Nonni, If you could connect but not browse, then add the following to /etc/resolv.conf nameserver 142.161.130.154 nameserver 142.161.2.154 then attempt to dialout again. If you get stuck or have further questions, please read Jacques' post-install web page: http://linmodems.technion.ac.il/post-install.html Please follow along carefully and send back what you have done to try to connect. Report back presently. Regards, Antonio On 3/5/09, Nonni Jonsson <nonnijonsson@xxxxxxxx> wrote: > Hello There > > This is how I started up > ---------------------------------------------------------------------------- > > > nonni@linux-s4w1:~> su root > Password: > linux-s4w1:/home/nonni # slmodemd -c CANADA --alsa modem:1 > SmartLink Soft Modem: version 2.9.11 Feb 22 2009 09:37:12 > symbolic link `/dev/ttySL0' -> `/dev/pts/1' created. > modem `modem:1' created. TTY is `/dev/pts/1' > Use `/dev/ttySL0' as modem device, Ctrl+C for termination. > > (these commands below did not work) > /etc/wvdial.conf > su root > # /etc/wvdial.conf > # wvdialconf wvtest > wvtest > # wvdial --config wvtest > # gedit wvtest > > --------------------------------------------------------------------------------- > On Kinternet link on toolbar there is a configuration file > ask-password yes > auto-dns yes > auto-reconnect yes > auto-reconnect-delay 15 > auto-reconnect-exits > baud-rate 115200 > chat script wvdial > connection-type modem > defaultroute yes > demand no > device /dev/ttySLO > dial-command ATDT > dial-prefix > dial-prefix-regex > dns1 > dns2 > endpoint random > idle-seconds 900 > ifcfg-filename ifcfg-modem0 > init8 ATM1 > local-ip > max-number-of-links 1 > modify-dns yes > modify-ip yes > multilink no > password <hidden> > phone 2254638 > pppd-options > ppp-mode ppp > provider-filename provider0 > remote-ip > stupid-mode no > username fperrin@xxxxxxx > > ------------------------------------------------------------------------------ > > During 5 dial in attemps it succeded twice :-) > It would not load a web page and dropped off after about 5 minutes > this is one of the dial in logs > > SuSE Meta pppd (smpppd-ifcfg), Version 1.59_SVN31 on linux-s4w1. > Status is: disconnected > trying to connect to smpppd > connect to smpppd > Status is: disconnected > Status is: connecting > pppd[0]: Plugin passwordfd.so loaded. > pppd[0]: --> WvDial: Internet dialer version 1.60 > pppd[0]: --> Initializing modem. > pppd[0]: --> Sending: ATM1 > pppd[0]: ATM1 > pppd[0]: OK > pppd[0]: --> Modem initialized. > pppd[0]: --> Sending: ATDT2254638 > pppd[0]: --> Waiting for carrier. > pppd[0]: ATDT2254638 > pppd[0]: CONNECT 44000 > pppd[0]: --> Carrier detected. Waiting for prompt. > pppd[0]: C > pppd[0]: MTS Internet > pppd[0]: WARNING > pppd[0]: > pppd[0]: This is a private system. Unauthorized access is strictly > prohibited. > pppd[0]: Individuals using or in any way accessing this system may have > their > pppd[0]: activities on this system monitored and recorded, and such > individuals > pppd[0]: expressly consent to such monitoring. Such monitoring may result in > pppd[0]: release of information which may identify individuals using or in > any > pppd[0]: way accessing this system, and may result in provision of that > pppd[0]: information to law enforcement agencies, or use of that information > in > pppd[0]: association with any civil action deemed necessary relating to such > use > pppd[0]: or access. Anyone accessing, connecting to or modifying this system > pppd[0]: without the express permission of MTS are trespassing, and will be > pppd[0]: prosecuted to the fullest extent of the law. > pppd[0]: swrvmb01bb8-ac02 > pppd[0]: User Access Verification > pppd[0]: Username: > pppd[0]: --> Looks like a login prompt. > pppd[0]: --> Sending: fperrin@xxxxxxx > pppd[0]: Username: > pppd[0]: --> Looks like a login prompt. > pppd[0]: --> Sending: fperrin@xxxxxxx > pppd[0]: fperrin@xxxxxxx > pppd[0]: Password: > pppd[0]: --> Looks like a password prompt. > pppd[0]: --> Sending: (password) > pppd[0]: Authentication failure > pppd[0]: Username: ------------------------------------(it sent my password > here) > pppd[0]: Password: > pppd[0]: --> Looks like a password prompt. > pppd[0]: --> Sending: (password) > pppd[0]: Authentication failure > pppd[0]: Username: > pppd[0]: --> Looks like a login prompt. > pppd[0]: --> Sending: fperrin@xxxxxxx > pppd[0]: --> Don't know what to do! Starting pppd and hoping for the best. > pppd[0]: Script /usr/bin/wvdial --chat --no-syslog --config > /var/run/smpppd/chat-modem0.conf smpppd finished (pid 10735), status = 0x0 > pppd[0]: Serial connection established. > pppd[0]: Renamed interface ppp0 to modem0 > pppd[0]: Using interface modem0 > Status is: connecting > pppd[0]: Connect: modem0 <--> /dev/ttySL0 > pppd[0]: PAP authentication succeeded > pppd[0]: replacing old default route to eth0 [192.168.123.254] > pppd[0]: local IP address 205.200.44.130 > pppd[0]: remote IP address 205.200.44.129 > pppd[0]: primary DNS address 142.161.130.154 > pppd[0]: secondary DNS address 142.161.2.154 > pppd[0]: Script /etc/ppp/ip-up finished (pid 3843), status = 0x0 > Status is: connected > pppd[0]: No response to 4 echo-requests > pppd[0]: Serial link appears to be disconnected. > pppd[0]: Connect time 5.0 minutes. > pppd[0]: Sent 17398 bytes, received 41453 bytes. > pppd[0]: restoring old default route to eth0 [192.168.123.254] > pppd[0]: Connection terminated. > Status is: disconnected > pppd[0] died: Lack of LCP echo responses (exit code 15) > ---------------------------------------------------------------------------- > > > Nonni > >
