Try shutting down all audio function before setting the symbolic link and again trying $ sudo wvdialconf MarvS On Sat, Apr 18, 2009 at 5:40 PM, Dave and Marleen Rentoul <rentoul@xxxxxxxxxxx> wrote: > I forgot to attach a copy of the terminal window. please find attached > here. > > > ---------- Forwarded message ---------- > From: Dave and Marleen Rentoul <rentoul@xxxxxxxxxxx> > To: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> > Date: Sun, 19 Apr 2009 09:23:01 +1200 > Subject: Re: agrsm-20080203.tar.gz will not compile on Ubuntu 8.10. > Thanks Marvin, I very much appreciate your effort in updating the tar > ball. > > Now the drivers are compiled and installed. However I've hit another > issue. I followed the instructions through to the first test using > wvdialconf. That was it, it couldn't find my modem. I tried adding the > "PCI=noacpi" into the grub file. The result was the system hung while > booting up and I had to use recovery mode. I then changed the PCI slot > the modem was in. This was unsuccessful also. > > Any ideas would be much appreciated. > > Thanks again > > Dave > > > > > On Sat, 2009-04-18 at 21:39 -0400, Marvin Stodolsky wrote: >> Dave, >> >> Per the attachment, I've done the fix and will send you the tarball separately >> >> MarvS >> >> On Sat, Apr 18, 2009 at 10:23 AM, Marvin Stodolsky >> <marvin.stodolsky@xxxxxxxxx> wrote: >> > Dave, >> > >> > The ‘struct uart_info’ error has been encoiubtered i other code >> > packages. The fix is to make a change like >> > >> > struct tty_struct *tty =p->port.info->port.tty; >> > from an original like: >> > struct tty_struct *tty =p->port.info->tty; >> > >> > But I'm not under linux now and cannot check in detail. >> > Maybe this PM. But you can search out the lines like above and test yourself. >> > >> > MarvS >> > >> > On Fri, Apr 17, 2009 at 4:25 PM, Dave and Marleen Rentoul >> > <rentoul@xxxxxxxxxxx> wrote: >> >> Hi, can any one that has installed the drivers for a:- >> >> >> >> NAME="Communication controller: Agere Systems V.92 56K WinModem " >> >> CLASS=0780 >> >> PCIDEV=11c1:048c >> >> SUBSYS=11c1:044c >> >> IDENT=agrsm >> >> >> >> please tell me what I need to do to so that the "make" instruction >> >> compiles the code without error >> >> >> >> "/home/username/Desktop/agrsm/serial26.c:1007: error: ‘struct uart_info’ >> >> has no member named ‘tty’" >> >> >> >> Thanks >> >> >> >> Dave >> >> >> >> >> >> Quote from terminal window follows:- >> >> >> >> username@Elmo:~/Desktop/agrsm$ make >> >> make -C /lib/modules/2.6.27-7-generic/build >> >> SUBDIRS=/home/username/Desktop/agrsm modules >> >> make[1]: Entering directory `/usr/src/linux-headers-2.6.27-7-generic' >> >> CC [M] /home/username/Desktop/agrsm/serial26.o >> >> /home/username/Desktop/agrsm/serial26.c: In function ‘receive_chars’: >> >> /home/username/Desktop/agrsm/serial26.c:1007: error: ‘struct uart_info’ >> >> has no member named ‘tty’ >> >> /home/username/Desktop/agrsm/serial26.c: In function >> >> ‘serial8250_get_mctrl’: >> >> /home/username/Desktop/agrsm/serial26.c:1371: warning: unused variable >> >> ‘flags’ >> >> /home/username/Desktop/agrsm/serial26.c: In function >> >> ‘serial8250_config_port’: >> >> /home/username/Desktop/agrsm/serial26.c:2039: warning: unused variable >> >> ‘ret’ >> >> /home/username/Desktop/agrsm/serial26.c: At top level: >> >> /home/username/Desktop/agrsm/serial26.c:2131: warning: initialization >> >> from incompatible pointer type >> >> /home/username/Desktop/agrsm/serial26.c:2132: warning: initialization >> >> from incompatible pointer type >> >> make[2]: *** [/home/username/Desktop/agrsm/serial26.o] Error 1 >> >> make[1]: *** [_module_/home/username/Desktop/agrsm] Error 2 >> >> make[1]: Leaving directory `/usr/src/linux-headers-2.6.27-7-generic' >> >> make: *** [modules] Error 2 >> >> >> >> >> >> >> > > >
