Daniel This is a step forward (below), that is the test without the sl-modem-daemon installed. Please continue that way, as sl-modem-daemon provides no additional functionality and may complicate issues for modems working through the snd-hda-intel driver. Between succcessive tests, please do a # killall slmodemd and then start again with the slmodemd command Get some more detail on the failure by activating with: # slmodemd -c CANADA --alsa --log --debug=2 hw:0,6 Do the wvdial attempt again in the 2nd console. Send us the logfile after the failure. MarvS root@daniel-laptop:/home/daniel# slmodemd -c CANADA --alsa hw:0,6 SmartLink Soft Modem: version 2.9.11 Mar 6 2009 00:36:34 symbolic link `/dev/ttySL0' -> `/dev/pts/0' created. modem `hw:0,6' created. TTY is `/dev/pts/0' Use `/dev/ttySL0' as modem device, Ctrl+C for termination. ------In a 2nd console------------ daniel@daniel-laptop:~$ sudo su [sudo] password for daniel: root@daniel-laptop:/home/daniel# nano /etc/wvdial.conf - Hide quoted text - root@daniel-laptop:/home/daniel# wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 OK --> Modem initialized. --> Sending: ATDT8314040 --> Waiting for carrier. ATDT8314040 --> Timed out while dialing. Trying again. --> Sending: ATDT8314040 --> Waiting for carrier. --> Timed out while dialing. Trying again. --> Sending: ATDT8314040 --> Waiting for carrier. On Sun, May 17, 2009 at 9:20 AM, Daniel Miguel <danielmp84@xxxxxxxxx> wrote: > Hello > > when I uninstalled sl-modem-daemon, gave me several errors (like > ipppd) and without sl-modem-daemon ,slmodemd does not work > > here i go: > > daniel@daniel-laptop:~$ sudo su > [sudo] password for daniel: > root@daniel-laptop:/home/daniel# aptitude search sl-modem-daemon > i sl-modem-daemon - SmartLink software modem daemon > root@daniel-laptop:/home/daniel# apt-get remove sl-modem-daemon > Leyendo lista de paquetes... Hecho > Creando árbol de dependencias > Leyendo la información de estado... Hecho > Los siguientes paquetes se ELIMINARà N: > sl-modem-daemon > 0 actualizados, 0 se instalarán, 1 para eliminar y 0 no actualizados. > 1 no instalados del todo o eliminados. > Se liberarán 1147kB después de esta operación. > ¿Desea continuar [S/n]? S > (Leyendo la base de datos ... > 104621 ficheros y directorios instalados actualmente.) > Desinstalando sl-modem-daemon ... > Shutting down SmartLink Modem driver normally. > Unloading modem driver from kernel ... none found. > Procesando disparadores para man-db ... > Configurando ipppd (1:3.12.20071127-0ubuntu5) ... > Note: running MAKEDEV to create ISDN devices in /dev... > /var/lib/dpkg/info/ipppd.postinst: 112: ./MAKEDEV: not found > dpkg: error al procesar ipppd (--configure): > el subproceso post-installation script devolvió el código de salida > de error 127 > Se encontraron errores al procesar: > ipppd > E: Sub-process /usr/bin/dpkg returned an error code (1) > root@daniel-laptop:/home/daniel# aptitude search sl-modem-daemon > c sl-modem-daemon - SmartLink software modem daemon > root@daniel-laptop:/home/daniel# slmodem -c CANADA --alsa hw:0,6 > bash: slmodem: orden no encontrada > root@daniel-laptop:/home/daniel# apt-get install sl-modem-daemon > Leyendo lista de paquetes... Hecho > Creando árbol de dependencias > Leyendo la información de estado... Hecho > Se instalarán los siguientes paquetes NUEVOS: > sl-modem-daemon > 0 actualizados, 1 se instalarán, 0 para eliminar y 0 no actualizados. > 1 no instalados del todo o eliminados. > Se necesita descargar 0B/514kB de archivos. > Se utilizarán 1147kB de espacio de disco adicional después de esta operación. > Preconfigurando paquetes ... > Seleccionando el paquete sl-modem-daemon previamente no seleccionado. > (Leyendo la base de datos ... > 104615 ficheros y directorios instalados actualmente.) > Desempaquetando sl-modem-daemon (de > .../sl-modem-daemon_2.9.11~20080817-3ubuntu2_i386.deb) ... > Procesando disparadores para man-db ... > Configurando ipppd (1:3.12.20071127-0ubuntu5) ... > Note: running MAKEDEV to create ISDN devices in /dev... > /var/lib/dpkg/info/ipppd.postinst: 112: ./MAKEDEV: not found > dpkg: error al procesar ipppd (--configure): > el subproceso post-installation script devolvió el código de salida > de error 127 > Configurando sl-modem-daemon (2.9.11~20080817-3ubuntu2) ... > Ya existe el usuario del sistema `Slmodemd'. Saliendo. > SmartLink modem driver not available for this Kernel. Please read README.Debian > or try to install the package sl-modem-modules-2.6.28-11-generic. Exiting... > invoke-rc.d: initscript sl-modem-daemon, action "start" failed. > > Se encontraron errores al procesar: > ipppd > E: Sub-process /usr/bin/dpkg returned an error code (1) > root@daniel-laptop:/home/daniel# slmodemd -c CANADA --alsa hw:0,6 > SmartLink Soft Modem: version 2.9.11 Mar 6 2009 00:36:34 > symbolic link `/dev/ttySL0' -> `/dev/pts/0' created. > modem `hw:0,6' created. TTY is `/dev/pts/0' > Use `/dev/ttySL0' as modem device, Ctrl+C for termination. > > ------In a 2nd console------------ > daniel@daniel-laptop:~$ sudo su > [sudo] password for daniel: > root@daniel-laptop:/home/daniel# nano /etc/wvdial.conf > root@daniel-laptop:/home/daniel# wvdial > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 > ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 > OK > --> Modem initialized. > --> Sending: ATDT8314040 > --> Waiting for carrier. > ATDT8314040 > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > --> Sending: ATDT8314040 > --> Waiting for carrier. > --> Timed out while dialing. Trying again. > ^CCaught signal 2: Attempting to exit gracefully... > --> Disconnecting at Sun May 17 04:58:39 2009 > root@daniel-laptop:/home/daniel# > > ---------then Ctrl + C------------------ > > > ^Croot@daniel-laptop:/home/daniel# wvdial > --> WvDial: Internet dialer version 1.60 > --> Cannot open /dev/ttySL0: No such file or directory > --> Cannot open /dev/ttySL0: No such file or directory > --> Cannot open /dev/ttySL0: No such file or directory > root@daniel-laptop:/home/daniel# ls -l /dev|grep ttyS > lrwxrwxrwx 1 root root 6 2009-05-17 04:49 modem -> ttySL0 > crw-rw---- 1 root dialout 4, 64 2009-05-17 00:49 ttyS0 > crw-rw---- 1 root dialout 4, 65 2009-05-17 00:49 ttyS1 > crw-rw---- 1 root dialout 4, 66 2009-05-17 00:49 ttyS2 > crw-rw---- 1 root dialout 4, 67 2009-05-17 00:49 ttyS3 > lrwxrwxrwx 1 root root 10 2009-05-17 04:55 ttySL0 -> /dev/pts/0 > root@daniel-laptop:/home/daniel# > > > > Thanks > > > > > > On Sat, May 16, 2009 at 11:51 PM, Marvin Stodolsky > <marvin.stodolsky@xxxxxxxxx> wrote: >> Daniel, >> >> Have you installed the sl-modem-daemon package? >> That would account for the /dev/ttySL0 ---> /dev/pts/N >> and a failure >> # slmodemd -c CANADA --alsa hw:0,6 >> error: alsa setup: cannot open playback device 'hw:0,6': Device or >> resource busy. >> ----- >> Just in case do: >> $ sudo apt-get remove sl-modem-daemon >> as this function is NOT necessary for support through the snd-hda-intel driver >> >> Incidentally under Ubuntu do: >> $ sudo slmodemd -c CANADA --alsa hw:0,6 >> Then open a 2nd console of TAB for >> $ sudo wvdial >> >> Try initially without Stupid Mode >> >> MarvS >> >> >> >> >> >> >> On Sat, May 16, 2009 at 11:29 PM, Daniel Miguel <danielmp84@xxxxxxxxx> wrote: >>> Hello >>> >>> just after restart the computer in a terminal i did the following: >>> >>> daniel@daniel-laptop:~$ sudo su >>> [sudo] password for daniel: >>> root@daniel-laptop:/home/daniel# modprobe -r snd-hda-intel >>> FATAL: Module snd_hda_intel is in use. >>> root@daniel-laptop:/home/daniel# modprobe snd-hda-intel >>> root@daniel-laptop:/home/daniel# slmodemd -c CANADA --alsa hw:0,6 >>> error: alsa setup: cannot open playback device 'hw:0,6': Device or resource busy >>> error: cannot setup device `hw:0,6' >>> root@daniel-laptop:/home/daniel# nano /etc/wvdial.conf >>> >>> >>> -------wvdial.conf------------- >>> [Dialer Defaults] >>> Init1 = ATZ >>> Init2 = ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>> Modem Type = Analog Modem >>> ISDN = 0 >>> Phone = a_phone_number >>> New PPPD = yes >>> Modem = /dev/ttySL0 >>> Username = my_username >>> Password = my_password >>> Baud = 460800 >>> Carrier Check=no >>> Stupid Mode = yes >>> ----------------------------- >>> root@daniel-laptop:/home/daniel# wvdial >>> --> WvDial: Internet dialer version 1.60 >>> --> Cannot get information for serial port. >>> --> Initializing modem. >>> --> Sending: ATZ >>> ATZ >>> OK >>> --> Sending: ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>> ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>> OK >>> --> Modem initialized. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> ATDT8314040 >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> --> Sending: ATDT8314040 >>> --> Waiting for carrier. >>> --> Timed out while dialing. Trying again. >>> ^CCaught signal 2: Attempting to exit gracefully... >>> --> Disconnecting at Sat May 16 19:16:06 2009 >>> root@daniel-laptop:/home/daniel# slmodemd -c CANADA --alsa hw:0,6 >>> error: alsa setup: cannot open playback device 'hw:0,6': Device or resource busy >>> error: cannot setup device `hw:0,6' >>> root@daniel-laptop:/home/daniel# wvdial >>> --> WvDial: Internet dialer version 1.60 >>> --> Cannot get information for serial port. >>> --> Initializing modem. >>> --> Sending: ATZ >>> --> Sending: ATQ0 >>> --> Re-Sending: ATZ >>> --> Modem not responding. >>> root@daniel-laptop:/home/daniel# wvdial >>> --> WvDial: Internet dialer version 1.60 >>> --> Cannot get information for serial port. >>> --> Initializing modem. >>> --> Sending: ATZ >>> --> Sending: ATQ0 >>> --> Re-Sending: ATZ >>> --> Modem not responding. >>> root@daniel-laptop:/home/daniel# >>> >>> Daniel >>> >>> >>> >>> On Sat, May 16, 2009 at 9:37 PM, Antonio Olivares >>> <olivares14031@xxxxxxxxx> wrote: >>>> Daniel, >>>> >>>> Before you try to dialout can you do the following: >>>> >>>> $ sudo modprobe -r snd-hda-intel >>>> $ sudo modprobe snd-hda-intel >>>> $ sudo slmodemd -c CANADA --alsa hw:0,6 >>>> >>>> Leave that running as it should say that slmodemd is running CTRL+C to >>>> quit, fire up another terminal >>>> >>>> then modify your /etc/wvdial.conf >>>> $ sudo gedit /etc/wvdial.conf >>>> >>>> Change Init2 from what you have [Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 >>>> +FCLASS=0] to Init2 = ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>> add a line Stupid Mode = yes >>>> >>>> [Dialer Defaults] >>>> Init1 = ATZ >>>> Init2 = ATQ0 V1 E1 X3 S0=0 &C1 &D2 +MS=90 >>>> Modem Type = Analog Modem >>>> ISDN = 0 >>>> Phone = a_phone_number >>>> New PPPD = yes >>>> Modem = /dev/ttySL0 >>>> Username = my_username >>>> Password = my_password >>>> Baud = 460800 >>>> Carrier Check=no >>>> Stupid Mode = yes >>>> >>>> Report back. When redialing press CTRL+C on the running slmodemd and >>>> do the $ sudo slmodemd -c CANADA --alsa hw:0,6 >>>> >>>> Regards, >>>> >>>> Antonio >>>> >>>> >>>> On Sat, May 16, 2009 at 8:21 PM, Daniel Miguel <danielmp84@xxxxxxxxx> wrote: >>>>> Hi >>>>> >>>>> When i reboot i did the following: >>>>> >>>>> daniel@daniel-laptop:~$ sudo su >>>>> [sudo] password for daniel: >>>>> root@daniel-laptop:/home/daniel# ls -l /dev/ttySL0 /dev/pt >>>>> ptmx pts/ >>>>> root@daniel-laptop:/home/daniel# ls -l /dev/ttySL0 /dev/pts/* >>>>> crw-rw---- 1 root dialout 136, 0 2009-05-16 16:45 /dev/pts/0 >>>>> crw--w---- 1 daniel tty 136, 1 2009-05-16 16:47 /dev/pts/1 >>>>> lrwxrwxrwx 1 root root 10 2009-05-16 16:45 /dev/ttySL0 -> /dev/pts/0 >>>>> root@daniel-laptop:/home/daniel# >>>>> root@daniel-laptop:/home/daniel# slmodemd -c CANADA --alsa hw:0,6 >>>>> error: alsa setup: cannot open playback device 'hw:0,6': Device or resource busy >>>>> error: cannot setup device `hw:0,6' >>>>> root@daniel-laptop:/home/daniel# wvdialconf >>>>> Editing `/etc/wvdial.conf'. >>>>> >>>>> Scanning your serial ports for a modem. >>>>> >>>>> Modem Port Scan<*1>: S0 S1 S2 S3 >>>>> WvModem<*1>: Cannot get information for serial port. >>>>> ttySL0<*1>: ATQ0 V1 E1 -- OK >>>>> ttySL0<*1>: ATQ0 V1 E1 Z -- OK >>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK >>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK >>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>> ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem >>>>> ttySL0<*1>: Speed 4800: AT -- OK >>>>> ttySL0<*1>: Speed 9600: AT -- OK >>>>> ttySL0<*1>: Speed 19200: AT -- OK >>>>> ttySL0<*1>: Speed 38400: AT -- OK >>>>> ttySL0<*1>: Speed 57600: AT -- OK >>>>> ttySL0<*1>: Speed 115200: AT -- OK >>>>> ttySL0<*1>: Speed 230400: AT -- OK >>>>> ttySL0<*1>: Speed 460800: AT -- OK >>>>> ttySL0<*1>: Max speed is 460800; that should be safe. >>>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>> >>>>> Found a modem on /dev/ttySL0. >>>>> Modem configuration written to /etc/wvdial.conf. >>>>> ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" >>>>> root@daniel-laptop:/home/daniel# nano /etc/wvdial.conf >>>>> >>>>> ---------------------------/etc/wvdial.conf------------------------- >>>>> [Dialer Defaults] >>>>> Init1 = ATZ >>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>> Modem Type = Analog Modem >>>>> ISDN = 0 >>>>> Phone = a_phone_number >>>>> New PPPD = yes >>>>> Modem = /dev/ttySL0 >>>>> Username = my_username >>>>> Password = my_password >>>>> Baud = 460800 >>>>> Carrier Check=no >>>>> -------------------------------------------------------------------------- >>>>> >>>>> root@daniel-laptop:/home/daniel# wvdial >>>>> --> WvDial: Internet dialer version 1.60 >>>>> --> Cannot get information for serial port. >>>>> --> Initializing modem. >>>>> --> Sending: ATZ >>>>> ATZ >>>>> OK >>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>> OK >>>>> --> Modem initialized. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> ATDT8314040 >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> --> Sending: ATDT8314040 >>>>> --> Waiting for carrier. >>>>> --> Timed out while dialing. Trying again. >>>>> ^CCaught signal 2: Attempting to exit gracefully... >>>>> --> Disconnecting at Sat May 16 16:55:37 2009 >>>>> root@daniel-laptop:/home/daniel# wvdial >>>>> --> WvDial: Internet dialer version 1.60 >>>>> --> Cannot get information for serial port. >>>>> --> Initializing modem. >>>>> --> Sending: ATZ >>>>> --> Sending: ATQ0 >>>>> --> Re-Sending: ATZ >>>>> --> Modem not responding. >>>>> root@daniel-laptop:/home/daniel# >>>>> >>>>> Daniel >>>>> >>>>> >>>>> >>>>> On Sat, May 16, 2009 at 5:34 PM, Marvin Stodolsky >>>>> <marvin.stodolsky@xxxxxxxxx> wrote: >>>>>> Daniel, >>>>>> >>>>>> When you reboot, the first thing to do is: >>>>>> $ ls -l /dev/ttySL0 /dev/pts/* >>>>>> which is not expected to as yet report /dev/ttySL0 >>>>>> >>>>>> $ sudo slmodemd -c CANADA --alsa hw:0,6 >>>>>> should set up the modem and create a /dev/ttySL0 --> /dev/pts/SomeN >>>>>> >>>>>> Leave slmodemd running, and open another console or TAB on the same one. >>>>>> Therein: >>>>>> $ sudo wvdialconf >>>>>> should report finding the modem. >>>>>> >>>>>> If so: >>>>>> $ sudo gedit /etc/wvdial.conf >>>>>> removing the symbols ; < > >>>>>> adding in your personal info >>>>>> and adding two lines: >>>>>> Carrier Check = no >>>>>> # necessary with /dev/pts/N ports >>>>>> >>>>>> Then try a dialout with: >>>>>> $ sudo wvdial >>>>>> report back presently >>>>>> >>>>>> MarvS >>>>>> scanModem maintainer >>>>>> >>>>>> >>>>>> On Sat, May 16, 2009 at 4:58 PM, Daniel Miguel <danielmp84@xxxxxxxxx> wrote: >>>>>>> Hello: >>>>>>> >>>>>>> I have problems with my modem and i need help >>>>>>> >>>>>>> I have a toshiba A105 -S2101 with Ubuntu 9.04 and my modem does not work >>>>>>> >>>>>>> I ran the scanmodem and the information is in the attached file >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> when I write this does not connect and comes in an infinite loop >>>>>>> >>>>>>> >>>>>>> >>>>>>> root@daniel-laptop:/# wvdial >>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>> --> Cannot get information for serial port. >>>>>>> --> Initializing modem. >>>>>>> --> Sending: ATZ >>>>>>> ATZ >>>>>>> OK >>>>>>> --> Modem initialized. >>>>>>> --> Sending: ATDT8314040 >>>>>>> --> Waiting for carrier. >>>>>>> ATDT8314040 >>>>>>> --> Timed out while dialing. Trying again. >>>>>>> --> Sending: ATDT8314040 >>>>>>> --> Waiting for carrier. >>>>>>> --> Timed out while dialing. Trying again. >>>>>>> --> Sending: ATDT8314040 >>>>>>> --> Waiting for carrier. >>>>>>> --> Timed out while dialing. Trying again. >>>>>>> --> Sending: ATDT8314040 >>>>>>> --> Waiting for carrier. >>>>>>> --> Timed out while dialing. Trying again. >>>>>>> --> Sending: ATDT8314040 >>>>>>> --> Waiting for carrier. >>>>>>> --> Timed out while dialing. Trying again. >>>>>>> --> Sending: ATDT8314040 >>>>>>> --> Waiting for carrier. >>>>>>> --> Timed out while dialing. Trying again. >>>>>>> --> Sending: ATDT8314040 >>>>>>> --> Waiting for carrier. >>>>>>> --> Timed out while dialing. Trying again. >>>>>>> --> Sending: ATDT8314040 >>>>>>> --> Waiting for carrier. >>>>>>> --> Timed out while dialing. Trying again. >>>>>>> --> Sending: ATDT8314040 >>>>>>> --> Waiting for carrier. >>>>>>> --> Timed out while dialing. Trying again. >>>>>>> --> Sending: ATDT8314040 >>>>>>> --> Waiting for carrier. >>>>>>> --> Timed out while dialing. Trying again. >>>>>>> ^CCaught signal 2: Attempting to exit gracefully... >>>>>>> --> Disconnecting at Sat May 16 12:25:31 2009 >>>>>>> root@daniel-laptop:/# wvdial >>>>>>> >>>>>>> >>>>>>> >>>>>>> Then when i write again wvdial the modem does not respond never until >>>>>>> i restart the laptop and spends the same >>>>>>> >>>>>>> root@daniel-laptop:/# wvdial >>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>> --> Cannot get information for serial port. >>>>>>> --> Initializing modem. >>>>>>> --> Sending: ATZ >>>>>>> --> Sending: ATQ0 >>>>>>> --> Re-Sending: ATZ >>>>>>> --> Modem not responding. >>>>>>> root@daniel-laptop:/# >>>>>>> >>>>>>> More info >>>>>>> >>>>>>> root@daniel-laptop:/# slmodemd -c CANADA --alsa hw:0,6 >>>>>>> error: alsa setup: cannot open playback device 'hw:0,6': Device or resource busy >>>>>>> error: cannot setup device `hw:0,6' >>>>>>> root@daniel-laptop:/# >>>>>>> >>>>>>> >>>>>>> root@daniel-laptop:/# ls -al /dev|grep ttyS ;ls -al /dev/pts >>>>>>> lrwxrwxrwx 1 root root 6 2009-05-16 12:21 modem -> ttySL0 >>>>>>> crw-rw---- 1 root dialout 4, 64 2009-05-16 08:21 ttyS0 >>>>>>> crw-rw---- 1 root dialout 4, 65 2009-05-16 08:21 ttyS1 >>>>>>> crw-rw---- 1 root dialout 4, 66 2009-05-16 08:21 ttyS2 >>>>>>> crw-rw---- 1 root dialout 4, 67 2009-05-16 08:21 ttyS3 >>>>>>> lrwxrwxrwx 1 root root 10 2009-05-16 12:21 ttySL0 -> /dev/pts/0 >>>>>>> total 0 >>>>>>> drwxr-xr-x 2 root root 0 2009-05-16 08:21 . >>>>>>> drwxr-xr-x 16 root root 3880 2009-05-16 12:21 .. >>>>>>> crw-rw---- 1 root dialout 136, 0 2009-05-16 12:27 0 >>>>>>> crw--w---- 1 daniel tty 136, 1 2009-05-16 12:32 1 >>>>>>> root@daniel-laptop:/# >>>>>>> >>>>>>> Thanks >>>>>>> >>>>>> >>>>> >>>> >>> >> >
