Andrea, The 0x11c11040 modem chip cannot be made to word on a X86_32 system. If you should choose to do a 32bit installation, likely it can be made to work. MarvS On Sun, Dec 7, 2008 at 9:53 PM, Andrea Torres <amekare@xxxxxxxxx> wrote: > Hi, my laptop has installed ubuntu 8.10. I followed the instructions > and the result was the next (also attachments)-what I can see it is > related to Bootup.txt so it included in the attachment too: > > --------------------------------------------------------------------------------------------------------------------------------- > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.27-9-generic > With this Subject Line cogent experts will be alerted, and useful > case names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in > YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for > dialup service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an > Internet Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information ---------------------------- > CPU=x86_64, > Linux version 2.6.27-9-generic (buildd@yellow) (gcc version 4.3.2 > (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 22:15:32 UTC 2008 > scanModem update of: 2008_11_06 > > > Some modem drivers can only be used in 32 bit modem on x86_64 systems, > while some others are competent on x86_64 Systems. Cases are: > 1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html > for the snd-hda-intel audio+modem driver. Also applicable to AC97 > modem controllers. > In both cases, 32 bit libraries must be installed to support the > slmodemd helper having a precompiled 32 bit component. > 2) For USB modems using the slusb.ko driver. 32 bit libraries must be > installed to support the slmodemd helper having a precompiled 32 bit > component > 3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes > are x86_64 competent. > > There are no blacklisted modem drivers in /etc/modprobe* files > Attached USB devices are: > ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive > ID 1d6b:0002 Linux Foundation 2.0 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 04f2:b008 Chicony Electronics Co., Ltd > ID 1d6b:0002 Linux Foundation 2.0 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > > USB modems not recognized > > For candidate card in slot 00:1b.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1b.0 8086:284b 1179:ff00 Audio device: Intel Corporation 82801H > > Modem interrupt assignment and sharing: > 22: 7320 580773 IO-APIC-fasteoi HDA Intel > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > [ 0.656572] PCI: 0000:00:1b.0 reg 10 64bit mmio: [fc500000, fc503fff] > [ 0.656630] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.656635] pci 0000:00:1b.0: PME# disabled > [ 13.209001] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, > low) -> IRQ 22 > [ 13.209047] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 503.176064] HDA Intel 0000:00:1b.0: PCI INT A disabled > [ 503.812101] HDA Intel 0000:00:1b.0: restoring config space at > offset 0x1 (was 0x100106, writing 0x100102) > [ 503.812123] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, > low) -> IRQ 22 > [ 503.812130] HDA Intel 0000:00:1b.0: setting latency timer to 64 > > The PCI slot 00:1b.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== > The ALSA packages provide audio support and also drivers for some modems. > ALSA diagnostics are written during bootup to /proc/asound/ folders. > > The ALSA verion is 1.0.17 > The modem cards detected by "aplay -l" are: None > > > The /proc/asound/pcm file reports: > ----------------------- > 00-04: ALC268 Analog : ALC268 Analog : capture 1 > 00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1 > > about /proc/asound/cards: > ------------------------ > 0 [Intel ]: HDA-Intel - HDA Intel > HDA Intel at 0xfc500000 irq 22 > > PCI slot 00:1b.0 has a High Definition Audio Card > The drivers are in the kernel modules tree at: > /lib/modules/2.6.27-9-generic/kernel/sound/pci/hda/snd-hda-intel.ko > /lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko > The modem codec file for the HDA card is: /proc/asound/card0/codec#1 > -------------------------------------------------------- > Codec: LSI ID 1040 > Address: 1 > Vendor Id: 0x11c11040 > Subsystem Id: 0x11790001 > Revision Id: 0x100200 > Modem Function Group: 0x1 > > The audio card hosts a softmodem chip: 0x11c11040 > If not a Conexant modem, the driver > agrmodem+agrserial+patched_snd-hda-intel with its dependent drivers: > > ---------- > provide audio + modem support with the modem chip residing on the subsystem. > Any particular card can host any one of several soft modem chips. > > === Finished firmware and bootup diagnostics, next deducing cogent software. === > > Predictive diagnostics for card in bus 00:1b.0: > Modem chipset detected on > NAME="Audio device: Intel Corporation 82801H " > CLASS=0403 > PCIDEV=8086:284b > SUBSYS=1179:ff00 > IRQ=22 > HDA=8086:284b > SOFT=8086:284b.HDA > CHIP=0x11c11040 > IDENT=11c11040 > Driver=agrmodem+agrserial+patched_snd-hda-intel > > For candidate modem in: 00:1b.0 > 0403 Audio device: Intel Corporation 82801H > Primary device ID: 8086:284b > Subsystem PCI_id 1179:ff00 > Softmodem codec or chipset from diagnostics: 0x11c11040 > from Archives: > The HDA card softmodem chip is 0x11c11040 > > > Support type needed or chipset: 11c11040 > > ----------------end Softmodem section -------------- > > Writing DOCs/Intel.txt > > Vendor 11c1 is Lucent Technologies with modem technology now under LSI Inc. > Their Linux code developer/maintainer is Soumyendu Sarkar. Support > for a chipset and its > continued maintenance is only initiated at the request of a major > chipset buyer, > or comparable sponsor. Several different modem chipset types are produced: > with varying support under Linux. > Device ID Support Name Comment > --------- ------------- ----------- ----------------------------- > 0480 serial_drivers Venus controller chipset 1673JV7 > 0440-045d martian Mars/Apollo DSP (digital signal > processing) chipsets > 0462 none 56K.V90/ADSL Wildwire > 048d none SV2P soft modem > 048(c or f) AGRSM SV2P soft modem > 0600 none soft modem, very few in the field. > 0620 AGRSM Pinball soft modem, in some HP desktop PCs > 011c11040 AGRSM hosted on High Definition Audio cards > 062(1-3) none SV92PP,Pinball soft modem, in some HP desktop PCs > > martian - At http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ > AGRSM - At http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ > Compiling resources for a driver module pair: agrmodem.ko + agrserial.ko > Use the agrsm-HDA-20080721-ALSA15.tar.bz2 or agrsm-HDA-20080721.tar.bz2 > Read the agrsm_howto.txt. For 11c11040 chips, also the > HOWTO-Agere-11c11040-HDA.html > > > The AGRSM code package is not yet functionally on x86_64 systems, > except in Intel architecture > emulation mode. This is because there is a 32 bit encypted component, > precompiled at LSI/Agere Inc. It cannot be functionally linked with > other 64 bit components compiled on a x86_64 system. > When/if LSI Inc. provides the encypted component in 64 bit format, > service will be possible. > > -------------- end Agere Systems section ------------------- > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.3.2 > and the compiler used in kernel assembly: 4.3.2 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.3 > linuc_headers base folder /lib/modules/2.6.27-9-generic/build > > However some compilations and executable functions may need additional files, > in the FileNames.h (so called kernel "h"eaders) collection installed > in /usr/include/ . > For martian_modem, additional required packages are needed. The also > required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev > packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > > > If a driver compilation fails, with message including some lack of > some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. > The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 317184 2008-10-15 21:16 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 > wlan0 wmaster0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble > shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to > blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- >
