Aditya, Since you have installed the driver and it is recognized, please run the following: $ sudo wvdialconf /etc/wvdial.conf after you have successfully run $ sudo slmodemd -c INDIA /dev/slamr0 then after the modem is recognized Open the file with vi/gedit using $ sudo gedit /etc/wvdial.conf edit the password/username/phone number after removing the ";" and add a line "Carrier Check = no" to your wvdial.conf file and save it and then try to dialout/connect. Read the file Modem/DOCs/wvdial.txt if you have difficulties. Report back if you have trouble. Regards, Antonio On 9/25/09, Aditya Jog <a_dd1@xxxxxxxxx> wrote: > Thanx for ur reply, > I have downloaded slamr-2.6.28-11-generic.tar.gz & went through the process > ... then what ??? how i am supposed to connect to internet ? > > > --- On Thu, 24/9/09, Antonio Olivares <olivares14031@xxxxxxxxxx> wrote: > >> From: Antonio Olivares <olivares14031@xxxxxxxxx> >> Subject: Re: Aditya,INDIA Linux Mint 7 Gloria - Main Edition kernel >> 2.6.28-11-generic >> To: "Aditya Jog" <a_dd1@xxxxxxxxx> >> Cc: Discuss@xxxxxxxxxxxxx >> Date: Thursday, 24 September, 2009, 7:51 PM >> Aditya, >> >> Download the precompiled slamr from >> >> http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/slamr-2.6.28-11-generic.tar.gz >> >> extract it with >> $ tar -zxvf slamr-2.6.28-11-generic.tar.gz >> $ cd slamr-2.6.28-11-generic >> $ sudo ./setup >> >> should setup everything for you. Should you have >> further questions, >> please reply back. >> This since your kernel is the same as Ubuntu's >> CPU=i686, Linux Mint 7 Gloria - Main Edition >> Linux version 2.6.28-11-generic (buildd@palmer) .... >> >> >> >> Predictive diagnostics for card in bus 04:06.0: >> Modem chipset detected on >> NAME="Modem: Motorola SM56 Data Fax Modem " >> CLASS=0703 >> PCIDEV=1057:3052 >> SUBSYS=1057:3020 >> IRQ=21 >> IDENT=slamr >> >> For candidate modem in: 04:06..0 >> 0703 Modem: Motorola SM56 Data Fax Modem >> Primary device ID: 1057:3052 >> Support type needed or chipset: slamr >> >> >> >> Writing DOCs/Intel.txt >> >> 1057:3052 has a Motorola chipset, poorly supported by >> Motorola itself >> However Zello discovered that drivers written to support >> Smartlink >> modems do support the 1057:3052 chipset!! >> It sufficed to add 1057:3052 to the list of modem cards >> recognized by >> the Smartlink slamr driver. >> There is a ungrab-winmodem driver used in conjunction with >> slamr, >> which must have 1057:3052 >> similarly added. See messages from Zello: >> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html >> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html >> and Alvaro Aguirre about the ungrab-winmodem fix: >> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html >> For general guidance on ungrab-winmodem + slamr usage, >> read the >> DOCs/Smartlink.txt >> >> The modem is supported by the Smartlink >> plus the slmodemd helper utility. Read the >> DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow >> through guidance. >> >> >> For 2.6.28-11-generic compiling drivers is necessary. As of >> October >> 2007 the current packages at >> http://linmodems.technion.ac.il/packages/smartlink/ >> are the >> ungrab-winmodem-20070505.tar.gz and >> slmodem-2.9.11-20080126.tar.gz >> >> >> Regards, >> >> Antonio >> >> On Thu, Sep 24, 2009 at 12:58 PM, Aditya Jog <a_dd1@xxxxxxxxx> >> wrote: >> > Find the Modemdata attached >> > >> > >> > Add whatever you love to the Yahoo! India >> homepage. Try now! http://in.yahoo.com/trynew >> > > > Yahoo! India has a new look. Take a sneak peek > http://in.yahoo.com/trynew > >
