>> http://packages.ubuntu.com/intrepid/i386/libasound2/download >>>>>>>>>>>>>>>>>> http://packages.ubuntu.com/intrepid/i386/libasound2-dev/download >>>>>>>>>>>>>>>>>> both packages can be installed with: >>>>>>>>>>>>>>>>>> $ sudo dpkg -i libasound*.deb >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thereafter, there should be success with: >>>>>>>>>>>>>>>>>> $ sudo slmodemd -c SPAIN --alsa hw:0,6 >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Tue, Nov 3, 2009 at 10:37 AM, Alfredo M.H. >>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Estimado Marv. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Gracias una vez más por tu respuesta. He comprobado si tenía instalados >>>>>>>>>>>>>>>>>>> los paquetes libasound2* y me faltaba sólo el libasound2-dev. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Como veo que tú entiendes mucho mejor el español que yo el inglés, >>>>>>>>>>>>>>>>>>> ¿podrías explicarme los pasos que tengo que seguir para instalar o >>>>>>>>>>>>>>>>>>> compilar los drivers para poder usar el modem (como modem o como fax) >>>>> en >>>>>>>>>>>>>>>>>>> base a los datos acerca de mi PC que facilité en mi primer mensaje, >>>>> por >>>>>>>>>>>>>>>>>>> favor?. Descargué el paquete gcc4.3 alsa1.0.18.tar.gz pero no hice nada >>>>>>>>>>>>>>>>>>> porque, como ya dije, cada archivo contenido en él dice muchas cosas >>>>> y >>>>>>>>>>>>>>>>>>> mi nivel de inglés no llega tan alto. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Un saludo, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Alfredo >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Date: Tue, 3 Nov 2009 08:30:53 -0500 >>>>>>>>>>>>>>>>>>>> Subject: Re: FW: 0x10573055 chipset faxing through /dev/pts/N ports? >>>>>>>>>>>>>>>>>>>> WAS: Alfredo, Spain, kernel 2.6.28-16-generic >>>>>>>>>>>>>>>>>>>> From: marvin.stodolsky@xxxxxxxxx >>>>>>>>>>>>>>>>>>>> To: provisio@xxxxxxxxxx >>>>>>>>>>>>>>>>>>>> CC: ciornjeja@xxxxxxxxx; discuss@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Alfredo >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> x86 64 motherboards are supported. >>>>>>>>>>>>>>>>>>>> However there must be installed some 32 bit libraries to support the >>>>>>>>>>>>>>>>>>>> 32 bit compiled slmodemd. >>>>>>>>>>>>>>>>>>>> Only a 32 bit slmodemd is available, because its code package has a >>>>>>>>>>>>>>>>>>>> pre-compiled 32 component, as provided orginially by Smartlink. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> The needed libraries to complement slmodemd are the 32 bit versions >>>>> of >>>>>>>>>>>>>>>>>>>> libasound2 and libasound2-dev. >>>>>>>>>>>>>>>>>>>> If not already installed on your System by default, they can be >>>>>>>>>>>>>>>>>>>> searched for at http://packages.ubuntu.com >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Tue, Nov 3, 2009 at 7:23 AM, Alfredo M.H. wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hola de nuevo, Arturo. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Te escribo para decirte que no he instalado la versión de 32 bits >>>>>>>>>>>>>>>>>>> de Ubuntu. Todavía estoy estudiando si actualizarme a la versión 9.10, >>>>>>>>>>>>>>>>>>> pero, si lo hago, probablemente instale la versión de 64 bits otra vez >>>>>>>>>>>>>>>>>>> porque, como ya dije en otra ocasión, tengo otro portátil con Windows >>>>>>>>>>>>>>>>>>> XP y puedo usarlo para enviar fax mientras no sea más fácil hacerlo >>>>> con >>>>>>>>>>>>>>>>>>> Ubuntu. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> De todas maneras, muchas gracias por >>>>>>>>>>>>>>>>>>> tu ayuda y perdona por el problema del texto del mensaje. La verdad es >>>>>>>>>>>>>>>>>>> que ya tengo seleccionado texto plano, pero no sé por qué, muchas veces >>>>>>>>>>>>>>>>>>> no funciona y tengo que re-enviarlo para que se pueda leer. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Un saludo, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Alfredo >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Date: Tue=2C 3 Nov 2009 09:02:18 +0100 >>>>>>>>>>>>>>>>>>>>>>> Subject: Re: 0x10573055 chipset faxing through /dev/pts/N ports? >>>>>>>>>>>>>>>>>>>>>>> WAS: Alf= >>>>>>>>>>>>>>>>>>>>>> redo=2C Spain=2C kernel 2.6.28-16-generic >>>>>>>>>>>>>>>>>>>>>>> From: ciornjeja@xxxxxxxxx >>>>>>>>>>>>>>>>>>>>>>> To: provisio@xxxxxxxxxx >>>>>>>>>>>>>>>>>>>>>>> CC: olivares14031@xxxxxxxxx=3B marvin.stodolsky@xxxxxxxxx=3B >>>>>>>>>>>>>>>>>>>>>>> discuss@linm= >>>>>>>>>>>>>>>>>>>>>> odems.org >>>>>>>>>>>>>>>>>>>>>>>=20 >>>>>>>>>>>>>>>>>>>>>>> Ciao Alfredo >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> prima di tutto >>>>>>>> devo chiederti se hai cambiato la versione di Ubuntu. >>>>>>>>>>>>>>>>>>>>>>> Antonio ti ha scritto che nel file ModemData.txt si precisa che il >>>>>>>>>>>>>>>>>>>>>>> tuo >>>>>>>>>>>>>>>>>>>>>>> sistema scansionato era a 64 bits mentre il driver contenuto nel >>>>>>>>>>>>>>>>>>>>>>> file >>>>>>>>>>>>>>>>>>>>>>> SLMODEMD gcc4.3 alsa1.0.18.tar.gz funziona SOLO su sistemi a 32 >>>>>>>>>>>>>>>>>>>>>>> bits. >>>>>>>>>>>>>>>>>>>>>>>=20 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Se lo hai >>>>>>>> fatto=2C devi dirmi se hai eseguito la procedura indicata >>>>>>>>>>>>>>>>>>>>>>> da >>>>>>>>>>>>>>>>>>>>>>> Antonio per installare o meglio dire compilare il driver. >>>>>>>>>>>>>>>>>>>>>>>=20 >>>>>>>>>>>>>>>>>>>>>>> Nota a parte ti chiedo se puoi di rispondermi in testo piano e non >>>>>>>>>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>>>>>>>>> html perch=E8 le lettere accentate della lingua spagnola mi >>>>>>>>>>>>>>>>>>>>>>> impediscono >>>>>>>>>>>>>>>>>>>>>>> di leggere bene le tue risposte. Grazie >>>>>>>>>>>>>>>>>>>>>>>=20 >>>>>>>>>>>>>>>>>>>>>>>=20 >>>>>>>>>>>>>>>>>>>>>>> 2009/11/2 Alfredo M.H. : >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Hola=2C Arturo. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Antes de >>>>>>>> nada=2C muchas gracias por tu respuesta. Me ha sido mucho >>>>>>>>>>>>>>>>>>>>>>>> m=E1s= >>>>>>>>>>>>>>>>>>>>>> f=E1cil comprenderla debido a la ra=EDz com=FAn de nuestros idiomas. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Conozco el >>>>>>>> programa efax-gtk=2C de hecho lo tengo instalado=2C pero >>>>>>>>>>>>>>>>>>>>>>>> me d= >>>>>>>>>>>>>>>>>>>>>> a error a la hora de acceder al modem=2C de ah=ED la raz=F3n de mi >>>>>>>>>>>>>>>>>>>>>> consulta= >>>>>>>>>>>>>>>>>>>>>> . Supongo que ser=E1 por lo que me comenta Marv de las funciones de >>>>>>>>>>>>>>>>>>>>>> audio q= >>>>>>>>>>>>>>>>>>>>>> ue son necesarias para el fax. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> =BFPodr=EDas decirme c=F3mo hiciste t=FA para conseguirlo? >>>>>>>>>>>>>>>>>>>>>>>> =BFTambi=E9n = >>>>>>>>>>>>>>>>>>>>>> tuviste que instalar o compilar los m=F3dulos que me comentaron? >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Un abrazo=2C y muchas gracias por tu ayuda=2C >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= >>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>> =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= >>>>>>>>>>>>>>>>>>>>>> =A0=A0=A0 Alfredo >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Date: Mon=3D2C 2 Nov 2009 17:38:45 +0100 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> Subject: Re: FW: 0x10573055 chipset faxing through /dev/pts/N >>>>>>>>>>>>>>>>>>>>>>>>>> ports? W= >>>>>>>>>>>>>>>>>>>>>> AS:=3D >>>>>>>>>>>>>>>>>>>>>>>>> Alfredo=3D2C Spain=3D2C kernel 2.6.28-16-generic >>>>>>>>>>>>>>>>>>>>>>>>>> From: ciornjeja@xxxxxxxxx >>>>>>>>>>>>>>>>>>>>>>>>>> To: provisio@xxxxxxxxxx >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> CC: >>>>>>>>>> olivares14031@xxxxxxxxx=3D3B marvin.stodolsky@xxxxxxxxx=3D3B >>>>>>>>>>>>>>>>>>>>>>>>>> discu= >>>>>>>>>>>>>>>>>>>>>> ss@linm=3D >>>>>>>>>>>>>>>>>>>>>>>>> odems.org >>>>>>>>>>>>>>>>>>>>>>>>>>=3D20 >>>>>>>>>>>>>>>>>>>>>>>>>> Alfredo >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> non conosco lo spagnolo e spero che tu capisca l'italiano. >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Con Ubuntu >>>>>>>>>> 9.04 =3DE8 possibile spedire fax usando il programma >>>>>>>>>>>>>>>>>>>>>>>>>> Efax-g= >>>>>>>>>>>>>>>>>>>>>> tk >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> che si trova nei repositori di Ubuntu. La procedura =3DE8 >>>>>>>>>>>>>>>>>>>>>>>>>> semplice=3D2= >>>>>>>>>>>>>>>>>>>>>> C >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> bisogna >>>>>>>>>> preparare il documento in formato PDF o postscript=3D2C >>>>>>>>>>>>>>>>>>>>>>>>>> ma io = >>>>>>>>>>>>>>>>>>>>>> non >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> so >>>>>>>> spiegarlo in spagnolo. Ma prima di tutto devi installare il >>>>>>>>>>>>>>>>>>>>>>>>>> modulo >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> che pilota il modem come indicato dallo scanmodem e scritto da >>>>>>>>>>>>>>>>>>>>>>>>>> Antonio. Io spedisco e ricevo fax con Ubuntu. >>>>>>>>>>>>>>>>>>>>>>>>>>=3D20 >>>>>>>>>>>>>>>>>>>>>>>>>> 2009/11/2 Alfredo M.H. : >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Marv=3D2C Antonio. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3DA0De nuevo=3D2C much=3DEDsimas gracias por vuestras >>>>>>>>>>>>>>>>>>>>>>>>>>> r=3DE1pidas y = >>>>>>>>>>>>>>>>>>>>>> =3DFAtiles re=3D >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> spuestas. A ti=3D2C Antonio=3D2C gracias adem=3DE1s por hacer de >>>>>>>>>>>>>>>>>>>>>>>>> int=3D= >>>>>>>>>>>>>>>>>>>>>> E9rprete=3D2C =3D >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> porque=3D2C como ya os dije=3D2C mi nivel de ingl=3DE9s deja >>>>>>>>>>>>>>>>>>>>>>>>> much=3DEDs= >>>>>>>>>>>>>>>>>>>>>> imo que dese=3D >>>>>>>>>>>>>>>>>>>>>>>>> ar. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3DA0En fin=3D2C viendo que va a ser imposible (o muuuuy >>>>>>>>>>>>>>>>>>>>>>>>>>> dif=3DEDcil = >>>>>>>>>>>>>>>>>>>>>> para m=3DED=3D >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> ) usar >>>>>>>> este modem como fax=3D2C tendr=3DE9 que seguir usando el de >>>>>>>>>>>>>>>>>>>>>>>>> otro= >>>>>>>>>>>>>>>>>>>>>> port=3DE1=3D >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> til >>>>>>>> con Win XP (el m=3DEDo=3D2C que tiene una partici=3D3DF3n con >>>>>>>>>>>>>>>>>>>>>>>>> Vista= >>>>>>>>>>>>>>>>>>>>>> que apena=3D >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> s uso >>>>>>>> por lo malo que es ese sistema operativo=3D2C no tiene >>>>>>>>>>>>>>>>>>>>>>>>> servicios = >>>>>>>>>>>>>>>>>>>>>> para e=3D >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> nviar >>>>>>>> fax y tampoco tengo ning=3D3DFAn programa comercial para >>>>>>>>>>>>>>>>>>>>>>>>> hacerlo)= >>>>>>>>>>>>>>>>>>>>>> . De m=3D >>>>>>>>>>>>>>>>>>>>>>>>> omento=3D2C estoy bastante contento con Ubuntu 9.04=3D2C >>>>>>>>>>>>>>>>>>>>>>>>> aunque=3D2C vi= >>>>>>>>>>>>>>>>>>>>>> niendo del=3D >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> mundo >>>>>>>> Windows=3D2C se echa en falta un poco m=3DE1s de facilidad >>>>>>>>>>>>>>>>>>>>>>>>> en alg= >>>>>>>>>>>>>>>>>>>>>> unas cu=3D >>>>>>>>>>>>>>>>>>>>>>>>> estiones y alguna que otra funcionalidad en los programas >>>>>>>>>>>>>>>>>>>>>>>>> habituales=3D= >>>>>>>>>>>>>>>>>>>>>> 2C per=3D >>>>>>>>>>>>>>>>>>>>>>>>> o bueno=3D2C todo es ir investigando y aprendiendo. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> =3DA0Un saludo y muchas gracias >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA= >>>>>>>>>>>>>>>>>>>>>> 0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3D >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0= >>>>>>>>>>>>>>>>>>>>>> =3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0 Al=3D >>>>>>>>>>>>>>>>>>>>>>>>> fredo >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Marv >>>>>>>>>>>> dice que el modem no se usa generalmente para hacer FAX >>>>>>>>>>>>>>>>>>>>>>>>>>>>> aunque= >>>>>>>>>>>>>>>>>>>>>> el >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> archivo SLMODEMD esta competente para hacer FAX. El problema >>>>>>>>>>>>>>>>>>>>>>>>>>>>> es que >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> el modem usa un port verdadero /dev/pts/N con N siendo un >>>>>>>>>>>>>>>>>>>>>>>>>>>>> numero y = >>>>>>>>>>>>>>>>>>>>>> no >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> tienen la capacidad para sonido que se requiere para FAX. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>=3D3D20 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3= >>>>>>>>>>>>>>>>>>>>>> D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D= >>>>>>>>>>>>>>>>>>>>>> =3D3D >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D= >>>>>>>>>>>>>>>>>>>>>> 3D=3D3D3D=3D3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>>>=3D3D20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alfredo >>>>>>>>>>>>>>>>>>>>>>>>>>>>>=3D3D20 >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> Re: solo quiero usar el modem para enviar faxes de manera >>>>>>>>>>>>>>>>>>>>>>>>>>>>> ocasional= >>>>>>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Concerning FAX=3D3D2C this can likely not be supported under >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Linux= >>>>>>>>>>>>>>>>>>>>>> =3D3D2C =3D >>>>>>>>>>>>>>>>>>>>>>>>> though >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> the slmodemd utility is itself FAX competent. >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> The >>>>>>>>>>>> problem is that the modem uses the a true port /dev/pts/N >>>>>>>>>>>>>>>>>>>>>>>>>>>>> (some= >>>>>>>>>>>>>>>>>>>>>> nu=3D >>>>>>>>>>>>>>>>>>>>>>>>> m=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> ber) >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Such >>>>>>>>>>>> /dev/pts/ ports do not yet have the capability for the >>>>>>>>>>>>>>>>>>>>>>>>>>>>> SOUND >>>>>>>>>>>>>>>>>>>>>>>>>>>>> support needed for fax. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>=3D3D20 >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> List >>>>>>>>>>>> if someone else has another experience concerning Faxing >>>>>>>>>>>>>>>>>>>>>>>>>>>>> throu= >>>>>>>>>>>>>>>>>>>>>> gh >>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/pts/ ports=3D3D2C please advise. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>=3D3D20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Saludos=3D3D2C >>>>>>>>>>>>>>>>>>>>>>>>>>>>>=3D3D20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>>>>>>>>>>>>>>>>=3D3D20 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> On 11/2/09=3D3D2C Marvin Stodolsky =3DA0wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alfredo >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Re: solo quiero usar el modem para enviar faxes de manera >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ocasiona= >>>>>>>>>>>>>>>>>>>>>> l. >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Concerning FAX=3D3D2C this can likely not be supported under >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Linux= >>>>>>>>>>>>>>>>>>>>>> =3D3D2C=3D >>>>>>>>>>>>>>>>>>>>>>>>> though >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> the slmodemd utility is itself FAX competent. >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> The problem is that the modem uses the a true port /dev/pts/N >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (som= >>>>>>>>>>>>>>>>>>>>>> e n=3D >>>>>>>>>>>>>>>>>>>>>>>>> um=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> ber) >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Such /dev/pts/ ports do not yet have the capability for the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SOUND >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> support needed for fax. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> List if someone else has another experience concerning Faxing >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thro= >>>>>>>>>>>>>>>>>>>>>> ugh >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/pts/ ports=3D3D2C please advise. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On >>>>>>>>>>>> Mon=3D3D2C Nov 2=3D3D2C 2009 at 7:16 AM=3D3D2C Alfredo >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> M.H. =3D= >>>>>>>>>>>>>>>>>>>>>> 3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Gracias a todos por vuestras respuestas=3D3D2C y perdonad >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nuevame= >>>>>>>>>>>>>>>>>>>>>> nte p=3D >>>>>>>>>>>>>>>>>>>>>>>>> or mi=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> baja >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> comprensi=3D3DF3n del ingl=3D3DE9s. He bajado la >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> versi=3D3DF3n de= >>>>>>>>>>>>>>>>>>>>>> SLMODEMD=3D >>>>>>>>>>>>>>>>>>>>>>>>> que me r=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> ecomienda >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> MarvS=3D3D2C pero ahora me encuentro con el mismo >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problema=3D3D2C= >>>>>>>>>>>>>>>>>>>>>> porque=3D >>>>>>>>>>>>>>>>>>>>>>>>> est=3D3DE1=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> repleto >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> de >>>>>>>>>>>>>> archivos en ingl=3D3DE9s y cada cual dice sus cosas y no >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> s=3D3= >>>>>>>>>>>>>>>>>>>>>> DE9 a q=3D >>>>>>>>>>>>>>>>>>>>>>>>> u=3D3DE9 at=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> enerme. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Si alguien fuera tan amable de explic=3D3DE1rmelo en >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> espa=3D3DF1o= >>>>>>>>>>>>>>>>>>>>>> l y de =3D >>>>>>>>>>>>>>>>>>>>>>>>> manera >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> comprensible me ser=3D3DEDa de gran ayuda. Como dije en mi >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> primer= >>>>>>>>>>>>>>>>>>>>>> mens=3D >>>>>>>>>>>>>>>>>>>>>>>>> aje=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3D2C solo >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> quiero >>>>>>>>>>>>>> usar el modem para enviar faxes de manera ocasional. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Bueno=3D3D2C repito=3D3D2C muchas gracias a todos y >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> disculpad mi = >>>>>>>>>>>>>>>>>>>>>> torpeza=3D >>>>>>>>>>>>>>>>>>>>>>>>> (soy n=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> uevo en >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> el mundo Linux y se nota) y mi poco nivel de ingl=3D3DE9s. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Un sal= >>>>>>>>>>>>>>>>>>>>>> udo=3D >>>>>>>>>>>>>>>>>>>>>>>>> =3D3D2C >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alfredo >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> Date: Sun=3D3D2C 1 Nov 2009 18:36:52 -0500 >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Subject: Re: Alfredo=3D3D2C Spain=3D3D2C kernel >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2.6.28-16-generi= >>>>>>>>>>>>>>>>>>>>>> c >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> From: marvin.stodolsky@xxxxxxxxx >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To: olivares14031@xxxxxxxxx >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> CC: provisio@xxxxxxxxxx=3D3D3B discuss@xxxxxxxxxxxxx >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alfredo=3D3D2C >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Use the =3D3DA0SLMODEMD gcc4.3 alsa1.0.18.tar.gz >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to match the ALSA version. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'll fix the bug in scanModem >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanModem maintainer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On >>>>>>>>>>>>>> Sun=3D3D2C Nov 1=3D3D2C 2009 at 3:08 PM=3D3D2C Antonio >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Olivar= >>>>>>>>>>>>>>>>>>>>>> es >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3DA0wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alfredo=3D3D2C >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> scanModem recommends that you get SLMODEMD.gcc4.3.tar.gz >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> Predictive =3D3DA0diagnostics for card in bus 00:0f.0: >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0 =3D3DA0 Modem chipset =3D3DA0detected on >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0NAME=3D3D3D"Audio device: Silicon Integrated >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Systems [Si= >>>>>>>>>>>>>>>>>>>>>> S] Azal=3D >>>>>>>>>>>>>>>>>>>>>>>>> ia Audi=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> o >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Controller" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0CLASS=3D3D3D0403 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0PCIDEV=3D3D3D1039:7502 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0SUBSYS=3D3D3D1043:1783 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0IRQ=3D3D3D18 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0HDA=3D3D3D1039:7502 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0SOFT=3D3D3D1039:7502.HDA >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0HDAchipVendorID=3D3D3D1057 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0CHIP=3D3D3D0x10573055 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0IDENT=3D3D3Dslmodemd >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3D3DA0SLMODEMD DEVICE=3D3D3Dhw:0=3D3D2C6 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0Driver=3D3D3Dsnd-hda-intel >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0For candidate modem in: =3D3DA000:0f.0 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0 =3D3DA00403 Audio device: Silicon Integrated >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Systems [S= >>>>>>>>>>>>>>>>>>>>>> iS] Aza=3D >>>>>>>>>>>>>>>>>>>>>>>>> lia Aud=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> io >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Controller >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0 Primary device ID: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA01039:7502 >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0 =3D3DA0 Subsystem PCI id =3D3DA01043:1783 >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0 =3D3DA0 Softmodem codec or chipset from >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> diagnostics: 0x= >>>>>>>>>>>>>>>>>>>>>> 1057305=3D >>>>>>>>>>>>>>>>>>>>>>>>> 5 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0= >>>>>>>>>>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0 =3D >>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0from =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0 =3D3DA0Archives: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0= >>>>>>>>>>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0 =3D >>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0 The HDA card softmode=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> m chip is 0x10573055 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0Support type needed or chipset: =3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0slmodemd = >>>>>>>>>>>>>>>>>>>>>> supportin=3D >>>>>>>>>>>>>>>>>>>>>>>>> g the >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> snd-hda-intel audio+modem driver >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0An ALSA (Advanced Linux Sound Architecture) modem >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> driver= >>>>>>>>>>>>>>>>>>>>>> : >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0snd-hda-intel >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0provides Low Level support enabling contact with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the mod= >>>>>>>>>>>>>>>>>>>>>> em ha=3D >>>>>>>>>>>>>>>>>>>>>>>>> rdwar=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> e. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0For all BUT Conexant chip soft modems (using >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> hsfmodem so= >>>>>>>>>>>>>>>>>>>>>> ftwar=3D >>>>>>>>>>>>>>>>>>>>>>>>> e) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0complementary High Level support is through a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Smartlink = >>>>>>>>>>>>>>>>>>>>>> utili=3D >>>>>>>>>>>>>>>>>>>>>>>>> ty: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0slmodemd >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0Download from >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> http://linmodems.technion.ac.il/packages/s= >>>>>>>>>>>>>>>>>>>>>> martl=3D >>>>>>>>>>>>>>>>>>>>>>>>> ink/ >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0the package SLMODEMD.gcc4.3.tar.gz having a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> compiled slm= >>>>>>>>>>>>>>>>>>>>>> odemd=3D >>>>>>>>>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Unpack under Linux with: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0$ tar zxf SLMODEMD.gcc4.3.tar.gz >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0and read instructions therein. But briefly=3D3D2C >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the mo= >>>>>>>>>>>>>>>>>>>>>> dem is =3D >>>>>>>>>>>>>>>>>>>>>>>>> setup w=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> ith >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> command: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0sudo slmodemd -c YOUR COUNTRY >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --alsa hw:= >>>>>>>>>>>>>>>>>>>>>> 0=3D3D2C6 >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0reporting dynamic creation of ports: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0 =3D3DA0 /dev/ttySL0 --> /dev/pts/N =3D3DA0 =3D3D2C >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with= >>>>>>>>>>>>>>>>>>>>>> N some num=3D >>>>>>>>>>>>>>>>>>>>>>>>> ber >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0Read DOCs/Smartlink.txt and >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> Modem/DOCs/YourSystem.txt fo= >>>>>>>>>>>>>>>>>>>>>> r fol=3D >>>>>>>>>>>>>>>>>>>>>>>>> low >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> through guidance. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> One problem is the Modem Interrupt Assignment=3D3D2C and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wvdial= >>>>>>>>>>>>>>>>>>>>>> is n=3D >>>>>>>>>>>>>>>>>>>>>>>>> ot >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installed: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> For candidate card in slot 00:0f.0=3D3D2C firmware >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> information = >>>>>>>>>>>>>>>>>>>>>> and b=3D >>>>>>>>>>>>>>>>>>>>>>>>> ootup >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> diagnostics are: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0PCI slot =3D3DA0 =3D3DA0PCI ID =3D3DA0 =3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0 = >>>>>>>>>>>>>>>>>>>>>> =3D3DA0SubsystemID=3D >>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0 =3D3DA0Name >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0---------- =3D3DA0 =3D3DA0--------- =3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0-----= >>>>>>>>>>>>>>>>>>>>>> ---- =3D3DA0 =3D >>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0-------------- >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA000:0f.0 =3D3DA0 =3D3DA01039:7502 =3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA01043:178= >>>>>>>>>>>>>>>>>>>>>> 3 =3D3DA0 =3D3DA0=3D >>>>>>>>>>>>>>>>>>>>>>>>> Audio device: Sil=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> icon >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Integrated Systems [SiS] Azalia Audio Controller >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0Modem interrupt assignment and sharing: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA018: =3D3DA0 =3D3DA0 =3D3DA018017 =3D3DA0 =3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0= >>>>>>>>>>>>>>>>>>>>>> =3D3DA0384 =3D3DA0 I=3D >>>>>>>>>>>>>>>>>>>>>>>>> O-APIC-fasteoi =3D3DA0 HD=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> A Intel >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0--- Bootup diagnostics for card in PCI slot 00:0f.0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---- >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0[ =3D3DA0 =3D3DA00.521688] pci 0000:00:0f.0: reg 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 32bi= >>>>>>>>>>>>>>>>>>>>>> t mmio: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [0xfddf8000-0xfddfbfff] >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0[ =3D3DA0 =3D3DA00.521724] pci 0000:00:0f.0: PME# >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> suppor= >>>>>>>>>>>>>>>>>>>>>> ted from =3D >>>>>>>>>>>>>>>>>>>>>>>>> D0 D3hot =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> D3cold >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0[ =3D3DA0 =3D3DA00.521728] pci 0000:00:0f.0: PME# >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> disabl= >>>>>>>>>>>>>>>>>>>>>> ed >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0[ =3D3DA0 11.242765] HDA Intel 0000:00:0f.0: PCI >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> INT A -= >>>>>>>>>>>>>>>>>>>>>>> GSI 1=3D >>>>>>>>>>>>>>>>>>>>>>>>> 8 (leve=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> l=3D3D2C >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> low) -> IRQ 18 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0[ =3D3DA0 11.242865] HDA Intel 0000:00:0f.0: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> setting lat= >>>>>>>>>>>>>>>>>>>>>> ency ti=3D >>>>>>>>>>>>>>>>>>>>>>>>> mer to =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> 64 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0The PCI slot 00:0f.0 of the modem card may be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> disabled e= >>>>>>>>>>>>>>>>>>>>>> arly =3D >>>>>>>>>>>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0a bootup process=3D3D2C =3D3DA0but then enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> later. I= >>>>>>>>>>>>>>>>>>>>>> f modem d=3D >>>>>>>>>>>>>>>>>>>>>>>>> rivers lo=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> ad >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0but the =3D3DA0modem is not responsive=3D3D2C read >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DOCs/= >>>>>>>>>>>>>>>>>>>>>> Bootup.tx=3D >>>>>>>>>>>>>>>>>>>>>>>>> t about p=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> ossible >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> fixes. >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0Send dmesg.txt along with ModemData.txt to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> discuss@linmo= >>>>>>>>>>>>>>>>>>>>>> dems.=3D >>>>>>>>>>>>>>>>>>>>>>>>> org >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0if help is needed. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> The dialer utility package WVDIAL does not appear to be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install= >>>>>>>>>>>>>>>>>>>>>> ed =3D >>>>>>>>>>>>>>>>>>>>>>>>> on >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your System. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0For Ubuntu Jaunty users=3D3D2C there are at the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> bottom o= >>>>>>>>>>>>>>>>>>>>>> f >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> http://linmodems.technion.ac.il/packages/: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0wvdial jaunty amd64.zip =3D3DA0 for >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> x86 = >>>>>>>>>>>>>>>>>>>>>> 64=3D3D2C 64 =3D >>>>>>>>>>>>>>>>>>>>>>>>> bit bus syste=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> ms. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0wvdial jaunty i386.zip =3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0fo= >>>>>>>>>>>>>>>>>>>>>> r 32 bit syst=3D >>>>>>>>>>>>>>>>>>>>>>>>> ems. >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0These are about 1 MB in size. =3D3DA0After >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> downloaded an= >>>>>>>>>>>>>>>>>>>>>> d copie=3D >>>>>>>>>>>>>>>>>>>>>>>>> d into =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Linux partition: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0$ unzip wv*.zip >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0Within the new folder: >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0$ sudo dpkg -i *.deb >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0will =3D3DA0complete the wvdial installation >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0Please read Modem/DOCs/wvdial.txt for usage >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> information. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> There is however=3D3D2C a problem=3D3D2C since your system >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is x= >>>>>>>>>>>>>>>>>>>>>> 86 64 b=3D >>>>>>>>>>>>>>>>>>>>>>>>> it and >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> SLMODEMD only works in 32 bit. If you reinstall >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ubuntu=3D3D2C t= >>>>>>>>>>>>>>>>>>>>>> ry >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> reinstalling 32 bit to make the modem functional. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alfredo=3D3D2C >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> scanModem recommienda SLMODEMD.gcc.4.3.tar.gz=3D3D2C pero >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tu si= >>>>>>>>>>>>>>>>>>>>>> stema=3D >>>>>>>>>>>>>>>>>>>>>>>>> es 6=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> 4 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> bits y SLMODEMD es solamente para 32 bits. =3D3DA0El modem >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> si p= >>>>>>>>>>>>>>>>>>>>>> uede >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> funcionar pero solo en 32 bits. =3D3DA0Tambien no tienes >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> el arc= >>>>>>>>>>>>>>>>>>>>>> hivo =3D >>>>>>>>>>>>>>>>>>>>>>>>> WVDIA=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> L >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> installado. =3D3DA0Si reinstalas Ubuntu=3D3D2C instala la >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> versi= >>>>>>>>>>>>>>>>>>>>>> on de 3=3D >>>>>>>>>>>>>>>>>>>>>>>>> 2 bits =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> para >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> poder usar el modem. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Saludos=3D3D2C >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> On 11/1/09=3D3D2C Alfredo M.H. =3DA0wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> Hello=3D3D2C everybody. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Before I pass to expose my problem=3D3D2C I'd >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> like apologize for my level of English. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> I have an Asus notebook with this >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> features: Intel Core 2 Duo CPU (T5800)=3D3D2C 4 Gb. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> RAM=3D3D2C= >>>>>>>>>>>>>>>>>>>>>> 15.4=3D >>>>>>>>>>>>>>>>>>>>>>>>> =3D3D94 WXGA=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3D2C 320 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> Gb. HDD=3D3D2C DVD Sup. MTI=3D3D2C Graphic Card ATI >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Mobility R= >>>>>>>>>>>>>>>>>>>>>> adeon H=3D >>>>>>>>>>>>>>>>>>>>>>>>> D 3470 =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> (VRAM >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> 256 Mb.)=3D3D2C 802.11 b/g (Atheros AR928X) and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -according to = >>>>>>>>>>>>>>>>>>>>>> Vista=3D >>>>>>>>>>>>>>>>>>>>>>>>> - a >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> Motorola SM56 Speakerphone modem/fax. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> I use Ubuntu 9.04=3D3D2C and I'd like to use >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> the modem to send faxes=3D3D2C but it seems that Ubuntu >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> don't = >>>>>>>>>>>>>>>>>>>>>> detec=3D >>>>>>>>>>>>>>>>>>>>>>>>> t it.=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> I >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> ran the scanModem tool but=3D3D2C due to my bad English >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> unders= >>>>>>>>>>>>>>>>>>>>>> tandi=3D >>>>>>>>>>>>>>>>>>>>>>>>> ng=3D3D2C=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> don't know what to do. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> I'd like someone help me (if possible=3D3D2C >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> in Spanish=3D3D2C please) to I can using the modem-fax. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Here a= >>>>>>>>>>>>>>>>>>>>>> re th=3D >>>>>>>>>>>>>>>>>>>>>>>>> e >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> content of ModemData.txt: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0Only plain text email is forwarded by the=3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Discus= >>>>>>>>>>>>>>>>>>>>>> s@Linmo=3D >>>>>>>>>>>>>>>>>>>>>>>>> dems.or=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> g List >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Server=3D3D2C >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0as HTML can contain viruses. Use as the email >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject L= >>>>>>>>>>>>>>>>>>>>>> ine: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>>>>>>>>>>>>>>>>>>>> 0=3D3DA0 YourName=3D3D2C =3D >>>>>>>>>>>>>>>>>>>>>>>>> YourCountry=3D3DA0 kernel 2.6=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> .28-16-generic >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0With this Subject Line cogent experts will be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> alerted= >>>>>>>>>>>>>>>>>>>>>> =3D3D2C a=3D >>>>>>>>>>>>>>>>>>>>>>>>> nd usef=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> ul case >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> names left in the Archive. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0YourCountry will enable Country specific guidance. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Linu= >>>>>>>>>>>>>>>>>>>>>> x exp=3D >>>>>>>>>>>>>>>>>>>>>>>>> erts =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> YourCountry >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0can be found through: >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> http://www.linux.org/groups/index= >>>>>>>>>>>>>>>>>>>>>> .html=3D >>>>>>>>>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> They will know your Country's modem code=3D3D2C which may >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> be e= >>>>>>>>>>>>>>>>>>>>>> ssent=3D >>>>>>>>>>>>>>>>>>>>>>>>> ial f=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> or >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> dialup >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> service. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> blocked by = >>>>>>>>>>>>>>>>>>>>>> an >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Internet >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Provider mail filters. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0So in a day=3D3D2C also check the Archived >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> responses at >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> http://www.linmodems.org >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> --------------------------=3D3DA0 System information >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> ---------------------------- >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> CPU=3D3D3Dx86 64=3D3D2C >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> Linux version 2.6.28-16-generic (buildd@crested) (gcc >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version = >>>>>>>>>>>>>>>>>>>>>> 4.3=3D >>>>>>>>>>>>>>>>>>>>>>>>> .3 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (Ubuntu >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> 4.3.3-5ubuntu4) ) #55-Ubuntu SMP Tue Oct 20 19:48:32 UTC >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2009 >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0scanModem update of:=3D3DA0 2009 09 15 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> The modem symbolic link is /dev/modem -> ttySL0 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> The slmodemd set symbolic link is /dev/ttySL0 -> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/pts/0 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> The dialer utility package WVDIAL does not appear to be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> instal= >>>>>>>>>>>>>>>>>>>>>> led=3D >>>>>>>>>>>>>>>>>>>>>>>>> on >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> System. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> For Ubuntu Jaunty users=3D3D2C there are at the bottom of >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> http://linmodems.technion.ac.il/packages/: >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> wvdial jaunty amd64.zip=3D3DA0=3D= >>>>>>>>>>>>>>>>>>>>>> 3DA0 for x86 64=3D >>>>>>>>>>>>>>>>>>>>>>>>> =3D3D2C 64 bit bus =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> systems. >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> wvdial jaunty i386.zip=3D3DA0=3D3= >>>>>>>>>>>>>>>>>>>>>> DA0=3D3DA0 for 32=3D >>>>>>>>>>>>>>>>>>>>>>>>> bit systems. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> These are about 1 MB in size.=3D3DA0 After downloaded and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> copi= >>>>>>>>>>>>>>>>>>>>>> ed in=3D >>>>>>>>>>>>>>>>>>>>>>>>> to yo=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> ur >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Linux >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> partition: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> $ unzip wv*.zip >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Within the new folder: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> $ sudo dpkg -i *.deb >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> will=3D3DA0 complete the wvdial installation >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> Please read Modem/DOCs/wvdial.txt for usage information. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> The dkms driver upgrade utilities are installed=3D3D2C >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> Some modem drivers can only be used in 32 bit modem on >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> x86 64 = >>>>>>>>>>>>>>>>>>>>>> sys=3D >>>>>>>>>>>>>>>>>>>>>>>>> tem=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> s=3D3D2C >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> while some others are competent on x86 64 Systems.=3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Case= >>>>>>>>>>>>>>>>>>>>>> s are=3D >>>>>>>>>>>>>>>>>>>>>>>>> : >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg031= >>>>>>>>>>>>>>>>>>>>>> 19.=3D >>>>>>>>>>>>>>>>>>>>>>>>> htm=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> l >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> for the snd-hda-intel audio+modem driver. Also applicable >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to A= >>>>>>>>>>>>>>>>>>>>>> C97=3D >>>>>>>>>>>>>>>>>>>>>>>>> mo=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> dem >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> controllers. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> In both cases=3D3D2C 32 bit libraries must be installed >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to sup= >>>>>>>>>>>>>>>>>>>>>> port =3D >>>>>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> slmodemd >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> helper having a precompiled 32 bit component. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> 2) For USB modems using the slusb.ko driver. 32 bit >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> libraries = >>>>>>>>>>>>>>>>>>>>>> mus=3D >>>>>>>>>>>>>>>>>>>>>>>>> t b=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> e >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> installed to support the slmodemd helper having a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> precompiled = >>>>>>>>>>>>>>>>>>>>>> 32 =3D >>>>>>>>>>>>>>>>>>>>>>>>> bit >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> component >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> 3) The hsfmodem and hcfpcimodem drivers for Conexant >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chipsest = >>>>>>>>>>>>>>>>>>>>>> mod=3D >>>>>>>>>>>>>>>>>>>>>>>>> es =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> x86 64 competent. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0There are no blacklisted modem drivers in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /etc/modprobe= >>>>>>>>>>>>>>>>>>>>>> *=3D3DA=3D >>>>>>>>>>>>>>>>>>>>>>>>> 0 files >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0Potentially useful modem drivers now loaded are: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> snd h= >>>>>>>>>>>>>>>>>>>>>> da intel >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> Attached USB devices are: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0ID 0bda:0116 Realtek Semiconductor Corp. Mass >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Storage D= >>>>>>>>>>>>>>>>>>>>>> evice >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0ID 04f2:b012 Chicony Electronics Co.=3D3D2C Ltd >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1.3 MPi= >>>>>>>>>>>>>>>>>>>>>> xel UVC=3D >>>>>>>>>>>>>>>>>>>>>>>>> webcam >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0ID 03f0:0604 Hewlett-Packard DeskJet 840c >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0ID 1241:1177 Belkin F8E842-DL Mouse >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> If a cellphone is not detected=3D3D2C see >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> http://ubuntuforums.org/archive/index.php/t-878554.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> A sample report is: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg0057= >>>>>>>>>>>>>>>>>>>>>> 8.h=3D >>>>>>>>>>>>>>>>>>>>>>>>> tml >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> If a USB modem or cellphone is attached and was not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> detected= >>>>>>>>>>>>>>>>>>>>>> =3D3D2C=3D >>>>>>>>>>>>>>>>>>>>>>>>> plea=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> se >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> provide available information in your request to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> discuss@linmo= >>>>>>>>>>>>>>>>>>>>>> dem=3D >>>>>>>>>>>>>>>>>>>>>>>>> s.o=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> rg >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> For candidate card in slot 00:0f.0=3D3D2C firmware >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> information= >>>>>>>>>>>>>>>>>>>>>> and =3D >>>>>>>>>>>>>>>>>>>>>>>>> bootu=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> p >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> diagnostics are: >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0PCI slot=3D3DA0=3D3DA0=3D3DA0 PCI >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ID=3D3DA0=3D3DA0=3D3D= >>>>>>>>>>>>>>>>>>>>>> A0 =3D3DA0=3D3DA0=3D3DA=3D >>>>>>>>>>>>>>>>>>>>>>>>> 0 SubsystemID=3D3DA0=3D3DA0=3D3DA0 =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> Name >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3D3DA0----------=3D3DA0=3D3DA0=3D3DA0 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> ---------=3D3DA0=3D3DA0= >>>>>>>>>>>>>>>>>>>>>> =3D3DA0 ---------=3D >>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0 -------=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> ------- >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3D3DA000:0f.0=3D3DA0=3D3DA0=3D3DA0 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> 1039:7502=3D3DA0=3D3DA0=3D= >>>>>>>>>>>>>>>>>>>>>> 3DA0 1043:1783=3D3D=3D >>>>>>>>>>>>>>>>>>>>>>>>> A0=3D3DA0=3D3DA0 Audio devi=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> ce: Silicon Integrated >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> Systems [SiS] Azalia Audio Controller >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0Modem interrupt assignment and sharing: >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA018:=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 18017=3D3DA0=3D3= >>>>>>>>>>>>>>>>>>>>>> DA0=3D3DA0=3D3DA0=3D3DA0=3D >>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0=3D3DA0 384=3D3DA0=3D3DA0 IO-APIC-f=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> asteoi=3D3DA0=3D3DA0 HDA Intel >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0--- Bootup diagnostics for card in PCI slot >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 00:0f.0 ---= >>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> [=3D3DA0=3D3DA0=3D3DA0 0.521688] pci 0000:00:0f.0: reg 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 32bi= >>>>>>>>>>>>>>>>>>>>>> t mmio: >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> [0xfddf8000-0xfddfbfff] >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> [=3D3DA0=3D3DA0=3D3DA0 0.521724] pci 0000:00:0f.0: PME# >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> suppor= >>>>>>>>>>>>>>>>>>>>>> ted from =3D >>>>>>>>>>>>>>>>>>>>>>>>> D0 D3hot =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> D3cold >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> [=3D3DA0=3D3DA0=3D3DA0 0.521728] pci 0000:00:0f.0: PME# >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> disabl= >>>>>>>>>>>>>>>>>>>>>> ed >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> [=3D3DA0=3D3DA0 11.242765] HDA Intel 0000:00:0f.0: PCI >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> INT A -= >>>>>>>>>>>>>>>>>>>>>>> GSI 1=3D >>>>>>>>>>>>>>>>>>>>>>>>> 8 (leve=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> l=3D3D2C low) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> IRQ 18 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> [=3D3DA0=3D3DA0 11.242865] HDA Intel 0000:00:0f.0: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> setting lat= >>>>>>>>>>>>>>>>>>>>>> ency ti=3D >>>>>>>>>>>>>>>>>>>>>>>>> mer to =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> 64 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0The PCI slot 00:0f.0 of the modem card may be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> disabled = >>>>>>>>>>>>>>>>>>>>>> early=3D >>>>>>>>>>>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0a bootup process=3D3D2C=3D3DA0 but then enabled >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> later. = >>>>>>>>>>>>>>>>>>>>>> If modem =3D >>>>>>>>>>>>>>>>>>>>>>>>> drivers l=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> oad >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0but the=3D3DA0 modem is not responsive=3D3D2C read >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DOCs= >>>>>>>>>>>>>>>>>>>>>> /Bootup.t=3D >>>>>>>>>>>>>>>>>>>>>>>>> xt about =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> possible >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> fixes. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0Send dmesg.txt along with ModemData.txt to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> discuss@linm= >>>>>>>>>>>>>>>>>>>>>> odems=3D >>>>>>>>>>>>>>>>>>>>>>>>> .org >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0if help is needed. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D Advanced Linux Sound >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Archi= >>>>>>>>>>>>>>>>>>>>>> tecture (ALSA=3D >>>>>>>>>>>>>>>>>>>>>>>>> ) diagnostics=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> The ALSA packages provide audio support and also drivers >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> for s= >>>>>>>>>>>>>>>>>>>>>> ome >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> modems. >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> ALSA diagnostics are written during bootup to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /proc/asound/ fo= >>>>>>>>>>>>>>>>>>>>>> lde=3D >>>>>>>>>>>>>>>>>>>>>>>>> rs. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> The ALSA verion is 1.0.18 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> The modem cards detected by "aplay -l"=3D3DA0 are: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> tarjeta 0: SIS966 [HDA SIS966]=3D3D2C dispositivo 6: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Si3054 Mo= >>>>>>>>>>>>>>>>>>>>>> dem [=3D >>>>>>>>>>>>>>>>>>>>>>>>> Si305=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> 4 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Modem] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> ----------------------- >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> 00-00: ALC660-VD Analog : ALC660-VD Analog : playback 1 : >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> capt= >>>>>>>>>>>>>>>>>>>>>> ure=3D >>>>>>>>>>>>>>>>>>>>>>>>> 1 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> about /proc/asound/cards: >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> ------------------------ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA00 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> [SIS966=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3= >>>>>>>>>>>>>>>>>>>>>> DA0=3D3DA0 ]: HDA-Int=3D >>>>>>>>>>>>>>>>>>>>>>>>> el - HDA SIS966 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>>>>>>>>>>>>>>>>>>>> 0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 HDA =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> SIS966 at 0xfddf8000 irq 18 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0PCI slot 00:0f.0 has a High Definition Audio Card >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0The drivers are in the kernel modules tree at: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0/lib/modules/2.6.28-16-generic/kernel/sound/pci/hda/snd= >>>>>>>>>>>>>>>>>>>>>> -hda-=3D >>>>>>>>>>>>>>>>>>>>>>>>> intel=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> .ko >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> /lib/modules/2.6.28-15-generic/kernel/sound/pci/hda/snd-hda-in= >>>>>>>>>>>>>>>>>>>>>> tel=3D >>>>>>>>>>>>>>>>>>>>>>>>> .ko >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0The modem codec file for the HDA card is: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /proc/asound/= >>>>>>>>>>>>>>>>>>>>>> card0=3D >>>>>>>>>>>>>>>>>>>>>>>>> /code=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> c#1 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> -------------------------------------------------------- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Codec: Motorola Si3054 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Address: 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Vendor Id: 0x10573055 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> Subsystem Id: 0x10431316 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Revision Id: 0x100700 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> Modem Function Group: 0x1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0The audio card hosts a softmodem chip:=3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0x1057305= >>>>>>>>>>>>>>>>>>>>>> 5 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> The softmodem chip 0x10573055 is in principle supported >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> by the= >>>>>>>>>>>>>>>>>>>>>> CO=3D >>>>>>>>>>>>>>>>>>>>>>>>> MM >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> support >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of slmodemd >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> and the joint snd-hda-intel audio+modem driver=3D3D2C >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> begun wi= >>>>>>>>>>>>>>>>>>>>>> th AL=3D >>>>>>>>>>>>>>>>>>>>>>>>> SA ve=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> rsion >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1.0.13. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> For HDA cards with ALC883 chips=3D3D2C an upgrade to ALSA >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> veri= >>>>>>>>>>>>>>>>>>>>>> ons 1=3D >>>>>>>>>>>>>>>>>>>>>>>>> .0.15=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> way >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> be >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> necessary. Instructions for Upgrading snd-hda-intel and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> its de= >>>>>>>>>>>>>>>>>>>>>> pen=3D >>>>>>>>>>>>>>>>>>>>>>>>> den=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> t >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> driver >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> set are at: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg0083= >>>>>>>>>>>>>>>>>>>>>> 8.h=3D >>>>>>>>>>>>>>>>>>>>>>>>> tml >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> If not a Conexant modem=3D3D2C the driver snd-hda-intel >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with i= >>>>>>>>>>>>>>>>>>>>>> ts de=3D >>>>>>>>>>>>>>>>>>>>>>>>> pende=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> nt >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> drivers: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> snd hda intel=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0= >>>>>>>>>>>>>>>>>>>>>> =3D3DA0 559028=3D3DA0=3D >>>>>>>>>>>>>>>>>>>>>>>>> 6 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> snd pcm=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>>>>>>>>>>>>>>>>>>>> 0=3D3DA0=3D3DA0=3D3DA0=3D3D=3D >>>>>>>>>>>>>>>>>>>>>>>>> A0=3D3DA0=3D3DA0=3D3DA0 99464=3D3DA0 4 snd =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> hda intel=3D3D2Csnd pcm oss >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> snd=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D= >>>>>>>>>>>>>>>>>>>>>> 3DA0=3D3DA0=3D3DA0=3D3DA0=3D >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 78920=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0 19 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> snd hda intel=3D3D2Csnd pcm oss=3D3D2Csnd mixer oss=3D3D2Csnd = >>>>>>>>>>>>>>>>>>>>>> pcm=3D3D2Cs=3D >>>>>>>>>>>>>>>>>>>>>>>>> nd seq oss=3D3D >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3D2Csnd rawmidi=3D3D2Csnd seq=3D3D2Csnd timer=3D3D2Csnd seq devic= >>>>>>>>>>>>>>>>>>>>>> e >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> snd page alloc=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>>>>>>>>>>>>>>>>>>>> 0=3D3DA0 18704=3D3DA0=3D >>>>>>>>>>>>>>>>>>>>>>>>> 2 snd hda intel=3D3D2Csn=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> d pcm >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------- >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> provide audio + modem support with the modem chip >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> residing on = >>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> subsystem. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> Any particular card can host any one of several soft >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> modem chi= >>>>>>>>>>>>>>>>>>>>>> ps. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D Finished firmware and bootup >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> diagnostics= >>>>>>>>>>>>>>>>>>>>>> =3D3D2C nex=3D >>>>>>>>>>>>>>>>>>>>>>>>> t deducing =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> cogent >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> software. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> Predictive=3D3DA0 diagnostics for card in bus 00:0f.0: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0 Modem chipset=3D3DA0 detected on >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> NAME=3D3D3D"Audio device: Silicon Integrated Systems >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [SiS] Aza= >>>>>>>>>>>>>>>>>>>>>> lia A=3D >>>>>>>>>>>>>>>>>>>>>>>>> udio >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Controller" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CLASS=3D3D3D0403 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PCIDEV=3D3D3D1039:7502 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SUBSYS=3D3D3D1043:1783 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> IRQ=3D3D3D18 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> HDA=3D3D3D1039:7502 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> SOFT=3D3D3D1039:7502.HDA >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> HDAchipVendorID=3D3D3D1057 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CHIP=3D3D3D0x10573055 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> IDENT=3D3D3Dslmodemd >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> SLMODEMD DEVICE=3D3D3Dhw:0=3D3D2C6 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> Driver=3D3D3Dsnd-hda-intel >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0For candidate modem in:=3D3DA0 00:0f.0 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0 0403 Audio device: Silicon Integrated >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Systems [= >>>>>>>>>>>>>>>>>>>>>> SiS] Az=3D >>>>>>>>>>>>>>>>>>>>>>>>> alia Au=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> dio >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Controller >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 Primary device >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ID:=3D3DA0 = >>>>>>>>>>>>>>>>>>>>>> 1039:7502 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0 Subsystem PCI id=3D3DA0 1043:1783 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0 Softmodem codec or chipset from >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> diagnost= >>>>>>>>>>>>>>>>>>>>>> ics: 0x10=3D >>>>>>>>>>>>>>>>>>>>>>>>> 573055 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>>>>>>>>>>>>>>>>>>>> 0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3D >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>> from=3D3DA0= >>>>>>>>>>>>>>>>>>>>>> =3D3DA0=3D3DA0 Archives: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>>>>>>>>>>>>>>>>>>>> 0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3D >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0 The HDA card softmodem chip is 0x10573055 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> Support type needed or chipset:=3D3DA0=3D3DA0=3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> slmodemd = >>>>>>>>>>>>>>>>>>>>>> supportin=3D >>>>>>>>>>>>>>>>>>>>>>>>> g the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> snd-hda-intel >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> audio+modem driver >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0An ALSA (Advanced Linux Sound Architecture) modem >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> drive= >>>>>>>>>>>>>>>>>>>>>> r: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> snd-hda-intel >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0provides Low Level support enabling contact with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the mo= >>>>>>>>>>>>>>>>>>>>>> dem h=3D >>>>>>>>>>>>>>>>>>>>>>>>> ardwa=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> re. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0For all BUT Conexant chip soft modems (using >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> hsfmodem s= >>>>>>>>>>>>>>>>>>>>>> oftwa=3D >>>>>>>>>>>>>>>>>>>>>>>>> re) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0complementary High Level support is through a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Smartlink= >>>>>>>>>>>>>>>>>>>>>> util=3D >>>>>>>>>>>>>>>>>>>>>>>>> ity: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> slmodemd >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3DA0Download from >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> http://linmodems.technion.ac.il/packages/= >>>>>>>>>>>>>>>>>>>>>> smart=3D >>>>>>>>>>>>>>>>>>>>>>>>> link/ >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0the package SLMODEMD.gcc4.3.tar.gz having a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> compiled sl= >>>>>>>>>>>>>>>>>>>>>> modem=3D >>>>>>>>>>>>>>>>>>>>>>>>> d. Un=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> pack >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> under >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Linux with: >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 $ tar zxf >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SLMODEMD.gcc4.3.tar.gz >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0and read instructions therein. But briefly=3D3D2C >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the m= >>>>>>>>>>>>>>>>>>>>>> odem is=3D >>>>>>>>>>>>>>>>>>>>>>>>> setup =3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> command: >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 sudo slmodemd -c >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> YOUR COUNTRY --a= >>>>>>>>>>>>>>>>>>>>>> lsa hw:0=3D3D=3D >>>>>>>>>>>>>>>>>>>>>>>>> 2C6 >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0reporting dynamic creation of ports: >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0 /dev/ttySL0 --> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> /dev/pts/N=3D3DA0=3D3DA0= >>>>>>>>>>>>>>>>>>>>>> =3D3D2C with N=3D >>>>>>>>>>>>>>>>>>>>>>>>> some number >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3D3DA0Read DOCs/Smartlink.txt and >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> Modem/DOCs/YourSystem.txt f= >>>>>>>>>>>>>>>>>>>>>> or fo=3D >>>>>>>>>>>>>>>>>>>>>>>>> llow >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> through >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> guidance. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> Writing DOCs/Smartlink.txt >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3= >>>>>>>>>>>>>>>>>>>>>> D=3D3D3D=3D3D3D=3D3D3D end =3D >>>>>>>>>>>>>>>>>>>>>>>>> Smartlink section =3D3D3D=3D3D3D=3D3D3D=3D3D >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D= >>>>>>>>>>>>>>>>>>>>>> 3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D >>>>>>>>>>>>>>>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0Completed candidate modem analyses. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0The base of the UDEV device file system is: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/.udev >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0Versions adequately match for the compiler >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installed: 4= >>>>>>>>>>>>>>>>>>>>>> .3.3 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>>>>>>>>>>>>>>>>>>>> 0=3D3DA0=3D3DA0=3D3DA0 and =3D >>>>>>>>>>>>>>>>>>>>>>>>> the compiler used in kernel=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> assembly: 4.3.3 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0Minimal compiling resources appear complete: >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0=3D3DA0 make utility - /usr/bin/make >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3D3DA0=3D3DA0 Compiler version 4.3 >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0=3D3DA0 linuc headers base folder >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /lib/modules/2.6.28-1= >>>>>>>>>>>>>>>>>>>>>> 6-gener=3D >>>>>>>>>>>>>>>>>>>>>>>>> ic/buil=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> d >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0However some compilations and executable functions >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> may = >>>>>>>>>>>>>>>>>>>>>> need =3D >>>>>>>>>>>>>>>>>>>>>>>>> addit=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> ional >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> files=3D3D2C >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0in the FileNames.h (so called kernel "h"eaders) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> collect= >>>>>>>>>>>>>>>>>>>>>> ion i=3D >>>>>>>>>>>>>>>>>>>>>>>>> nstal=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> led >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /usr/include/ . >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0For martian modem=3D3D2C additional required >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> packages a= >>>>>>>>>>>>>>>>>>>>>> re need=3D >>>>>>>>>>>>>>>>>>>>>>>>> ed. The=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> also >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> required headers of package libc6 are commonly installed >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> by de= >>>>>>>>>>>>>>>>>>>>>> fau=3D >>>>>>>>>>>>>>>>>>>>>>>>> lt. >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0Compiling hsfmodem drivers does require >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> linux-libc-dev = >>>>>>>>>>>>>>>>>>>>>> and l=3D >>>>>>>>>>>>>>>>>>>>>>>>> ibc6-=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> dev >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> packages=3D3D2C for kernels 2.6.24 and later versions. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0In not included on your install CD=3D3D2C search >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> for th= >>>>>>>>>>>>>>>>>>>>>> em at >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> http://packages.ubuntu.com >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0or comparable Repository for other Linux distros. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0When compiling ALSA drivers=3D3D2C the utility >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "patch" = >>>>>>>>>>>>>>>>>>>>>> will al=3D >>>>>>>>>>>>>>>>>>>>>>>>> so be n=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> eeded. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> If a driver compilation fails=3D3D2C with message >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> including so= >>>>>>>>>>>>>>>>>>>>>> me la=3D >>>>>>>>>>>>>>>>>>>>>>>>> ck of=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> some >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> FileName.h (stdio.h for example)=3D3D2C then >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> Some additional kernel-header files need installation to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /usr/= >>>>>>>>>>>>>>>>>>>>>> inc=3D >>>>>>>>>>>>>>>>>>>>>>>>> lud=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> e. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> minimal additional packages are libc6-dev >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> and any of its dependents=3D3D2C under Ubuntu >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> linux-libc-dev >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> If an alternate ethernet connection is available=3D3D2C >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> $=3D3DA0 apt-get update >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> $=3D3DA0 apt-get -s install linux-kernel-devel >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> will install needed packages. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> For Debian/Ubuntu related distributions=3D3D2C run the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> followi= >>>>>>>>>>>>>>>>>>>>>> ng co=3D >>>>>>>>>>>>>>>>>>>>>>>>> mmand=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> to >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> display the needed package list: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Otherwise packages have to be found through >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://packages.ub= >>>>>>>>>>>>>>>>>>>>>> unt=3D >>>>>>>>>>>>>>>>>>>>>>>>> u.c=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> om >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Once downloaded and transferred into a Linux >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> partition=3D3D2C >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> they can be installed alltogether with: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> $ sudo dpkg -i *.deb >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> Checking pppd properties: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0 -rwsr-xr-- 1 root dip 321600 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2009-02-20 = >>>>>>>>>>>>>>>>>>>>>> 19:26 /us=3D >>>>>>>>>>>>>>>>>>>>>>>>> r/sbin/pp=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> pd >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> In case of an "error 17" "serial loopback" problem=3D3D2C >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> see: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg026= >>>>>>>>>>>>>>>>>>>>>> 37.=3D >>>>>>>>>>>>>>>>>>>>>>>>> htm=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> l >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> To enable dialout without Root permission do: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0 $ su - root=3D3DA0 (not for Ubuntu) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 sudo >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chmod a= >>>>>>>>>>>>>>>>>>>>>> +x /usr/sbin/pppd >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> or under Ubuntu related Linuxes >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0 sudo chmod a+x /usr/sbin/pppd >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Checking settings of:=3D3DA0=3D3DA0=3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /etc/ppp/options >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> asyncmap 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> noauth >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> crtscts >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> lock >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> hide-password >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> modem >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> proxyarp >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> lcp-echo-interval 30 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> lcp-echo-failure 4 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> noipx >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> In case of a message like: >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0=3D3DA0 Warning: Could not modify >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /etc/ppp/pap-secrets:= >>>>>>>>>>>>>>>>>>>>>> Permis=3D >>>>>>>>>>>>>>>>>>>>>>>>> sion de=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> nied >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> see >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg0= >>>>>>>>>>>>>>>>>>>>>> 465=3D >>>>>>>>>>>>>>>>>>>>>>>>> 6.h=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> tml >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> Read Modem/DOCs/YourSystem.txt concerning other COMM >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> channels:= >>>>>>>>>>>>>>>>>>>>>> et=3D >>>>>>>>>>>>>>>>>>>>>>>>> h0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wlan0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wmaster0 >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Which can interfere with Browser naviagation. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0Don't worry about the following=3D3D2C it is for >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> expert= >>>>>>>>>>>>>>>>>>>>>> s shoul=3D >>>>>>>>>>>>>>>>>>>>>>>>> d troub=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> le >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> shooting >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> be necessary. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3= >>>>>>>>>>>>>>>>>>>>>> D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D= >>>>>>>>>>>>>>>>>>>>>> 3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D= >>>>>>>>>>>>>>>>>>>>>> =3D3D3D=3D3D >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D= >>>>>>>>>>>>>>>>>>>>>> 3D=3D3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0Checking for modem support lines: >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0-------------------------------------- >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 /device/modem symbolic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> link:=3D3D= >>>>>>>>>>>>>>>>>>>>>> A0=3D3DA0 lrwxr=3D >>>>>>>>>>>>>>>>>>>>>>>>> wxrwx 1 root ro=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> ot 6 2009-11-01 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> 16:04 /dev/modem -> ttySL0 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> slmodemd created symbolic link /dev/ttySL0:=3D3DA0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> lrwxrwxrwx = >>>>>>>>>>>>>>>>>>>>>> 1 roo=3D >>>>>>>>>>>>>>>>>>>>>>>>> t roo=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> t 10 >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> 2009-11-01 16:04 /dev/ttySL0 -> /dev/pts/0 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 Within /etc/udev/ files: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 Within /etc/modprobe.conf >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> files: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> entries= >>>>>>>>>>>>>>>>>>>>>> in=3D >>>>>>>>>>>>>>>>>>>>>>>>> or=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> der >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> blacklist unwanted modem drivers >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> snd-atiixp-mo= >>>>>>>>>>>>>>>>>>>>>> dem >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> snd-via82xx-m= >>>>>>>>>>>>>>>>>>>>>> ode=3D >>>>>>>>>>>>>>>>>>>>>>>>> m >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> index= >>>>>>>>>>>>>>>>>>>>>> =3D3D3=3D >>>>>>>>>>>>>>>>>>>>>>>>> D-2 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> index= >>>>>>>>>>>>>>>>>>>>>> =3D3D=3D >>>>>>>>>>>>>>>>>>>>>>>>> 3D-2 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 Within any ancient >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /etc/devfs fil= >>>>>>>>>>>>>>>>>>>>>> es: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 Within ancient kernel 2.4.n >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /etc/= >>>>>>>>>>>>>>>>>>>>>> module.conf=3D >>>>>>>>>>>>>>>>>>>>>>>>> files: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> --------- end modem support lines -------- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> Thank you very much for helping me. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>>>>>>>>>>>>>>>>>>>> 0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3D >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3D= >>>>>>>>>>>>>>>>>>>>>> A0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0= >>>>>>>>>>>>>>>>>>>>>> =3D3DA0=3D3D >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 Alfredo >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> = >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> Inf=3D3DF3rmate=3D3D2C mantente en contacto y >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> encu=3D3DE9ntral= >>>>>>>>>>>>>>>>>>>>>> o todo=3D3D=3D >>>>>>>>>>>>>>>>>>>>>>>>> 2C a la vez=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> . Con la >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nueva >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> Toolbar de MSN =3D3DA0nunca has tenido tantas ventajas en >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tan = >>>>>>>>>>>>>>>>>>>>>> poco =3D >>>>>>>>>>>>>>>>>>>>>>>>> espac=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> io. >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> http://toolbar.es.msn.com/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> En tu material escolar no puede faltar el nuevo Pack de >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Emoticono= >>>>>>>>>>>>>>>>>>>>>> s V=3D >>>>>>>>>>>>>>>>>>>>>>>>> uel=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> ta >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> al Cole =3D3DA0=3D3DA1Desc=3D3DE1rgatelo gratis! Es muy >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> divertido >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> =3D3DBFSab=3D3DEDas que ahora puedes hablar por Messenger >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> desde H= >>>>>>>>>>>>>>>>>>>>>> otmail =3D >>>>>>>>>>>>>>>>>>>>>>>>> con tod=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>>> os tus >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> contactos? Revisa tu correo mientras conversas con tus >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> amigos. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.hotmail.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> =3D3D20 >>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> Convierte las fotos que m=3D3DE1s te gustan en tu nuevo fondo >>>>>>>>>>>>>>>>>>>>>>>>>>>> de esc= >>>>>>>>>>>>>>>>>>>>>> ritor=3D >>>>>>>>>>>>>>>>>>>>>>>>> io par=3D3D >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> a el ordenador. Es f=3D3DE1cil y adem=3D3DE1s gratis >>>>>>>>>>>>>>>>>>>>>>>>>>>> http://wallpapers.msn.com/es-es=3D3D >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> Vive toda la experiencia de Messenger con Orange desde tu >>>>>>>>>>>>>>>>>>>>>>>>>>> Blackberry = >>>>>>>>>>>>>>>>>>>>>> =3DA1=3D >>>>>>>>>>>>>>>>>>>>>>>>> Desc=3DFAbrelo! >>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>> http://serviciosmoviles.es.msn.com/messenger/blackberry.aspx >>>>>>>>>>>>>>>>>>>>>>>>> =3D20 >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> =3DBFSab=3DEDas que ahora puedes hablar por Messenger desde >>>>>>>>>>>>>>>>>>>>>>>>> Hotmail con= >>>>>>>>>>>>>>>>>>>>>> todos t=3D >>>>>>>>>>>>>>>>>>>>>>>>> us contactos? Revisa tu correo mientras conversas con tus >>>>>>>>>>>>>>>>>>>>>>>>> amigos.=3D20 >>>>>>>>>>>>>>>>>>>>>>>>> http://www.hotmail.com =3D >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Vive toda la experiencia de Messenger con Orange desde tu >>>>>>>>>>>>>>>>>>>>>>>> Blackberry =A1= >>>>>>>>>>>>>>>>>>>>>> Desc=FAbrelo! >>>>>>>>>>>>>>>>>>>>>>>> http://serviciosmoviles.es.msn.com/messenger/blackberry.aspx >>>>>>>>>>>>>>>>>>>>>> =20 >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> S=F3lo hay un loro experto en Windows 7 en todo el mundo. Y vive en >>>>>>>>>>>>>>>>>>>>>> Sietes = >>>>>>>>>>>>>>>>>>>>>> =A1C=F3nocelo! >>>>>>>>>>>>>>>>>>>>>> http://www.sietesunpueblodeexpertos.com/= >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Deja que Sietes te enseñe todo los secretos de Windows >>>>>>>>>>>> http://www.sietesunpueblodeexpertos.com/ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Date una vuelta por Sietes y conoce el pueblo de los expertos en Windows 7 >>>>>>>>>> http://www.sietesunpueblodeexpertos.com/ >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>> >>> >>> >> >> >> >> >> >
