scanModem recommends you get SLMODEMD.gcc4.3.tar.gz Support type needed or chipset: slmodemd supporting the snd-hda-intel audio+modem driver An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel provides Low Level support enabling contact with the modem hardware. For all BUT Conexant chip soft modems (using hsfmodem software) complementary High Level support is through a Smartlink utility: slmodemd Download from http://linmodems.technion.ac.il/packages/smartlink/ the package SLMODEMD.gcc4.3.tar.gz having a compiled slmodemd. Unpack under Linux with: $ tar zxf SLMODEMD.gcc4.3.tar.gz and read instructions therein. But briefly, the modem is setup with command: sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 reporting dynamic creation of ports: /dev/ttySL0 --> /dev/pts/N , with N some number Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance. If the above file SLMODEMD.gcc4.3.tar.gz fails to work on your system, please try the following one http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD_gcc4.2_alsa1.0.17.tar.gz Report back with success or comments/suggestions. Hope that one of the above packages works and you can get online :) Regards, Antonio On Thu, Dec 18, 2008 at 9:59 AM, Guido Erlinger <ml@xxxxxxxx> wrote: > ModemData.txt attached to this mail > > Thank you for your help. > > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.27-9-generic > With this Subject Line cogent experts will be alerted, and useful case names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for dialup service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information ---------------------------- > CPU=i686, > Linux version 2.6.27-9-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008 > scanModem update of: 2008_11_06 > > There are no blacklisted modem drivers in /etc/modprobe* files > Attached USB devices are: > ID 1d6b:0002 Linux Foundation 2.0 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > > USB modems not recognized > > For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1b.0 8086:2668 17c0:2017 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW > > Modem interrupt assignment and sharing: > 16: 716 IO-APIC-fasteoi HDA Intel, fglrx[0]@PCI:1:0:0 > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > [ 0.457050] PCI: 0000:00:1b.0 reg 10 64bit mmio: [b0000000, b0003fff] > [ 0.457098] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.457103] pci 0000:00:1b.0: PME# disabled > [ 17.993420] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 > [ 17.993432] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 17.993468] HDA Intel 0000:00:1b.0: setting latency timer to 64 > > The PCI slot 00:1b.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== > The ALSA packages provide audio support and also drivers for some modems. > ALSA diagnostics are written during bootup to /proc/asound/ folders. > > The ALSA verion is 1.0.17 > The modem cards detected by "aplay -l" are: > Karte 0: Intel [HDA Intel], Gerät 6: Si3054 Modem [Si3054 Modem] > > The /proc/asound/pcm file reports: > ----------------------- > 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 > 00-01: AD198x Digital : AD198x Digital : playback 1 > 00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1 > > about /proc/asound/cards: > ------------------------ > 0 [Intel ]: HDA-Intel - HDA Intel > HDA Intel at 0xb0000000 irq 16 > > PCI slot 00:1b.0 has a High Definition Audio Card > The drivers are in the kernel modules tree at: > /lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko > /lib/modules/2.6.27-9-generic/kernel/sound/pci/hda/snd-hda-intel.ko > The modem codec file for the HDA card is: /proc/asound/card0/codec#1 > -------------------------------------------------------- > Codec: Motorola Si3054 > Address: 1 > Vendor Id: 0x10573055 > Subsystem Id: 0x10573055 > Revision Id: 0x100700 > Modem Function Group: 0x1 > > The audio card hosts a softmodem chip: 0x10573055 > > The softmodem chip 0x10573055 is in principle supported by the COMM support of slmodemd > and the joint snd-hda-intel audio+modem driver, begun with ALSA version 1.0.13. > For HDA cards with ALC883 chips, an upgrade to ALSA verions 1.0.15 way be necessary. Instructions for Upgrading snd-hda-intel and its dependent driver set are at: > http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html > > If not a Conexant modem, the driver snd-hda-intel with its dependent drivers: > snd_hda_intel 381488 3 > snd_pcm 83204 2 snd_hda_intel,snd_pcm_oss > snd 63268 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > snd_page_alloc 16136 2 snd_hda_intel,snd_pcm > ---------- > provide audio + modem support with the modem chip residing on the subsystem. > Any particular card can host any one of several soft modem chips. > > === Finished firmware and bootup diagnostics, next deducing cogent software. === > > Predictive diagnostics for card in bus 00:1b.0: > Modem chipset detected on > NAME="Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW " > CLASS=0403 > PCIDEV=8086:2668 > SUBSYS=17c0:2017 > IRQ=16 > HDA=8086:2668 > SOFT=8086:2668.HDA > CHIP=0x10573055 > IDENT=slmodemd > SLMODEMD_DEVICE=hw:0,6 > Driver=snd-hda-intel > > For candidate modem in: 00:1b.0 > 0403 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW > Primary device ID: 8086:2668 > Subsystem PCI_id 17c0:2017 > Softmodem codec or chipset from diagnostics: 0x10573055 > from Archives: > The HDA card softmodem chip is 0x10573055 > > > Support type needed or chipset: slmodemd supporting the snd-hda-intel audio+modem driver > > An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel > provides Low Level support enabling contact with the modem hardware. > For all BUT Conexant chip soft modems (using hsfmodem software) > complementary High Level support is through a Smartlink utility: slmodemd > > Download from http://linmodems.technion.ac.il/packages/smartlink/ > the package SLMODEMD.gcc4.3.tar.gz having a compiled slmodemd. Unpack under Linux with: > $ tar zxf SLMODEMD.gcc4.3.tar.gz > and read instructions therein. But briefly, the modem is setup with command: > sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 > reporting dynamic creation of ports: > /dev/ttySL0 --> /dev/pts/N , with N some number > Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance. > > ----------------end Softmodem section -------------- > > Writing DOCs/Intel.txt > Writing DOCs/Smartlink.txt > ============ end Smartlink section ===================== > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.3.2 > and the compiler used in kernel assembly: 4.3.2 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.3 > linuc_headers base folder /lib/modules/2.6.27-9-generic/build > > However some compilations and executable functions may need additional files, > in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ . > For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > > > If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 277160 2008-11-20 21:58 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble shooting be necessary. > ========================================================== > > # start/stop the daemon when the USB modem is connected > KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > /etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected > /etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" > Within /etc/modprobe.conf files: > /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > /etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0) > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > >
