Re: Humble request for an updated slamr driver for Ubuntu 9.04 ( 2.6.28-11-generic )

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Shannon,

Gmail is misbehaving, so I am sending this from yahoo mail.

Try the following Init String:

Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2  +MS=90
and if it fails
bring it to
Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2  +MS=34

also add options to /etc/wvdial.conf

Carrier Check = no
# Stupid Mode = yes

if for some reason connectivity struggles remove the "#" from the Stupid Mode = yes option.  To find out more about the options check the DOCs/ folder in Modem/ directory which was generated by scanModem.  The file wvdial.txt explains it in details.  

Hope this helps,

Regards,

Antonio 



--- On Sat, 4/11/09, Shannon VanWagner <shannon.vanwagner@xxxxxxxxx> wrote:

> From: Shannon VanWagner <shannon.vanwagner@xxxxxxxxx>
> Subject: Re: Humble request for an updated slamr driver for Ubuntu 9.04 (  2.6.28-11-generic )
> To: "Antonio Olivares" <olivares14031@xxxxxxxxx>
> Cc: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx>, discuss@xxxxxxxxxxxxx
> Date: Saturday, April 11, 2009, 1:55 PM
> Thanks a bunch Antonio, that seems to have enabled detection
> and I was
> able to dial out with it but now it seems to disconnect:
> 
> barbara@ubuntu-barb:/etc$ sudo wvdial
> --> WvDial: Internet dialer version 1.60
> --> Cannot get information for serial port.
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> OK
> --> Modem initialized.
> --> Sending: ATDT2063121000
> --> Waiting for carrier.
> ATDT2063121000
> --> Disconnecting at Sat Apr 11 13:52:06 2009
> 
> 
> This was after I ran sudo wvdialconf
> 
> barbara@ubuntu-barb:/etc$ cat /etc/wvdial.conf    (some
> values edited)
> 
> [Dialer Defaults]
> Init1 = ATZ
> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> Modem Type = Analog Modem
> Baud = 460800
> New PPPD = yes
> Modem = /dev/ttySL0
> ISDN = 0
> Phone = (edited)
> Password = (edited)
> Username = (edited)
> 
> 
> Any suggestions?
> 
> Thanks very much!!!
> 
> Shannon VanWagner
> 
> 2009/4/11 Antonio Olivares <olivares14031@xxxxxxxxx>:
> > Shannon,
> >
> > Try the following:
> >
> > me@mach:~$     sudo modprobe ungrab-winmodem
> > me@mach:~$     sudo modprobe slamr
> > but add this
> > me@mach:~$     sudo mknod -m 600 /dev/slamr0 c 242 0
> > before
> > me@mach:~$     sudo  slmodemd -c USA  /dev/slamr0
> >
> > Report back if this fixed it or still seeing the same
> problem?
> >
> > Regards,
> >
> > Antonio
> >
> > 2009/4/11 Shannon VanWagner
> <shannon.vanwagner@xxxxxxxxx>:
> >> Thanks all!
> >>
> >> I was able to get the packages installed, but
> I'm not able to get the
> >> modem to show up at /dev/slamr or /dev/ttySL0
> >>
> >> The modrobe command shows the slamr drive
> installed but I'm not seeing
> >> the /dev entry for the modem.
> >>
> >> I've attached a file(things_tried.txt) with
> some things I've tried,
> >> please have a look.
> >>
> >> Any suggestions would be much appreciated!
> >>
> >> Thanks very much!
> >>
> >> Shannon VanWagner
> >> http://humans-enabled.com
> >>
> >>
> >> On Fri, Apr 10, 2009 at 5:52 PM, Marvin Stodolsky
> >> <marvin.stodolsky@xxxxxxxxx> wrote:
> >>> Shannon,
> >>>
> >>> Ahmed's instructions are correct, if you
> are alternately online by
> >>> ethernet/wireless.
> >>>
> >>> However if not already online, if will be
> easiest to first get from
> >>>
> http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/
>  the
> >>>  slamr-2.6.27-??-generic.tar.gz  that
> matches the
> >>> kernel 2.6.27-??-generic already installed on
> your System,
> >>>
> >>> That will enable you to get on line under the
> 2.6.27-??-generic kernel and run:
> >>> $ sudo apt-get update
> >>> $ sudo apt-get install dkms sl-modem-source
> >>> per Ahmed's instructions.
> >>>
> >>> For service under the 2.6.28-11-generic
> kernel, you will additionally
> >>> have to install packages from
> >>>
> http://packages.ubuntu.com/jaunty/linux-headers-2.6.28-11-generic/
> >>> (unless they are already on your system) to
> enable compiling under
> >>> 2.6.28-11-generic.
> >>>
> >>> That done, when you reboot into
> 2.6.28-11-generic, the dkms system
> >>> will compile and install the slamr driver.
> >>>
> >>> MarvS
> >>> scanModem maintainer
> >>>
> >>>
> >>> On Fri, Apr 10, 2009 at 11:50 AM, أحمد
> المحمودي
> >>> <aelmahmoudy@xxxxxxxxxxxxxxxxxxxxx>
> wrote:
> >>>> On Fri, Apr 10, 2009 at 05:54:41AM -0700,
> Shannon VanWagner wrote:
> >>>>> I was looking here(and not seeing it):
> >>>>>
> http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/
> >>>>>
> >>>>> Can you point me to where to download
> it?
> >>>> ---end quoted text---
> >>>>
> >>>> From Ubuntu repository:
> >>>>
> http://packages.ubuntu.com/jaunty/sl-modem-source
> >>>>
> >>>> simply run: sudo apt-get install
> sl-modem-source
> >>>>
> >>>> --
> >>>>  ‎أحمد المحمودي (Ahmed
> El-Mahmoudy)
> >>>>  Digital design engineer
> >>>>  GPG KeyID: 0x9DCA0B27 (@
> subkeys.pgp.net)
> >>>>  GPG Fingerprint: 087D 3767 8CAC 65B1
> 8F6C  156E D325 C3C8 9DCA 0B27
> >>>>
> >>>
> >>
> >


      


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux