Aditya, scanModem also reported that: The dialer utility package WVDIAL does not appear to be installed on your System. Please read Modem/DOCs/wvdial.txt But now since you have it installed, this should be no problem. The problem might be that you need to leave slmodemd running on one terminal and then run wvdialconf on another and the modem port should be found. If it is the case that it is not like your post: aditya@aditya-desktop ~ $ sudo slmodemd -c INDIA /dev/slamr0 error: mdm setup: cannot stat `/dev/slamr0': No such file or directory error: cannot setup device `/dev/slamr0 then it could be problem with sl-modem-daemon? Regards, Antonio On 9/27/09, Aditya Jog <a_dd1@xxxxxxxxx> wrote: > Oliveres, > I am not finding the dialer in MINT ... how are I supposed to 'Dial out" ? > > This is my output for everything ... I dought there is some prob ... > > I do not understand anything abt this ... I am new to linux > > here is my output >>> > > aditya@aditya-desktop /media/aditya/Software_Setup/Mint/Mint > Dialup/slamr-2.6.28-11-generic $ sudo ./setup > > installing drivers for kernel version 2.6.28-11-generic > > > > installing drivers for kernel version 2.6.28-11-generic > > > > Writing record to ./Slamr.txt > > Installing the Debian packages supporting autoloading > > (Reading database ... 106476 files and directories currently installed.) > > Preparing to replace sl-modem-daemon 2.9.11~20080817-3ubuntu2 (using > sl-modem-daemon_2.9.11~20080817-3ubuntu2_i386.deb) ... > > Shutting down SmartLink Modem driver normally ... no slmodemd daemon > running. > > Unloading modem driver from kernel ... slamr. > > Unpacking replacement sl-modem-daemon ... > > Setting up sl-modem-daemon (2.9.11~20080817-3ubuntu2) ... > > The system user `Slmodemd' already exists. Exiting. > > Not starting SmartLink modem daemon (options not set in > /etc/default/slmodemd) > > > > Processing triggers for man-db ... > > > > Copying over newer files > > Making folder /lib/modules/2.6.28-11-generic/extra > > Copying drivers to /lib/modules/2.6.28-11-generic/extra > > Checking driver install > > slamr.ko > > slusb.ko > > ungrab-winmodem.ko > > Copying newer slmodemd to /usr/sbin/ > > Checking slmodemd version. Should be 2.9.11 > > SmartLink Soft Modem: version 2.9.11 May 18 2009 18:31:59 > > Finished installs. > > Informing the System > > > > Starting function tests, loading drivers: > > Running diagnostic: > > > > [ 387.497900] slamr: module license 'Smart Link Ltd.' taints kernel. > > [ 387.508510] slamr: SmartLink AMRMO modem. > > [ 387.508546] slamr: probe 1057:3052 SL1900 card... > > [ 387.508559] slamr 0000:04:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ > 21 > > [ 387.795343] slamr: slamr0 is SL1900 card. > > [ 578.951990] slamr 0000:04:06.0: PCI INT A disabled > > [ 581.045979] slamr: SmartLink AMRMO modem. > > [ 581.046016] slamr: probe 1057:3052 SL1900 card... > > [ 581.046028] slamr 0000:04:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ > 21 > > [ 581.136345] slamr: slamr0 is SL1900 card. > > ports should be created by: > > slmodemd -c /dev/slamr0 > > Checking for success > > Port creation with slmodemd failed. > > Read the Slamr.txt record, other *.txt files and the sample wvdial.conf . > > > > > aditya@aditya-desktop ~ $ sudo wvdialconf /etc/wvdial.conf > > Editing `/etc/wvdial.conf'. > > > > Scanning your serial ports for a modem. > > > > ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > > ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud > > ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > > Modem Port Scan<*1>: S1 S2 S3 > > > > > > Sorry, no modem was detected! Is it in use by another program? > > Did you configure it properly with setserial? > > > > Please read the FAQ at http://open.nit.ca/wiki/?WvDial > > > > If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>. > > > > _________________________________________________________ > > > aditya@aditya-desktop ~ $ sudo slmodemd -c INDIA /dev/slamr0 > > error: mdm setup: cannot stat `/dev/slamr0': No such file or directory > > error: cannot setup device `/dev/slamr0' > > _________________________________________________________ > > > My wvdial.conf now reads like this --> > > [Dialer Defaults] > > Modem = /dev/ttySL0 > > Baud = 115200 > > Init1 = ATZ > > Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > > ISDN = 0 > > Modem Type = Analog Modem > > Phone = 172222 > > Username = $^%%##@ > Password = ^%^%$$#$ > Carrier Check = no > > > > > > > --- On Fri, 25/9/09, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: > >> From: Antonio Olivares <olivares14031@xxxxxxxxx> >> Subject: Re: Aditya,INDIA Linux Mint 7 Gloria - Main Edition kernel >> 2.6.28-11-generic >> To: "Aditya Jog" <a_dd1@xxxxxxxxx> >> Cc: discuss@xxxxxxxxxxxxx >> Date: Friday, 25 September, 2009, 2:40 PM >> Aditya, >> >> Since you have installed the driver and it is recognized, >> please run >> the following: >> >> $ sudo wvdialconf /etc/wvdial.conf >> after you have successfully run >> $ sudo slmodemd -c INDIA /dev/slamr0 >> >> then after the modem is recognized Open the file with >> vi/gedit using >> $ sudo gedit /etc/wvdial.conf >> edit the password/username/phone number after removing the >> ";" and add >> a line "Carrier Check = no" to your wvdial.conf file and >> save it and >> then try to dialout/connect. Read the file >> Modem/DOCs/wvdial.txt if >> you have difficulties. >> >> Report back if you have trouble. >> >> Regards, >> >> Antonio >> >> On 9/25/09, Aditya Jog <a_dd1@xxxxxxxxx> >> wrote: >> > Thanx for ur reply, >> > I have downloaded slamr-2.6.28-11-generic.tar.gz & >> went through the process >> > ... then what ??? how i am supposed to connect to >> internet ? >> > >> > >> > --- On Thu, 24/9/09, Antonio Olivares <olivares14031@xxxxxxxxxx> >> wrote: >> > >> >> From: Antonio Olivares <olivares14031@xxxxxxxxx> >> >> Subject: Re: Aditya,INDIA Linux Mint 7 Gloria - >> Main Edition kernel >> >> 2..6.28-11-generic >> >> To: "Aditya Jog" <a_dd1@xxxxxxxxx> >> >> Cc: Discuss@xxxxxxxxxxxxx >> >> Date: Thursday, 24 September, 2009, 7:51 PM >> >> Aditya, >> >> >> >> Download the precompiled slamr from >> >> >> >> http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/slamr-2.6.28-11-generic.tar.gz >> >> >> >> extract it with >> >> $ tar -zxvf slamr-2.6.28-11-generic.tar.gz >> >> $ cd slamr-2.6.28-11-generic >> >> $ sudo ./setup >> >> >> >> should setup everything for you. Should you >> have >> >> further questions, >> >> please reply back. >> >> This since your kernel is the same as Ubuntu's >> >> CPU=i686, Linux Mint 7 Gloria - Main >> Edition >> >> Linux version 2.6.28-11-generic (buildd@palmer) >> ..... >> >> >> >> >> >> >> >> Predictive diagnostics for card in bus >> 04:06.0: >> >> Modem chipset >> detected on >> >> NAME="Modem: Motorola SM56 Data Fax Modem " >> >> CLASS=0703 >> >> PCIDEV=1057:3052 >> >> SUBSYS=1057:3020 >> >> IRQ=21 >> >> IDENT=slamr >> >> >> >> For candidate modem in: 04:06..0 >> >> 0703 Modem: Motorola SM56 Data Fax >> Modem >> >> Primary device >> ID: 1057:3052 >> >> Support type needed or chipset: >> slamr >> >> >> >> >> >> >> >> Writing DOCs/Intel.txt >> >> >> >> 1057:3052 has a Motorola chipset, poorly >> supported by >> >> Motorola itself >> >> However Zello discovered that drivers >> written to support >> >> Smartlink >> >> modems do support the 1057:3052 chipset!! >> >> It sufficed to add 1057:3052 to the list of >> modem cards >> >> recognized by >> >> the Smartlink slamr driver. >> >> There is a ungrab-winmodem driver used in >> conjunction with >> >> slamr, >> >> which must have 1057:3052 >> >> similarly added. See messages from Zello: >> >> >> >> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html >> >> >> >> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html >> >> and Alvaro Aguirre about the ungrab-winmodem >> fix: >> >> >> >> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html >> >> For general guidance on ungrab-winmodem + >> slamr usage, >> >> read the >> >> DOCs/Smartlink.txt >> >> >> >> The modem is supported by the Smartlink >> >> plus the slmodemd helper utility. Read the >> >> DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt >> for follow >> >> through guidance. >> >> >> >> >> >> For 2.6.28-11-generic compiling drivers is >> necessary. As of >> >> October >> >> 2007 the current packages at >> >> http://linmodems.technion.ac.il/packages/smartlink/ >> >> are the >> >> ungrab-winmodem-20070505.tar.gz and >> >> slmodem-2.9.11-20080126.tar.gz >> >> >> >> >> >> Regards, >> >> >> >> Antonio >> >> >> >> On Thu, Sep 24, 2009 at 12:58 PM, Aditya Jog >> <a_dd1@xxxxxxxxx> >> >> wrote: >> >> > Find the Modemdata attached >> >> > >> >> > >> >> > Add whatever you love to >> the Yahoo! India >> >> homepage. Try now! http://in.yahoo.com/trynew >> >> >> > >> > >> > Yahoo! India has a new >> look. Take a sneak peek >> > http://in.yahoo.com/trynew >> > >> > >> > > > Now, send attachments up to 25MB with Yahoo! India Mail. Learn how. > http://in.overview.mail.yahoo.com/photos > >
