Hi,
more precisely, installing alsa-driver-linuxant will be required before
installing the HSF driver for this setup. The former can be downloaded at:
http://www.linuxant.com/alsa-driver/
and we do have a pre-compiled package for the kernel you are using.
There's no need to manually install an ALSA patch with
alsa-driver-linuxant installed.
Regards,
Jonathan
Technical specialist / Linuxant
www.linuxant.com
support@xxxxxxxxxxxx
Antonio Olivares wrote:
B, Baker,
Then in in this case the patch utility is needed.
as scanModem reports
The patch utility is needed and is needed for compiling ALSA drivers,
and possibly others.
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.28-11-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in /usr/include/ .
For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of
some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Look for the patch utility on Linuxant page and install as directions
should be given in Modem/DOCs/Conexant.txt
Regards,
Antonio
On 8/10/09, pestkop@xxxxxxxxx <pestkop@xxxxxxxxx> wrote:
Hello Antonio,
I have a new problem.
see below:
Selecting previously deselected package hsfmodem.
(Reading database ... 102003 files and directories currently installed.)
Unpacking hsfmodem (from
hsfmodem_7.80.02.04full_k2.6.28_11_generic_ubuntu_i386.deb) ...
dpkg: dependency problems prevent configuration of hsfmodem:
hsfmodem depends on alsa-driver-linuxant; however:
Package alsa-driver-linuxant is not installed.
dpkg: error processing hsfmodem (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
hsfmodem
Thanks in advance.
B Baker
Antonio Olivares writes:
B Baker,
scanModem reports the following information:
The dialer utility package WVDIAL does not appear to be installed on
your System.
Please read Modem/DOCs/wvdial.txt
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
02:0d.0 14f1:2013 155d:8850 Communication controller: Conexant
Systems, Inc. HSF 56k Data/Fax Modem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 02:0d.0 ----
[ 0.822028] pci 0000:02:0d.0: reg 10 32bit mmio:
[0xf2000000-0xf200ffff]
[ 0.822037] pci 0000:02:0d.0: reg 14 io port: [0x2400-0x2407]
[ 0.822076] pci 0000:02:0d.0: PME# supported from D0 D3hot D3cold
[ 0.822082] pci 0000:02:0d.0: PME# disabled
The PCI slot 02:0d.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate modem in: 02:0d.0
0780 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax
Modem
Primary device ID: 14f1:2013
Support type needed or chipset: hsfmodem
For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.02full_k2.6.28_11_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
Follow the directions given therein and report back if you have questions.
Regards,
Antonio
On 8/7/09, pestkop@xxxxxxxxx <pestkop@xxxxxxxxx> wrote:
Hello,
Enclosed is my error for trying to install a modem on my ubuntu operating
system.
Can you let me know my error.
thank you,
B Baker
