RE: if test -d /usr/src/$SRC
Change this line to:
if test -d /usr/src/$SRC ; then
MarvS
On Mon, May 18, 2009 at 8:02 PM, Antonio Olivares
<olivares14031@xxxxxxxxx> wrote:
> I installed dkms module in order to install the other dkms enabled
> packages. I made a mistake, I did the -2mdk instead of the -7mdk
> sources, so I guess it will not worK :(
>
> root@slax:~# dkms agrsm-2.1.80-7mdv2009.0.tar.gz
>
> Error! Unknown action specified: agrsm-2.1.80-7mdv2009.0.tar.gz
> Usage: /usr/sbin/dkms [action] [options]
> [action] = { add | remove | build | install | uninstall | match
> | mkdriverdisk | mktarball | ldtarball | mkrpm | mkkmp
> | mkdeb | status }
> [options] = [-m module] [-v module-version] [-k kernel-version] [-a arch]
> [-d distro] [-c dkms.conf-location] [-q] [--force] [--all]
> [--templatekernel=kernel] [--directive='cli-directive=cli-value']
> [--config=kernel-.config-location] [--archive=tarball-location]
> [--kernelsourcedir=source-location] [--no-prepare-kernel]
> [--binaries-only] [--source-only] [-r release (SuSE)] [--verbose]
> [--size] [--spec=specfile] [--media=floppy|iso|tar]
> root@slax:~# dkms install agrsm-2.1.80-7mdv2009.0.tar.gz
>
> Error! Invalid number of parameters passed.
> Usage: install -m <module> -v <module-version>
> root@slax:~# dkms install -m agrsm-2.1.80-7mdv2009.0.tar.gz
>
> Error! Invalid number of parameters passed.
> Usage: install -m <module> -v <module-version>
>
>
> I have no experience to limited with dkms instructions. I don't know
> how to use it as I should.
>
> I unpacked the tarball the agrsm-2.1.80-7mdk2009.0 tar ball and ran
> ./setup, but it fails with the following:
>
> root@slax:~/agrsm-2.1.80-7mdv2009.0# ./setup
> ./setup: line 9: syntax error near unexpected token `else'
> ./setup: line 9: ` else'
> root@slax:~/agrsm-2.1.80-7mdv2009.0# cat se
> serial26.c serial26.c.2.6.27 setup
> root@slax:~/agrsm-2.1.80-7mdv2009.0# cat setup
> #!/bin/sh
> if test -x /usr/sbin/dkms ; then
> mkdir -p /usr/src
> VER=2.1.80-7mdv2009.0
> SRC=agrsm-$VER
> cp -a ../$SRC /usr/src/
> if test -d /usr/src/$SRC
> echo "Copied source package to /usr/src/$SRC"
> else
> echo "Copy failed of source package to /usr/src/$SRC !!"
> echo "exiting"
> echo
> exit
> fi
> cat<<END
>
> Successively running:
> /usr/sbin/dkms --rpm_safe_upgrade add -m agrsm -v $VER
> /usr/sbin/dkms --rpm_safe_upgrade build -m agrsm -v $VER
> /usr/sbin/dkms --rpm_safe_upgrade install -m agrsm -v $VER
>
> END
> sleep 1
> /usr/sbin/dkms --rpm_safe_upgrade add -m agrsm -v $VER
> /usr/sbin/dkms --rpm_safe_upgrade build -m agrsm -v $VER
> /usr/sbin/dkms --rpm_safe_upgrade install -m agrsm -v $VER
> else
> echo "Necessary /usr/sbin/dkms not found. Install a dkms package.
> Then rerun the setup."
> fi
> exit 0root@slax:~/agrsm-2.1.80-7mdv2009.0#
>
> NOTE:
> I am trying dkms on Slax Linux Live CD(formerly known as Slackware
> Live CD), and I just converted a Fedora 10 package using rpm2tgz and
> then using Slax special tool tgz2lzm which makes slax modules.
>
>
>
> Thanks,
>
> Antonio
>
> On 5/18/09, Antonio Olivares <olivares14031@xxxxxxxxx> wrote:
>> On 5/18/09, Nikolay Zhuravlev <xxor@xxxxxxx> wrote:
>>> Antonio,
>>>
>>> Thus spake Antonio Olivares (olivares14031@xxxxxxxxx):
>>>
>>>> Marv and Nicokay,
>>>>
>>>> I have assembled lzm packages for Slax Linux Live CD. I hope other
>>>> users that have these kinds of modems can test the functionality of
>>>> these. I used
>>>>
>>>> rpm2tgz , then tgz2lzm to make the Slax Modules. Modules are located
>>>> here:
>>>
>>>
>>> What RPMs did you use as a starting point for the "7mdv" driver.
>>>
>>>
>>> [skip]
>>>> dkms-agrsm-2.1.80-7mdv2009.0
>>>> http://www.slax.org/modules.php?action=detail&id=2477
>>>
>>> I am confused. The link points to the "2mdv", not "7mdv" lzm/rpm
>>
>> Yes it is pointing to the 2, sorry about that, but I do have the 7 on
>> hard disk and also on module I posted. Jacques has not mounted the
>> new file, I guess.
>>>
>>>
>>>>
>>>> Slax forum is over here with post. We will appreciate all kinds of
>>>> input.
>>>>
>>>> http://www.slax.org/forum.php?action=view&parentID=39934
>>>>
>>>> One user wants to know if these packages take care of the
>>>> snd_hda_inport and snd_hda_export that was in the 11c11040 howto:
>>>>
>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/HOWTO-Agere-11c11040-HDA.html
>>>
>>>
>>> If you are talking about snd_hda_codec_{read,write}, then yes, the "?mdv"
>>> series
>>> fixes the EXPORT_SYMBOL issue. You don't have to recompile the kernel.
>>>
>> This is what I believe as well, but another person believes otherwise
>> at slax forum. Slax has crippled kernel sources(not full) does that
>> make a difference?
>>
>> http://www.slax.org/forum.php?action=view&parentID=39934
>>
>> Thread is at above link. Anyone can post as guest after verifying a CAPTCHA
>>>
>>>
>>> All,
>>>
>>> BTW the presence of the two functions snd_hda_codec_{read,write}() in the
>>> HDA.c
>>> file makes the HDA.c file a GPL code. Am I correct?
>>
>> I am not too sure of that, hope Marv or someone else can clarify this.
>>
>>
>> Regards,
>>
>> Antonio
>>>
>>> --
>>> WBR, Nikolay Zhuravlev
>>>
>>>
>>
>
