Andre, 1) Try to delete the folder martian-full-20080625/ 2) re-extract it again tar -zxvf martian-full-20080625.tar.gz 3) run make all and then if there are no errors run 4) make install If you get error messages, please put them as they appear. I used to run Mandrake a while back also and it brings me memories too. I had to hunt down several rpms like the devel package here to compile slmodem-2.9.X code. It does take some time to fix, but once it is working all is well after that. The trouble might be with the weird extensions -2mdk, -1mdk but that is another topic. Regards, Antonio On Mon, Jun 22, 2009 at 10:19 PM, Andre Dubuc<aajdubuc@xxxxxxxxxxx> wrote: > Hi Antonio, > > Now, at least, the compiler has found ../build sub dir but still gives error: > > "No rule to make target 'modules' Stop" > Any ideas what's messed up? > > Tia, > > Andre > > > > On June 22, 2009, Antonio Olivares wrote: >> Andre, >> >> You need to find tbe kernel-devel package for 2.6.22.9-desktop-mdk >> >> You may find it here: >> >> http://rpmfind.net/linux/RPM/Development_Kernel.html >> >> Be careful with getting another one that does not match the one you are >> running: >> >> 2.6.22.9-desktop586-1mdv >> >> http://rpmfind.net/linux/RPM/mandriva/2008.0/i586/media/main/release/kernel >>-desktop-devel-latest-2.6.22.9-1mdv2008.0.i586.html >> >> which shows the page: To get the needed package click following link: >> >> ftp://fr2.rpmfind.net/linux/Mandriva/official/2008.0/i586//media/main/relea >>se/kernel-desktop-devel-latest-2.6.22.9-1mdv2008.0.i586.rpm >> >> Do download it and install that package unless you have cd/dvd with >> kernel sources from which you may mount it and copy/perform its >> installation. After installing this package the rest of the >> compilation should work. >> >> Sorry for not getting back sooner, but I was not comprehending >> everything that was going on. >> >> Regards, >> >> Antonio >> >> On 6/22/09, Andre Dubuc <aajdubuc@xxxxxxxxxxx> wrote: >> > Hi Antonio, >> > >> > Yes, I was using the martian-full-20070625.tar.gz which I extracted, and >> > ran against the running kernel. >> > >> > reading DriverCompiling.txt #6): >> > >> > "now build the kernel-headers with . . . for 2.6.n kernels 'make >> > bzImage' " >> > >> > I've tried to compile the martian-full package, but get an error that >> > ~/build -- 'no such file or directory' >> > (under /lib/modules/2.6.22.9-desktop586-1mdv/build) >> > The build subdir doesn't exist, it has only only a 'kernel' subdir with >> > no 'build' either. >> > >> > One thing I noticed is that the kernel header file does not have the >> > '586' after 'desktop', but is re-directing properly to the >> > /lib/modules/.... >> > >> > Somehow, I think it has something messed from the source >> > (boot/vmlinux-2.6.22.9-desktop586-1mdv) with the source headers >> > (/usr/src/linux-2.6.22.9-desktop-1mdv) with EXTRAVERSION set >> > as '.9-desktop-1mdv') >> > >> > Sigh . . . >> > >> > On June 22, 2009, you wrote: >> >> Andre, >> >> >> >> The make bzImage command appears to be unnecessary here. Did you get >> >> the file martian-20080625.tar.gz? This is the file you need to >> >> download and compile against your running kernel. >> >> >> >> scanModem reports that you need: >> >> >> >> =================================================================== >> >> >> >> Support type needed or chipset: Agere.DSP >> >> >> >> >> >> >> >> The modem has a Lucent/Agere/LSI Mars or Apollo DSP (digital signal >> >> processing) chipset. >> >> Support packages for 2.6.n kernels are at: >> >> http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ >> >> Always use the most update for kernels after 2.6.20, currently >> >> martian-full-20080625.tar.gz >> >> For kernels 2.6.20 and less, usr martian-full-20080407.tar.gz. >> >> >> >> See DOCs/AgereDSP.txt for Details. >> >> >> >> and it also reports that you need kernel headers >> >> >> >> linux-headers-2.6.22.9-desktop586-1mdv resources needed for compiling >> >> are not manifestly ready! >> >> The patch utility is needed and is needed for compiling ALSA drivers, >> >> and possibly others. >> >> >> >> If compiling is necessary packages must be installed, providing: >> >> kernel-desktop-devel-2.6.22.9-desktop586-1mdv >> >> >> >> >> >> If you have the kernel sources/kernel-devel-2.6.22.9-desktop586-1mdv >> >> package installed proceed to extract and compile the >> >> martian-full-20080625.tar.gz package. >> >> >> >> Regards, >> >> >> >> Antonio >> >> >> >> On Sun, Jun 21, 2009 at 11:58 PM, Andre Dubuc<aajdubuc@xxxxxxxxxxx> > wrote: >> >> > Hi folks, >> >> > >> >> > I received an error that terminated 'make bzImage': >> >> > >> >> > 'no rule to make target 'init/main.o', needed by 'init/built-in.o' ' >> >> > >> >> > Sigh . . this sure is *fun* to get this modem working! Help? > > >
