Re: Tapan Chugh, India kernel 2.6.27.5-117.fc10.i686

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Philippe Vouters wrote:
> Should I say Dear Tapan or Dear Chugh ? What is your given name ?
>
> >From my makefile_537 Makefile script, here is what I can read:
> intel-536-537/makefile_537:     vendor_device_ids[3]="1543:3052";\
>
> Entering the following commands:
> [philippe@victor ~]$ grep "3052" intel-536-537/coredrv/*.h
> intel-536-537/coredrv/hamcore.h:  #define NEW_SI3052_VENDOR_ID
> 0x1543
> intel-536-537/coredrv/hamcore.h:  #define NEW_SI3052_DEVICE_ID
> 0x3052
> intel-536-537/coredrv/hamcore.h:  #define SI3052_VENDOR_ID 0x8086
> intel-536-537/coredrv/hamcore.h:  #define SI3052_DEVICE_ID 0x1080
> intel-536-537/coredrv/hamcore.h:  #define MDM_PCI_DEVICE_ID      0x3052
> [philippe@victor ~]$ grep "1543" intel-536-537/coredrv/*.h
> intel-536-537/coredrv/hamcore.h:  #define NEW_SI3052_VENDOR_ID
> 0x1543
>
> So your phone modem should be recognized as being a Silicon phone modem
> board by the Intel 537 driver.
>
> I suggest you to go to http://vouters.dyndns.org:8080/Intel site and
> download the latest driver. You should $ tar -jxvf the downloaded
> driver. Use efax and dmesg to troubleshoot it.
>
> You need to install kernel headers and devel packages prior to build the
> driver.
>
> Yours sincerely,
> -  
> http://vouters.dyndns.org:8080/
> Philippe Vouters (Fontainebleau/France)
>
>
> Le mercredi 17 juin 2009 à 08:49 +0200, Marvin Stodolsky a écrit :
>   
>> Tapan,
>>
>> Sadly, Linux support has not yet been achieved for
>> 1543:3052	 SILICON Laboratories Intel 537 [Winmodem]
>> though Philippe may guide you in some expreiments
>>
>> MarvS
>>
>> On Tue, Jun 16, 2009 at 12:10 PM, Tapan Chugh<chugh.tapan@xxxxxxxxx> wrote:
>>     
>>>       
>
>
>   
Dear Philippe,
Thanks  for helping me. I followed your instructions and installed the
intel 537. However when i try to test it using efax i get an error message

efax: Wed Jun 17 22:34:13 2009 efax v 0.9a-001114 Copyright 1999 Ed Casas
efax: Wed Jun 17 22:34:13 2009 efax v 0.9a-001114 Copyright 1999 Ed Casas
efax: 34:13 compiled Oct 24 2008 10:36:30
efax: 34:13 Error: can't open serial port /dev/537ep: Bad address
efax: 34:13 done, returning 2 (unrecoverable error)


also i have pasted the part of dmesg log

Intel 537EP card found
serial8250: too much work for irq21
serial8250: too much work for irq21
serial8250: too much work for irq21
serial8250: too much work for irq21
serial8250: too much work for irq21
serial8250: too much work for irq21
Unknown device, exiting
Unknown device, exiting
Unknown device, exiting
Unknown device, exiting
Unknown device, exiting
Unknown device, exiting
Unknown device, exiting
serial8250: too much work for irq21
serial8250: too much work for irq21
serial8250: too much work for irq21
serial8250: too much work for irq21
Unknown device, exiting



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux