Query: Is there a terminal command to ensure that all audio function is shut off? I'm not sure how to shutdown all audio function. Thanks Dave On Sun, 2009-04-19 at 09:56 -0400, Marvin Stodolsky wrote: > Try shutting down all audio function before setting the symbolic link > and again trying > $ sudo wvdialconf > > MarvS > > On Sat, Apr 18, 2009 at 5:40 PM, Dave and Marleen Rentoul > <rentoul@xxxxxxxxxxx> wrote: > > I forgot to attach a copy of the terminal window. please find attached > > here. > > > > > > ---------- Forwarded message ---------- > > From: Dave and Marleen Rentoul <rentoul@xxxxxxxxxxx> > > To: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> > > Date: Sun, 19 Apr 2009 09:23:01 +1200 > > Subject: Re: agrsm-20080203.tar.gz will not compile on Ubuntu 8.10. > > Thanks Marvin, I very much appreciate your effort in updating the tar > > ball. > > > > Now the drivers are compiled and installed. However I've hit another > > issue. I followed the instructions through to the first test using > > wvdialconf. That was it, it couldn't find my modem. I tried adding the > > "PCI=noacpi" into the grub file. The result was the system hung while > > booting up and I had to use recovery mode. I then changed the PCI slot > > the modem was in. This was unsuccessful also. > > > > Any ideas would be much appreciated. > > > > Thanks again > > > > Dave > > > > > > > > > > On Sat, 2009-04-18 at 21:39 -0400, Marvin Stodolsky wrote: > >> Dave, > >> > >> Per the attachment, I've done the fix and will send you the tarball separately > >> > >> MarvS > >> > >> On Sat, Apr 18, 2009 at 10:23 AM, Marvin Stodolsky > >> <marvin.stodolsky@xxxxxxxxx> wrote: > >> > Dave, > >> > > >> > The ‘struct uart_info’ error has been encoiubtered i other code > >> > packages. The fix is to make a change like > >> > > >> > struct tty_struct *tty =p->port.info->port.tty; > >> > from an original like: > >> > struct tty_struct *tty =p->port.info->tty; > >> > > >> > But I'm not under linux now and cannot check in detail. > >> > Maybe this PM. But you can search out the lines like above and test yourself. > >> > > >> > MarvS > >> > > >> > On Fri, Apr 17, 2009 at 4:25 PM, Dave and Marleen Rentoul > >> > <rentoul@xxxxxxxxxxx> wrote: > >> >> Hi, can any one that has installed the drivers for a:- > >> >> > >> >> NAME="Communication controller: Agere Systems V.92 56K WinModem " > >> >> CLASS=0780 > >> >> PCIDEV=11c1:048c > >> >> SUBSYS=11c1:044c > >> >> IDENT=agrsm > >> >> > >> >> please tell me what I need to do to so that the "make" instruction > >> >> compiles the code without error > >> >> > >> >> "/home/username/Desktop/agrsm/serial26.c:1007: error: ‘struct uart_info’ > >> >> has no member named ‘tty’" > >> >> > >> >> Thanks > >> >> > >> >> Dave > >> >> > >> >> > >> >> Quote from terminal window follows:- > >> >> > >> >> username@Elmo:~/Desktop/agrsm$ make > >> >> make -C /lib/modules/2.6.27-7-generic/build > >> >> SUBDIRS=/home/username/Desktop/agrsm modules > >> >> make[1]: Entering directory `/usr/src/linux-headers-2.6.27-7-generic' > >> >> CC [M] /home/username/Desktop/agrsm/serial26.o > >> >> /home/username/Desktop/agrsm/serial26.c: In function ‘receive_chars’: > >> >> /home/username/Desktop/agrsm/serial26.c:1007: error: ‘struct uart_info’ > >> >> has no member named ‘tty’ > >> >> /home/username/Desktop/agrsm/serial26.c: In function > >> >> ‘serial8250_get_mctrl’: > >> >> /home/username/Desktop/agrsm/serial26.c:1371: warning: unused variable > >> >> ‘flags’ > >> >> /home/username/Desktop/agrsm/serial26.c: In function > >> >> ‘serial8250_config_port’: > >> >> /home/username/Desktop/agrsm/serial26.c:2039: warning: unused variable > >> >> ‘ret’ > >> >> /home/username/Desktop/agrsm/serial26.c: At top level: > >> >> /home/username/Desktop/agrsm/serial26.c:2131: warning: initialization > >> >> from incompatible pointer type > >> >> /home/username/Desktop/agrsm/serial26.c:2132: warning: initialization > >> >> from incompatible pointer type > >> >> make[2]: *** [/home/username/Desktop/agrsm/serial26.o] Error 1 > >> >> make[1]: *** [_module_/home/username/Desktop/agrsm] Error 2 > >> >> make[1]: Leaving directory `/usr/src/linux-headers-2.6.27-7-generic' > >> >> make: *** [modules] Error 2 > >> >> > >> >> > >> >> > >> > > > > >
