Once again I am here because my problem is still there.
My details.
I recently install ubuntu 8.10 and also new to Linux.
System : Dual boot Ubuntu 8.10 and Windows XP
Modem: Motorola SM56 Data Fax Modem
I already use this modem in windows XP Only for net usage.
Now I want dialup connection not only in XP also in My ubuntu.
I download scanModem.gz and scan my modem
As seen in modemdata.txt I download slamr-2.6.27-7-generic.tar.gz
As instructions I try to unzip the file as
# Tar zxvf slamr*.tar.gz
But got an error message
Says that ' Not in gzip format '.
How this happened?
I am totally confused
Excuse me all, as a new comer in linux
I wants step by step procedure.
Please help me. Thanks in advance.
Now my dmesg.txt and modemdata.txt
dmesg.txt
CPU0
0: 146 IO-APIC-edge timer
1: 460 IO-APIC-edge i8042
3: 2 IO-APIC-edge
4: 2 IO-APIC-edge
7: 0 IO-APIC-edge parport0
8: 2 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
12: 28659 IO-APIC-edge i8042
14: 31083 IO-APIC-edge pata_via
15: 9215 IO-APIC-edge pata_via
21: 3882 IO-APIC-fasteoi uhci_hcd:usb1, uhci_hcd:usb2,
uhci_hcd:usb3, uhci_hcd:usb4, ehci_hcd:usb5
22: 1247 IO-APIC-fasteoi VIA8237
23: 0 IO-APIC-fasteoi eth0
NMI: 0 Non-maskable interrupts
LOC: 59738 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc
version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44
UTC 2008 (Ubuntu 2.6.27-7.14-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bff0000 (usable)
[ 0.000000] BIOS-e820: 000000001bff0000 - 000000001bff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bff3000 - 000000001c000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0x1bff0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 1bff0000 @ 7000-d000
[ 0.000000] RAMDISK: 1b816000 - 1bfdfd6f
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F6D90, 0014 (r0 KM400 )
[ 0.000000] ACPI: RSDT 1BFF3000, 002C (r1 KM400 AWRDACPI 42302E31
AWRD 0)
[ 0.000000] ACPI: FACP 1BFF3040, 0074 (r1 KM400 AWRDACPI 42302E31
AWRD 0)
[ 0.000000] ACPI: DSDT 1BFF30C0, 4E67 (r1 KM400 AWRDACPI 1000
MSFT 100000E)
[ 0.000000] ACPI: FACS 1BFF0000, 0040
[ 0.000000] ACPI: APIC 1BFF7F40, 005A (r1 KM400 AWRDACPI 42302E31
AWRD 0)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1bff0000
[ 0.000000] low ram: 00000000 - 1bff0000
[ 0.000000] bootmap 00002000 - 00005800
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001bff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==>
[0000100000 - 00005c0a20]
[ 0.000000] #4 [001b816000 - 001bfdfd6f] RAMDISK ==>
[001b816000 - 001bfdfd6f]
[ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==>
[00005c1000 - 00005c4000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==>
[0000007000 - 0000009000]
[ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==>
[0000002000 - 0000006000]
[ 0.000000] found SMP MP-table at [c00f52e0] 000f52e0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001bff0
[ 0.000000] HighMem 0x0001bff0 -> 0x0001bff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001bff0
[ 0.000000] On node 0 totalpages: 114575
[ 0.000000] free_area_init_node: node 0, pgdat c048a500,
node_mem_map c1000000
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 109604 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
1c000000:e2c00000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 113567
[ 0.000000] Kernel command line:
root=UUID=ff5742d0-cc8c-467b-9002-5a6fb05c79fb ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 1666.435 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 440644k/458688k available (2572k kernel code,
17376k reserved, 1160k data, 424k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xdc800000 - 0xff3fe000 ( 555 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdbff0000 ( 447 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.004018] Calibrating delay loop (skipped), value calculated
using timer frequency.. 3332.87 BogoMIPS (lpj=6665740)
[ 0.004050] Security Framework initialized
[ 0.004060] SELinux: Disabled at boot.
[ 0.004098] AppArmor: AppArmor initialized
[ 0.004111] Mount-cache hash table entries: 512
[ 0.004347] Initializing cgroup subsys ns
[ 0.004354] Initializing cgroup subsys cpuacct
[ 0.004358] Initializing cgroup subsys memory
[ 0.004379] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004383] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.004401] Checking 'hlt' instruction... OK.
[ 0.020388] SMP alternatives: switching to UP code
[ 0.026820] Freeing SMP alternatives: 11k freed
[ 0.026827] ACPI: Core revision 20080609
[ 0.029977] ACPI: Checking initramfs for custom DSDT
[ 0.432735] ENABLING IO-APIC IRQs
[ 0.433060] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.472771] CPU0: AMD Athlon(tm) stepping 01
[ 0.476029] Brought up 1 CPUs
[ 0.476029] Total of 1 processors activated (3332.87 BogoMIPS).
[ 0.476029] CPU0 attaching sched-domain:
[ 0.476029] domain 0: span 0 level CPU
[ 0.476029] groups: 0
[ 0.476029] net_namespace: 840 bytes
[ 0.476029] Booting paravirtualized kernel on bare hardware
[ 0.476029] Time: 10:50:34 Date: 05/01/09
[ 0.476029] NET: Registered protocol family 16
[ 0.476029] EISA bus registered
[ 0.476029] ACPI: bus type pci registered
[ 0.481231] PCI: PCI BIOS revision 2.10 entry at 0xfbaf0, last bus=1
[ 0.481235] PCI: Using configuration type 1 for base access
[ 0.483637] ACPI: EC: Look up EC in DSDT
[ 0.494178] ACPI: Interpreter enabled
[ 0.494190] ACPI: (supports S0 S1 S4 S5)
[ 0.494217] ACPI: Using IOAPIC for interrupt routing
[ 0.506002] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.506133] PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, e7ffffff]
[ 0.506204] pci 0000:00:01.0: supports D1
[ 0.506235] PCI: 0000:00:05.0 reg 10 32bit mmio: [ee000000, ee000fff]
[ 0.506243] PCI: 0000:00:05.0 reg 14 io port: [e000, e0ff]
[ 0.506278] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.506283] pci 0000:00:05.0: PME# disabled
[ 0.506333] PCI: 0000:00:0f.0 reg 20 io port: [e100, e10f]
[ 0.506391] PCI: 0000:00:10.0 reg 20 io port: [e200, e21f]
[ 0.506411] pci 0000:00:10.0: supports D1
[ 0.506413] pci 0000:00:10.0: supports D2
[ 0.506416] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.506421] pci 0000:00:10.0: PME# disabled
[ 0.506459] PCI: 0000:00:10.1 reg 20 io port: [e300, e31f]
[ 0.506479] pci 0000:00:10.1: supports D1
[ 0.506481] pci 0000:00:10.1: supports D2
[ 0.506484] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.506489] pci 0000:00:10.1: PME# disabled
[ 0.506527] PCI: 0000:00:10.2 reg 20 io port: [e400, e41f]
[ 0.506546] pci 0000:00:10.2: supports D1
[ 0.506549] pci 0000:00:10.2: supports D2
[ 0.506552] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.506556] pci 0000:00:10.2: PME# disabled
[ 0.506594] PCI: 0000:00:10.3 reg 20 io port: [e500, e51f]
[ 0.506614] pci 0000:00:10.3: supports D1
[ 0.506616] pci 0000:00:10.3: supports D2
[ 0.506619] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.506624] pci 0000:00:10.3: PME# disabled
[ 0.506648] PCI: 0000:00:10.4 reg 10 32bit mmio: [ee001000, ee0010ff]
[ 0.506682] pci 0000:00:10.4: supports D1
[ 0.506685] pci 0000:00:10.4: supports D2
[ 0.506687] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.506692] pci 0000:00:10.4: PME# disabled
[ 0.506750] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.506788] PCI: 0000:00:11.5 reg 10 io port: [e600, e6ff]
[ 0.506823] pci 0000:00:11.5: supports D1
[ 0.506826] pci 0000:00:11.5: supports D2
[ 0.506853] PCI: 0000:00:12.0 reg 10 io port: [e700, e7ff]
[ 0.506860] PCI: 0000:00:12.0 reg 14 32bit mmio: [ee002000, ee0020ff]
[ 0.506891] pci 0000:00:12.0: supports D1
[ 0.506894] pci 0000:00:12.0: supports D2
[ 0.506897] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.506902] pci 0000:00:12.0: PME# disabled
[ 0.506945] PCI: 0000:01:00.0 reg 10 32bit mmio: [e8000000, ebffffff]
[ 0.506952] PCI: 0000:01:00.0 reg 14 32bit mmio: [ec000000, ecffffff]
[ 0.506970] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, ffff]
[ 0.506982] pci 0000:01:00.0: supports D1
[ 0.506984] pci 0000:01:00.0: supports D2
[ 0.507015] PCI: bridge 0000:00:01.0 32bit mmio: [ec000000, edffffff]
[ 0.507020] PCI: bridge 0000:00:01.0 32bit mmio pref: [e8000000, ebffffff]
[ 0.507028] bus 00 -> node 0
[ 0.507039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.554798] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 0.555109] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 0.555423] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 0.555699] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12)
*0, disabled.
[ 0.555971] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12)
*0, disabled.
[ 0.556254] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12)
*0, disabled.
[ 0.556518] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12)
*0, disabled.
[ 0.556780] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12)
*0, disabled.
[ 0.557110] ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled.
[ 0.557419] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[ 0.557727] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[ 0.558085] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[ 0.558331] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.558392] pnp: PnP ACPI init
[ 0.558406] ACPI: bus type pnp registered
[ 0.566043] pnp: PnP ACPI: found 14 devices
[ 0.566048] ACPI: ACPI bus type pnp unregistered
[ 0.566054] PnPBIOS: Disabled by ACPI PNP
[ 0.566716] PCI: Using ACPI for IRQ routing
[ 0.566890] NET: Registered protocol family 8
[ 0.566890] NET: Registered protocol family 20
[ 0.566890] NetLabel: Initializing
[ 0.566890] NetLabel: domain hash size = 128
[ 0.566890] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.566890] NetLabel: unlabeled traffic allowed by default
[ 0.566890] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.566890] actual entries 65620
[ 0.566890] AppArmor: AppArmor Filesystem Enabled
[ 0.566890] ACPI: RTC can wake from S4
[ 0.566890] system 00:00: iomem range 0xc7e00-0xc7fff has been reserved
[ 0.566890] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.566890] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.566890] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.566890] system 00:00: iomem range 0x1bff0000-0x1bffffff could
not be reserved
[ 0.566890] system 00:00: iomem range 0xffff0000-0xffffffff could
not be reserved
[ 0.566890] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.566890] system 00:00: iomem range 0x100000-0x1bfeffff could not
be reserved
[ 0.566890] system 00:00: iomem range 0xfec00000-0xfec00fff could
not be reserved
[ 0.566890] system 00:00: iomem range 0xfee00000-0xfee00fff could
not be reserved
[ 0.566890] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.566890] system 00:02: ioport range 0x4000-0x407f has been reserved
[ 0.566890] system 00:02: ioport range 0x5000-0x500f has been reserved
[ 0.566890] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.566890] system 00:03: ioport range 0x294-0x297 has been reserved
[ 0.603479] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.603483] pci 0000:00:01.0: IO window: disabled
[ 0.603490] pci 0000:00:01.0: MEM window: 0xec000000-0xedffffff
[ 0.603496] pci 0000:00:01.0: PREFETCH window:
0x000000e8000000-0x000000ebffffff
[ 0.603514] pci 0000:00:01.0: setting latency timer to 64
[ 0.603519] bus: 00 index 0 io port: [0, ffff]
[ 0.603522] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.603525] bus: 01 index 0 mmio: [0, 0]
[ 0.603528] bus: 01 index 1 mmio: [ec000000, edffffff]
[ 0.603531] bus: 01 index 2 mmio: [e8000000, ebffffff]
[ 0.603533] bus: 01 index 3 mmio: [0, 0]
[ 0.603554] NET: Registered protocol family 2
[ 0.603758] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.604111] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.604360] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.604611] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.604616] TCP reno registered
[ 0.604784] NET: Registered protocol family 1
[ 0.604992] checking if image is initramfs... it is
[ 1.104106] Switched to high resolution mode on CPU 0
[ 1.484457] Freeing initrd memory: 7975k freed
[ 1.485831] audit: initializing netlink socket (disabled)
[ 1.485858] type=2000 audit(1241175034.484:1): initialized
[ 1.492943] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.496747] VFS: Disk quotas dquot_6.5.1
[ 1.496918] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.497101] msgmni has been set to 876
[ 1.497315] io scheduler noop registered
[ 1.497319] io scheduler anticipatory registered
[ 1.497322] io scheduler deadline registered
[ 1.497340] io scheduler cfq registered (default)
[ 1.497359] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.497442] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[ 1.497455] pci 0000:01:00.0: Boot video device
[ 1.498005] isapnp: Scanning for PnP cards...
[ 1.851572] isapnp: No Plug & Play device found
[ 1.918682] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.918850] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.919095] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.920448] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.921154] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.921453] serial 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.922389] 0000:00:05.0: ttyS2 at I/O 0xe008 (irq = 16) is a 16450
[ 1.922918] 0000:00:05.0: ttyS3 at I/O 0xe010 (irq = 16) is a 8250
[ 1.923065] Couldn't register serial port 0000:00:05.0: -28
[ 1.925797] brd: module loaded
[ 1.925929] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 1.926142] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.926649] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.926660] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.927556] mice: PS/2 mouse device common for all mice
[ 1.927805] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.927848] rtc0: alarms up to one year, y3k
[ 1.928079] EISA: Probing bus 0 at eisa.0
[ 1.928103] Cannot allocate resource for EISA slot 4
[ 1.928106] Cannot allocate resource for EISA slot 5
[ 1.928120] EISA: Detected 0 cards.
[ 1.928126] cpuidle: using governor ladder
[ 1.928129] cpuidle: using governor menu
[ 1.928876] TCP cubic registered
[ 1.928918] Using IPI No-Shortcut mode
[ 1.929323] registered taskstats version 1
[ 1.929465] Magic number: 9:912:829
[ 1.929631] tty ptyt9: hash matches
[ 1.929648] tty ptyqc: hash matches
[ 1.929761] rtc_cmos 00:05: setting system clock to 2009-05-01
10:50:36 UTC (1241175036)
[ 1.929766] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.929769] EDD information not available.
[ 1.930486] Freeing unused kernel memory: 424k freed
[ 1.930565] Write protecting the kernel text: 2576k
[ 1.930612] Write protecting the kernel read-only data: 936k
[ 1.958163] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 2.207842] fuse init (API version 7.9)
[ 2.232085] fan PNP0C0B:00: registered as cooling_device0
[ 2.232097] ACPI: Fan [FAN] (on)
[ 2.242300] processor ACPI0007:00: registered as cooling_device1
[ 2.246828] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.247946] ACPI: Thermal Zone [THRM] (49 C)
[ 3.093024] No dock devices found.
[ 3.167326] SCSI subsystem initialized
[ 3.328095] libata version 3.00 loaded.
[ 3.340601] usbcore: registered new interface driver usbfs
[ 3.340644] usbcore: registered new interface driver hub
[ 3.367993] usbcore: registered new device driver usb
[ 3.375557] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 3.375568] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 3.376109] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 3.376122] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI
23 (level, low) -> IRQ 23
[ 3.376536] eth0: VIA Rhine II at 0xee002000, 00:11:09:04:d9:f4, IRQ 23.
[ 3.377247] eth0: MII PHY found at address 1, status 0x7849
advertising 05e1 Link 0000.
[ 3.396717] pata_via 0000:00:0f.0: version 0.3.3
[ 3.397024] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
[ 3.397180] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 3.397193] pata_via 0000:00:0f.0: PCI INT A -> Link[ALKA] -> GSI
20 (level, low) -> IRQ 20
[ 3.402784] scsi0 : pata_via
[ 3.411799] scsi1 : pata_via
[ 3.414600] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe100 irq 14
[ 3.414606] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe108 irq 15
[ 3.417111] USB Universal Host Controller Interface driver v3.0
[ 3.584538] ata1.00: ATA-7: SAMSUNG SP0411N, TW100-11, max UDMA/100
[ 3.584546] ata1.00: 78242976 sectors, multi 16: LBA48
[ 3.584569] ata1.01: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.00, max UDMA/66
[ 3.592382] ata1.00: configured for UDMA/100
[ 3.608353] ata1.01: configured for UDMA/66
[ 3.956461] ata2.01: ATAPI: SONY CD-RW CRX230EE, 2YS8, max UDMA/33
[ 3.988334] ata2.01: configured for UDMA/33
[ 3.988556] scsi 0:0:0:0: Direct-Access ATA SAMSUNG
SP0411N TW10 PQ: 0 ANSI: 5
[ 3.989852] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-RAM
GH22NP20 1.00 PQ: 0 ANSI: 5
[ 3.990990] scsi 1:0:1:0: CD-ROM SONY CD-RW
CRX230EE 2YS8 PQ: 0 ANSI: 5
[ 3.991700] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 3.991715] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI
21 (level, low) -> IRQ 21
[ 3.991730] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 3.991810] uhci_hcd 0000:00:10.0: new USB bus registered, assigned
bus number 1
[ 3.991857] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e200
[ 3.992181] usb usb1: configuration #1 chosen from 1 choice
[ 3.992223] hub 1-0:1.0: USB hub found
[ 3.992239] hub 1-0:1.0: 2 ports detected
[ 4.200727] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI
21 (level, low) -> IRQ 21
[ 4.200746] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 4.200784] uhci_hcd 0000:00:10.1: new USB bus registered, assigned
bus number 2
[ 4.200815] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e300
[ 4.200972] usb usb2: configuration #1 chosen from 1 choice
[ 4.201020] hub 2-0:1.0: USB hub found
[ 4.201035] hub 2-0:1.0: 2 ports detected
[ 4.408435] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI
21 (level, low) -> IRQ 21
[ 4.408454] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 4.408495] uhci_hcd 0000:00:10.2: new USB bus registered, assigned
bus number 3
[ 4.408527] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e400
[ 4.408698] usb usb3: configuration #1 chosen from 1 choice
[ 4.408739] hub 3-0:1.0: USB hub found
[ 4.408755] hub 3-0:1.0: 2 ports detected
[ 4.616454] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI
21 (level, low) -> IRQ 21
[ 4.616475] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 4.616526] uhci_hcd 0000:00:10.3: new USB bus registered, assigned
bus number 4
[ 4.616559] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e500
[ 4.616724] usb usb4: configuration #1 chosen from 1 choice
[ 4.616764] hub 4-0:1.0: USB hub found
[ 4.616780] hub 4-0:1.0: 2 ports detected
[ 4.827244] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI
21 (level, low) -> IRQ 21
[ 4.827271] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 4.827351] ehci_hcd 0000:00:10.4: new USB bus registered, assigned
bus number 5
[ 4.827411] ehci_hcd 0000:00:10.4: irq 21, io mem 0xee001000
[ 4.836036] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[ 4.836340] usb usb5: configuration #1 chosen from 1 choice
[ 4.836395] hub 5-0:1.0: USB hub found
[ 4.836414] hub 5-0:1.0: 8 ports detected
[ 4.958074] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.958139] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 4.958201] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 5.078352] Driver 'sd' needs updating - please use bus_type methods
[ 5.081764] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[ 5.081800] sd 0:0:0:0: [sda] Write Protect is off
[ 5.081804] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.081849] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.081988] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[ 5.082013] sd 0:0:0:0: [sda] Write Protect is off
[ 5.082017] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.082059] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.082068] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 5.092682] sda1 sda2 < sda5 sda6 sda7 > sda3
[ 5.131388] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.140513] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 5.140522] Uniform CD-ROM driver Revision: 3.20
[ 5.140719] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 5.145893] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 5.146076] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 5.762666] PM: Starting manual resume from disk
[ 5.762674] PM: Resume from partition 8:6
[ 5.762677] PM: Checking hibernation image.
[ 5.762951] PM: Resume from disk failed.
[ 5.793944] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 5.793951] EXT3-fs: write access will be enabled during recovery.
[ 7.987046] kjournald starting. Commit interval 5 seconds
[ 7.987085] EXT3-fs: sda7: orphan cleanup on readonly fs
[ 7.987098] ext3_orphan_cleanup: deleting unreferenced inode 473663
[ 7.987189] ext3_orphan_cleanup: deleting unreferenced inode 322340
[ 7.987214] EXT3-fs: sda7: 2 orphan inodes deleted
[ 7.987218] EXT3-fs: recovery complete.
[ 8.054712] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.817059] udevd version 124 started
[ 15.872632] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.965307] Linux agpgart interface v0.103
[ 16.044448] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.120040] agpgart: Detected VIA KM400/KM400A chipset
[ 16.128558] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 16.610202] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 16.620089] ACPI: Power Button (FF) [PWRF]
[ 16.620331] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 16.636090] ACPI: Power Button (CM) [PWRB]
[ 16.636236] input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 16.652081] ACPI: Sleep Button (CM) [SLPB]
[ 17.309993] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 17.614505] parport_pc 00:0b: reported by Plug and Play ACPI
[ 17.614604] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 18.840475] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 18.840490] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] ->
GSI 22 (level, low) -> IRQ 22
[ 18.840648] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 20.021541] input: ImPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio1/input/input6
[ 23.825046] lp0: using parport0 (interrupt-driven).
[ 24.061487] Adding 9775512k swap on /dev/sda6. Priority:-1
extents:1 across:9775512k
[ 24.658320] EXT3 FS on sda7, internal journal
[ 25.819628] type=1505 audit(1241155260.177:2):
operation="profile_load" name="/usr/share/gdm/guest-session/Xsession"
name2="default" pid=3974
[ 26.122764] type=1505 audit(1241155260.481:3):
operation="profile_load" name="/usr/lib/cups/backend/cups-pdf"
name2="default" pid=3979
[ 26.123261] type=1505 audit(1241155260.481:4):
operation="profile_load" name="/usr/sbin/cupsd" name2="default"
pid=3979
[ 26.263826] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 26.680101] PPP generic driver version 2.4.2
[ 26.730684] NET: Registered protocol family 17
[ 28.254850] eth0: link down
[ 104.424984] ACPI: WMI: Mapper loaded
[ 105.749718] capifs: Rev 1.1.2.3
[ 105.871680] warning: `avahi-daemon' uses 32-bit capabilities
(legacy support in use)
[ 105.963727] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 105.963740] apm: overridden by ACPI.
[ 106.186323] ppdev: user-space parallel port driver
[ 114.969914] Bluetooth: Core ver 2.13
[ 114.972850] NET: Registered protocol family 31
[ 114.972862] Bluetooth: HCI device and connection manager initialized
[ 114.972868] Bluetooth: HCI socket layer initialized
[ 114.996830] Bluetooth: L2CAP ver 2.11
[ 114.996841] Bluetooth: L2CAP socket layer initialized
[ 115.018201] Bluetooth: SCO (Voice Link) ver 0.6
[ 115.018211] Bluetooth: SCO socket layer initialized
[ 115.045321] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 115.045332] Bluetooth: BNEP filters: protocol multicast
[ 115.084105] Bridge firewalling registered
[ 115.084802] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 115.166499] Bluetooth: RFCOMM socket layer initialized
[ 115.167016] Bluetooth: RFCOMM TTY layer initialized
[ 115.167026] Bluetooth: RFCOMM ver 1.10
[ 344.248019] usb 5-2: new high speed USB device using ehci_hcd and address 2
[ 344.407441] usb 5-2: configuration #1 chosen from 1 choice
[ 344.574032] usbcore: registered new interface driver libusual
[ 344.622813] Initializing USB Mass Storage driver...
[ 344.625943] scsi2 : SCSI emulation for USB Mass Storage devices
[ 344.627449] usbcore: registered new interface driver usb-storage
[ 344.628041] USB Mass Storage support registered.
[ 344.628558] usb-storage: device found at 2
[ 344.628566] usb-storage: waiting for device to settle before scanning
[ 349.628565] usb-storage: device scan complete
[ 349.629212] scsi 2:0:0:0: Direct-Access Motorola MSnc.
0101 PQ: 0 ANSI: 2
[ 349.629631] scsi 2:0:0:1: Direct-Access Motorola MSnc.
0101 PQ: 0 ANSI: 2
[ 349.640211] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 349.640953] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 349.646468] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 349.647224] sd 2:0:0:1: Attached scsi generic sg4 type 0
[ 356.650436] sd 2:0:0:0: [sdb] 1983493 512-byte hardware sectors (1016 MB)
[ 356.651921] sd 2:0:0:1: [sdc] 38374 512-byte hardware sectors (20 MB)
[ 356.653560] sd 2:0:0:0: [sdb] Write Protect is off
[ 356.653569] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 356.653573] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 356.656821] sd 2:0:0:1: [sdc] Write Protect is off
[ 356.656829] sd 2:0:0:1: [sdc] Mode Sense: 03 00 00 00
[ 356.656833] sd 2:0:0:1: [sdc] Assuming drive cache: write through
[ 356.660676] sd 2:0:0:0: [sdb] 1983493 512-byte hardware sectors (1016 MB)
[ 356.661597] sd 2:0:0:1: [sdc] 38374 512-byte hardware sectors (20 MB)
[ 356.662554] sd 2:0:0:0: [sdb] Write Protect is off
[ 356.662567] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 356.662571] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 356.662587] sdb:<5>sd 2:0:0:1: [sdc] Write Protect is off
[ 356.663677] sd 2:0:0:1: [sdc] Mode Sense: 03 00 00 00
[ 356.663683] sd 2:0:0:1: [sdc] Assuming drive cache: write through
[ 356.663692] sdc:
[ 356.673268]
[ 391.444870] type=1503 audit(1241155625.805:5):
operation="inode_permission" requested_mask="::r" denied_mask="::r"
fsuid=7 name="/usr/local/lib/libpopt.so.0.0.0" pid=7888
profile="/usr/sbin/cupsd"
[ 393.368292] ppdev0: registered pardevice
[ 393.416274] ppdev0: unregistered pardevice
[ 393.470217] ppdev0: registered pardevice
[ 393.520429] ppdev0: unregistered pardevice
[ 393.575822] type=1503 audit(1241155627.933:6):
operation="inode_permission" requested_mask="r::" denied_mask="r::"
fsuid=7 name="/proc/7898/net/" pid=7898 profile="/usr/sbin/cupsd"
[ 394.618346] type=1503 audit(1241155628.977:7):
operation="inode_permission" requested_mask="r::" denied_mask="r::"
fsuid=7 name="/proc/7902/net/" pid=7902 profile="/usr/sbin/cupsd"
[ 394.715720] NET: Registered protocol family 10
[ 394.718939] lo: Disabled Privacy Extensions
[ 394.720668] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 394.722584] type=1503 audit(1241155629.081:8):
operation="socket_create" family="ax25" sock_type="dgram" protocol=0
pid=7902 profile="/usr/sbin/cupsd"
[ 394.722603] type=1503 audit(1241155629.081:9):
operation="socket_create" family="netrom" sock_type="seqpacket"
protocol=0 pid=7902 profile="/usr/sbin/cupsd"
[ 394.722613] type=1503 audit(1241155629.081:10):
operation="socket_create" family="rose" sock_type="dgram" protocol=0
pid=7902 profile="/usr/sbin/cupsd"
[ 394.722622] type=1503 audit(1241155629.081:11):
operation="socket_create" family="ipx" sock_type="dgram" protocol=0
pid=7902 profile="/usr/sbin/cupsd"
[ 394.722631] type=1503 audit(1241155629.081:12):
operation="socket_create" family="appletalk" sock_type="dgram"
protocol=0 pid=7902 profile="/usr/sbin/cupsd"
[ 394.722641] type=1503 audit(1241155629.081:13):
operation="socket_create" family="econet" sock_type="dgram" protocol=0
pid=7902 profile="/usr/sbin/cupsd"
[ 394.722650] type=1503 audit(1241155629.081:14):
operation="socket_create" family="ash" sock_type="dgram" protocol=0
pid=7902 profile="/usr/sbin/cupsd"
[ 394.832122] ppdev0: registered pardevice
[ 394.880025] ppdev0: unregistered pardevice
[ 955.281129] usb 5-2: USB disconnect, address 2
Module Size Used by
ipv6 263972 8
nls_iso8859_1 12032 0
nls_cp437 13696 0
vfat 18816 0
fat 57376 1 vfat
usb_storage 81728 0
libusual 27156 1 usb_storage
binfmt_misc 16904 1
rfcomm 44432 0
bridge 56980 0
stp 10628 1 bridge
bnep 20480 2
sco 18308 2
l2cap 30464 6 rfcomm,bnep
bluetooth 61924 6 rfcomm,bnep,sco,l2cap
ppdev 15620 0
capifs 12424 1
cpufreq_conservative 14600 0
cpufreq_ondemand 14988 0
cpufreq_stats 13188 0
cpufreq_userspace 11396 0
cpufreq_powersave 9856 0
freq_table 12672 2 cpufreq_ondemand,cpufreq_stats
sbs 19464 0
container 11520 0
wmi 14504 0
pci_slot 12552 0
sbshc 13440 1 sbs
video 25104 0
output 11008 1 video
battery 18436 0
af_packet 25728 4
ppp_generic 32668 0
slhc 14208 1 ppp_generic
iptable_filter 10752 0
ip_tables 19600 1 iptable_filter
x_tables 22916 1 ip_tables
ac 12292 0
lp 17156 0
evdev 17696 7
serio_raw 13444 0
psmouse 45200 0
snd_via82xx 32536 3
gameport 19468 1 snd_via82xx
snd_ac97_codec 111652 1 snd_via82xx
ac97_bus 9856 1 snd_ac97_codec
snd_pcm_oss 46848 0
snd_mixer_oss 22784 1 snd_pcm_oss
snd_pcm 83204 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 16136 2 snd_via82xx,snd_pcm
snd_mpu401_uart 15360 1 snd_via82xx
snd_seq_dummy 10884 0
parport_pc 39204 1
parport 42604 3 ppdev,lp,parport_pc
pcspkr 10624 0
snd_seq_oss 38528 0
snd_seq_midi 14336 0
snd_rawmidi 29824 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi
button 14224 0
snd_seq 57776 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 29960 2 snd_pcm,snd_seq
snd_seq_device 15116 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 63268 17
snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_viapro 15764 0
soundcore 15328 1 snd
i2c_core 31892 1 i2c_viapro
via_agp 16256 1
shpchp 37908 0
agpgart 42184 1 via_agp
pci_hotplug 35236 1 shpchp
ext3 133256 1
jbd 55444 1 ext3
mbcache 16004 1 ext3
sr_mod 22212 0
cdrom 43168 1 sr_mod
sd_mod 42264 5
crc_t10dif 9984 1 sd_mod
sg 39732 0
pata_acpi 12160 0
uhci_hcd 30736 0
ehci_hcd 43276 0
pata_via 16132 4
ata_generic 12932 0
via_rhine 30216 0
mii 13440 1 via_rhine
usbcore 148848 5 usb_storage,libusual,uhci_hcd,ehci_hcd
libata 177312 3 pata_acpi,pata_via,ata_generic
scsi_mod 155212 5 usb_storage,sr_mod,sd_mod,sg,libata
dock 16656 1 libata
thermal 23708 0
processor 42156 1 thermal
fan 12548 0
fbcon 47648 0
tileblit 10880 1 fbcon
font 16512 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
fuse 60828 7
MoemData.txt
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.27-7-generic
With this Subject Line cogent experts will be alerted, and useful
case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in
YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for
dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2
(Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008
scanModem update of: 2009_04_28
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 00:05.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:05.0 1057:3052 1057:3020 Modem: Motorola SM56 Data Fax Modem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 00:05.0 ----
[ 0.506235] PCI: 0000:00:05.0 reg 10 32bit mmio: [ee000000, ee000fff]
[ 0.506243] PCI: 0000:00:05.0 reg 14 io port: [e000, e0ff]
[ 0.506278] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.506283] pci 0000:00:05.0: PME# disabled
[ 1.921453] serial 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.922389] 0000:00:05.0: ttyS2 at I/O 0xe008 (irq = 16) is a 16450
[ 1.922918] 0000:00:05.0: ttyS3 at I/O 0xe010 (irq = 16) is a 8250
[ 1.923065] Couldn't register serial port 0000:00:05.0: -28
The PCI slot 00:05.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:05.0:
Modem chipset detected on
NAME="Modem: Motorola SM56 Data Fax Modem "
CLASS=0703
PCIDEV=1057:3052
SUBSYS=1057:3020
IRQ=16
IDENT=slamr
For candidate modem in: 00:05.0
0703 Modem: Motorola SM56 Data Fax Modem
Primary device ID: 1057:3052
Support type needed or chipset: slamr
1057:3052 has a Motorola chipset, poorly supported by Motorola itself
However Zello discovered that drivers written to support Smartlink
modems do support the 1057:3052 chipset!!
It sufficed to add 1057:3052 to the list of modem cards recognized by
the Smartlink slamr driver.
There is a ungrab-winmodem driver used in conjunction with slamr,
which must have 1057:3052
similarly added. See messages from Zello:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html
and Alvaro Aguirre about the ungrab-winmodem fix:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html
For general guidance on ungrab-winmodem + slamr usage, read the
DOCs/Smartlink.txt
The modem is supported by the Smartlink
plus the slmodemd helper utility. Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
From http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ ,
download the package slamr-2.6.27-7-generic.tar.gz
Under Linux, open a terminal and unpack with:
$ tar zxvf slamr*.tar.gz
Move into the unpacked folder
$ cd slamr-2.6.27-7-generic
Look around
$ ls
Run the
$ sudo ./setup
Afterwards do:
$ slmodemd --help
$ slmodemd --countrylist &> Clist.txt
If not in the USA, look for your COUNTRY_NAME therein.
Do and edit with:
$ sudo gedit /etc/default/sl-modem-daemon
and therein replace the USA in the line:
SLMODEMD_COUNTRY=USA
This will provide for the correct Country setting in the automated:
slmodemd -c COUNTRY /dev/slamr0
Read the DOCs/Smartlink.txt and DOCs/YourSystem.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.27-7-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in /usr/include/ .
For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of
some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273064 2008-10-16 07:21 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth0:avahi
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
