Hi, my laptop has installed ubuntu 8.10. I followed the instructions
and the result was the next (also attachments)-what I can see it is
related to Bootup.txt so it included in the attachment too:
---------------------------------------------------------------------------------------------------------------------------------
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.27-9-generic
With this Subject Line cogent experts will be alerted, and useful
case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in
YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for
dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=x86_64,
Linux version 2.6.27-9-generic (buildd@yellow) (gcc version 4.3.2
(Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 22:15:32 UTC 2008
scanModem update of: 2008_11_06
Some modem drivers can only be used in 32 bit modem on x86_64 systems,
while some others are competent on x86_64 Systems. Cases are:
1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html
for the snd-hda-intel audio+modem driver. Also applicable to AC97
modem controllers.
In both cases, 32 bit libraries must be installed to support the
slmodemd helper having a precompiled 32 bit component.
2) For USB modems using the slusb.ko driver. 32 bit libraries must be
installed to support the slmodemd helper having a precompiled 32 bit
component
3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes
are x86_64 competent.
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive
ID 1d6b:0002 Linux Foundation 2.0 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 04f2:b008 Chicony Electronics Co., Ltd
ID 1d6b:0002 Linux Foundation 2.0 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
USB modems not recognized
For candidate card in slot 00:1b.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 1179:ff00 Audio device: Intel Corporation 82801H
Modem interrupt assignment and sharing:
22: 7320 580773 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.656572] PCI: 0000:00:1b.0 reg 10 64bit mmio: [fc500000, fc503fff]
[ 0.656630] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.656635] pci 0000:00:1b.0: PME# disabled
[ 13.209001] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 13.209047] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 503.176064] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 503.812101] HDA Intel 0000:00:1b.0: restoring config space at
offset 0x1 (was 0x100106, writing 0x100102)
[ 503.812123] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 503.812130] HDA Intel 0000:00:1b.0: setting latency timer to 64
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.17
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-04: ALC268 Analog : ALC268 Analog : capture 1
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfc500000 irq 22
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.27-9-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: LSI ID 1040
Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x11790001
Revision Id: 0x100200
Modem Function Group: 0x1
The audio card hosts a softmodem chip: 0x11c11040
If not a Conexant modem, the driver
agrmodem+agrserial+patched_snd-hda-intel with its dependent drivers:
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=1179:ff00
IRQ=22
HDA=8086:284b
SOFT=8086:284b.HDA
CHIP=0x11c11040
IDENT=11c11040
Driver=agrmodem+agrserial+patched_snd-hda-intel
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 1179:ff00
Softmodem codec or chipset from diagnostics: 0x11c11040
from Archives:
The HDA card softmodem chip is 0x11c11040
Support type needed or chipset: 11c11040
----------------end Softmodem section --------------
Writing DOCs/Intel.txt
Vendor 11c1 is Lucent Technologies with modem technology now under LSI Inc.
Their Linux code developer/maintainer is Soumyendu Sarkar. Support
for a chipset and its
continued maintenance is only initiated at the request of a major
chipset buyer,
or comparable sponsor. Several different modem chipset types are produced:
with varying support under Linux.
Device ID Support Name Comment
--------- ------------- ----------- -----------------------------
0480 serial_drivers Venus controller chipset 1673JV7
0440-045d martian Mars/Apollo DSP (digital signal
processing) chipsets
0462 none 56K.V90/ADSL Wildwire
048d none SV2P soft modem
048(c or f) AGRSM SV2P soft modem
0600 none soft modem, very few in the field.
0620 AGRSM Pinball soft modem, in some HP desktop PCs
011c11040 AGRSM hosted on High Definition Audio cards
062(1-3) none SV92PP,Pinball soft modem, in some HP desktop PCs
martian - At http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
AGRSM - At http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Compiling resources for a driver module pair: agrmodem.ko + agrserial.ko
Use the agrsm-HDA-20080721-ALSA15.tar.bz2 or agrsm-HDA-20080721.tar.bz2
Read the agrsm_howto.txt. For 11c11040 chips, also the
HOWTO-Agere-11c11040-HDA.html
The AGRSM code package is not yet functionally on x86_64 systems,
except in Intel architecture
emulation mode. This is because there is a 32 bit encypted component,
precompiled at LSI/Agere Inc. It cannot be functionally linked with
other 64 bit components compiled on a x86_64 system.
When/if LSI Inc. provides the encypted component in 64 bit format,
service will be possible.
-------------- end Agere Systems section -------------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.27-9-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in /usr/include/ .
For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of
some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 317184 2008-10-15 21:16 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
wlan0 wmaster0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.27-9-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=x86_64,
Linux version 2.6.27-9-generic (buildd@yellow) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 22:15:32 UTC 2008
scanModem update of: 2008_11_06
Some modem drivers can only be used in 32 bit modem on x86_64 systems,
while some others are competent on x86_64 Systems. Cases are:
1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html
for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem controllers.
In both cases, 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component.
2) For USB modems using the slusb.ko driver. 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component
3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are x86_64 competent.
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive
ID 1d6b:0002 Linux Foundation 2.0 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 04f2:b008 Chicony Electronics Co., Ltd
ID 1d6b:0002 Linux Foundation 2.0 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
USB modems not recognized
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 1179:ff00 Audio device: Intel Corporation 82801H
Modem interrupt assignment and sharing:
22: 7320 580773 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.656572] PCI: 0000:00:1b.0 reg 10 64bit mmio: [fc500000, fc503fff]
[ 0.656630] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.656635] pci 0000:00:1b.0: PME# disabled
[ 13.209001] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 13.209047] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 503.176064] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 503.812101] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[ 503.812123] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 503.812130] HDA Intel 0000:00:1b.0: setting latency timer to 64
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.17
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-04: ALC268 Analog : ALC268 Analog : capture 1
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfc500000 irq 22
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.27-9-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: LSI ID 1040
Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x11790001
Revision Id: 0x100200
Modem Function Group: 0x1
The audio card hosts a softmodem chip: 0x11c11040
If not a Conexant modem, the driver agrmodem+agrserial+patched_snd-hda-intel with its dependent drivers:
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=1179:ff00
IRQ=22
HDA=8086:284b
SOFT=8086:284b.HDA
CHIP=0x11c11040
IDENT=11c11040
Driver=agrmodem+agrserial+patched_snd-hda-intel
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 1179:ff00
Softmodem codec or chipset from diagnostics: 0x11c11040
from Archives:
The HDA card softmodem chip is 0x11c11040
Support type needed or chipset: 11c11040
----------------end Softmodem section --------------
Writing DOCs/Intel.txt
Vendor 11c1 is Lucent Technologies with modem technology now under LSI Inc.
Their Linux code developer/maintainer is Soumyendu Sarkar. Support for a chipset and its
continued maintenance is only initiated at the request of a major chipset buyer,
or comparable sponsor. Several different modem chipset types are produced:
with varying support under Linux.
Device ID Support Name Comment
--------- ------------- ----------- -----------------------------
0480 serial_drivers Venus controller chipset 1673JV7
0440-045d martian Mars/Apollo DSP (digital signal processing) chipsets
0462 none 56K.V90/ADSL Wildwire
048d none SV2P soft modem
048(c or f) AGRSM SV2P soft modem
0600 none soft modem, very few in the field.
0620 AGRSM Pinball soft modem, in some HP desktop PCs
011c11040 AGRSM hosted on High Definition Audio cards
062(1-3) none SV92PP,Pinball soft modem, in some HP desktop PCs
martian - At http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
AGRSM - At http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Compiling resources for a driver module pair: agrmodem.ko + agrserial.ko
Use the agrsm-HDA-20080721-ALSA15.tar.bz2 or agrsm-HDA-20080721.tar.bz2
Read the agrsm_howto.txt. For 11c11040 chips, also the HOWTO-Agere-11c11040-HDA.html
The AGRSM code package is not yet functionally on x86_64 systems, except in Intel architecture
emulation mode. This is because there is a 32 bit encypted component, precompiled at LSI/Agere Inc. It cannot be functionally linked with other 64 bit components compiled on a x86_64 system.
When/if LSI Inc. provides the encypted component in 64 bit format, service will be possible.
-------------- end Agere Systems section -------------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.27-9-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 317184 2008-10-15 21:16 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 wlan0 wmaster0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
A modem device/card may be disabled at bootup, due to a variety of causes.
Look at the bootup diagnostics record dmesg.txt and try to garner some
understanding from it. Attach it to your query to discuss@xxxxxxxxxxxxx
Possibilities therein are too diverse to be automagically processed by
scanModem. A line including the PCI
bus slot 00:1b.0 of your modem, and "disable" or "disabling" predicts problems,
though sometimes corrected later in the bootup. Similarly a line with "@"
in the interrupt (IRQ) for your 00:1b.0 slot is predictive of problems.
Possible corrections are:
1) Within the boot up BIOS, change from a Windows to a non-PNP/Other Operating System type.
Instructions for accessing BIOS are at:
http://linmodems.technion.ac.il/resources.html within: Additional Resourcces.
2a) Add an option "pci=routeirq" to the kernel boot up line.
Here is an example paragraph from /boot/grub/menu.lst :
title Ubuntu, kernel 2.6.15-26-686
root (hd0,6)
kernel /boot/vmlinuz-2.6.15-26-686 root=/dev/hda7 ro pci=routeirq
initrd /boot/initrd.img-2.6.15-26-686
savedefault
2b) Same as above, but use "pollirq" instead of "pci=routeirq".
3) Within some BIOS setups, IRQ assignments can be changed.
4) On non-laptop systems, moving the modem card to another slot has helped.
5) Blacklist as many drivers as possible. See
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg01593.html
6) Sometimes upgrading the kernel solves the problem.
7) Sometimes downgrading the kernel solves the problem.
8) Sometimes changing the Linux distribution solves the problem.
9) Get unloading.gz from http://linmodems.technion.ac.il/linmodems/
This script unloads excess drivers which may be competing for resources.
Before trying to set up the modem, do:
$ gunzip unloading.gz
$ chmod +x unloading
$ su - root
# ./unloading
Or for Ubuntu related Distros
$ sudo ./unloading
CPU0 CPU1
0: 1630982 25769 IO-APIC-edge timer
1: 2644 9 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc0
9: 21132 726 IO-APIC-fasteoi acpi
12: 107747 723 IO-APIC-edge i8042
14: 70178 1222 IO-APIC-edge ata_piix
15: 0 0 IO-APIC-edge ata_piix
16: 1472662 9189 IO-APIC-fasteoi uhci_hcd:usb1, yenta, i915@pci:0000:00:02.0
17: 4 1 IO-APIC-fasteoi ohci1394
18: 1293 51 IO-APIC-fasteoi ehci_hcd:usb3, uhci_hcd:usb6, tifm_7xx1, ath, mmc0
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb5
21: 5 4 IO-APIC-fasteoi uhci_hcd:usb2
22: 7320 580783 IO-APIC-fasteoi HDA Intel
23: 90131 0 IO-APIC-fasteoi uhci_hcd:usb4, ehci_hcd:usb7
2297: 71949 32165 PCI-MSI-edge ahci
2298: 0 0 PCI-MSI-edge eth0
NMI: 0 0 Non-maskable interrupts
LOC: 348070 1022139 Local timer interrupts
RES: 805026 901465 Rescheduling interrupts
CAL: 262305 177242 function call interrupts
TLB: 2841 2941 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
SPU: 0 0 Spurious interrupts
ERR: 1
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-9-generic (buildd@yellow) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 22:15:32 UTC 2008 (Ubuntu 2.6.27-9.19-generic)
[ 0.000000] Command line: root=UUID=796c82c6-d54f-4ef3-a4a7-d0a711c3afd6 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable)
[ 0.000000] BIOS-e820: 00000000bf6d0000 - 00000000bf6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6e3000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0xbf6d0 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf6d0000 page 4k
[ 0.000000] kernel direct mapping tables up to bf6d0000 @ 8000-d000
[ 0.000000] last_map_addr: bf6d0000 end: bf6d0000
[ 0.000000] RAMDISK: 377ab000 - 37fef928
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F7110, 0024 (r2 TOSCPL)
[ 0.000000] ACPI: XSDT BF6D79F1, 009C (r1 TOSCPL TOSCPL00 6040000 LTP 0)
[ 0.000000] ACPI: FACP BF6DFB60, 00F4 (r3 TOSCPL CRESTLNE 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT BF6D8E1A, 6CD2 (r2 TOSCPL CRESTLNE 6040000 INTL 20060608)
[ 0.000000] ACPI: FACS BF6E2FC0, 0040
[ 0.000000] ACPI: APIC BF6DFC54, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET BF6DFCBC, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG BF6DFCF4, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: TCPA BF6DFD30, 0032 (r1 Intel CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: TMOR BF6DFD62, 0026 (r1 PTLTD 6040000 PTL 3)
[ 0.000000] ACPI: SLIC BF6DFD88, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0)
[ 0.000000] ACPI: OSFR BF6DFEFE, 0072 (r1 TOSHIB A+2nd ID 6040000 TASM 4010000)
[ 0.000000] ACPI: APIC BF6DFF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT BF6DFFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT BF6D8B6D, 02AD (r1 SataRe SataAhci 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT BF6D8ACA, 00A3 (r1 BrtRef DD01BRT 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT BF6D8019, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT BF6D7F73, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT BF6D7A8D, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx
[ 0.000000] ACPI: DMI detected: Toshiba
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bf6d0000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000bf6d0000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
[ 0.000000] bootmap [000000000000b000 - 0000000000022edf] pages 18
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00bf6d0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00008b8f9c] TEXT DATA BSS ==> [0000200000 - 00008b8f9c]
[ 0.000000] #3 [00377ab000 - 0037fef928] RAMDISK ==> [00377ab000 - 0037fef928]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000f7190] 000f7190
[ 0.000000] [ffffe20000000000-ffffe20002ffffff] PMD -> [ffff880001200000-ffff8800041fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf6d0
[ 0.000000] On node 0 totalpages: 783983
[ 0.000000] DMA zone: 2111 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 767796 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 769907
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=796c82c6-d54f-4ef3-a4a7-d0a711c3afd6 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 1861.968 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 3071076k/3136320k available (3112k kernel code, 64856k reserved, 1575k data, 536k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.93 BogoMIPS (lpj=7447872)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005255] Mount-cache hash table entries: 256
[ 0.005500] Initializing cgroup subsys ns
[ 0.005508] Initializing cgroup subsys cpuacct
[ 0.005511] Initializing cgroup subsys memory
[ 0.005530] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.005532] CPU: L2 cache: 1024K
[ 0.005536] CPU 0/0 -> Node 0
[ 0.005537] CPU: Physical Processor ID: 0
[ 0.005539] CPU: Processor Core ID: 0
[ 0.005547] CPU0: Thermal monitoring handled by SMI
[ 0.005549] using mwait in idle threads.
[ 0.008021] ACPI: Core revision 20080609
[ 0.010869] ACPI: Checking initramfs for custom DSDT
[ 0.424535] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.464417] CPU0: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
[ 0.464421] Using local APIC timer interrupts.
[ 0.468030] APIC timer calibration result 8312394
[ 0.468032] Detected 8.312 MHz APIC timer.
[ 0.468197] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3723.97 BogoMIPS (lpj=7447948)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.556375] CPU1: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
[ 0.556403] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.560072] Brought up 2 CPUs
[ 0.560075] Total of 2 processors activated (7447.91 BogoMIPS).
[ 0.560131] CPU0 attaching sched-domain:
[ 0.560134] domain 0: span 0-1 level MC
[ 0.560137] groups: 0 1
[ 0.560140] domain 1: span 0-1 level NODE
[ 0.560143] groups: 0-1
[ 0.560147] CPU1 attaching sched-domain:
[ 0.560149] domain 0: span 0-1 level MC
[ 0.560151] groups: 1 0
[ 0.560154] domain 1: span 0-1 level NODE
[ 0.560156] groups: 0-1
[ 0.560257] net_namespace: 1552 bytes
[ 0.560257] Booting paravirtualized kernel on bare hardware
[ 0.560337] Time: 18:27:46 Date: 12/07/08
[ 0.560372] NET: Registered protocol family 16
[ 0.560397] ACPI: bus type pci registered
[ 0.560397] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.560397] PCI: MCFG area at e0000000 reserved in E820
[ 0.570966] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.570968] PCI: Using configuration type 1 for base access
[ 0.573114] ACPI: EC: Look up EC in DSDT
[ 0.580107] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 0.581049] ACPI: Interpreter enabled
[ 0.581052] ACPI: (supports S0 S3 S4 S5)
[ 0.581068] ACPI: Using IOAPIC for interrupt routing
[ 0.584090] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.656490] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.656490] ACPI: EC: driver started in interrupt mode
[ 0.656490] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.656490] PCI: 0000:00:02.0 reg 10 64bit mmio: [fc000000, fc0fffff]
[ 0.656490] PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff]
[ 0.656490] PCI: 0000:00:02.0 reg 20 io port: [1800, 1807]
[ 0.656490] PCI: 0000:00:02.1 reg 10 64bit mmio: [fc100000, fc1fffff]
[ 0.656490] PCI: 0000:00:1a.0 reg 20 io port: [1820, 183f]
[ 0.656490] PCI: 0000:00:1a.1 reg 20 io port: [1840, 185f]
[ 0.656490] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fc504800, fc504bff]
[ 0.656514] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.656520] pci 0000:00:1a.7: PME# disabled
[ 0.656572] PCI: 0000:00:1b.0 reg 10 64bit mmio: [fc500000, fc503fff]
[ 0.656630] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.656635] pci 0000:00:1b.0: PME# disabled
[ 0.656714] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.656719] pci 0000:00:1c.0: PME# disabled
[ 0.656796] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.656802] pci 0000:00:1c.1: PME# disabled
[ 0.656879] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.656884] pci 0000:00:1c.2: PME# disabled
[ 0.656962] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.656967] pci 0000:00:1c.3: PME# disabled
[ 0.657045] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.657050] pci 0000:00:1c.4: PME# disabled
[ 0.657104] PCI: 0000:00:1d.0 reg 20 io port: [1860, 187f]
[ 0.657175] PCI: 0000:00:1d.1 reg 20 io port: [1880, 189f]
[ 0.657245] PCI: 0000:00:1d.2 reg 20 io port: [18a0, 18bf]
[ 0.657321] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fc504c00, fc504fff]
[ 0.657383] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.657389] pci 0000:00:1d.7: PME# disabled
[ 0.657566] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.657570] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.657602] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
[ 0.657611] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[ 0.657619] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
[ 0.657627] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
[ 0.657635] PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f]
[ 0.657716] PCI: 0000:00:1f.2 reg 10 io port: [1c00, 1c07]
[ 0.657725] PCI: 0000:00:1f.2 reg 14 io port: [18d4, 18d7]
[ 0.657733] PCI: 0000:00:1f.2 reg 18 io port: [18d8, 18df]
[ 0.657742] PCI: 0000:00:1f.2 reg 1c io port: [18d0, 18d3]
[ 0.657750] PCI: 0000:00:1f.2 reg 20 io port: [18e0, 18ff]
[ 0.657759] PCI: 0000:00:1f.2 reg 24 32bit mmio: [fc504000, fc5047ff]
[ 0.657795] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.657800] pci 0000:00:1f.2: PME# disabled
[ 0.657824] PCI: 0000:00:1f.3 reg 10 32bit mmio: [0, ff]
[ 0.657851] PCI: 0000:00:1f.3 reg 20 io port: [1c20, 1c3f]
[ 0.657946] PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
[ 0.657951] PCI: bridge 0000:00:1c.0 32bit mmio: [f0000000, f3ffffff]
[ 0.657959] PCI: bridge 0000:00:1c.0 64bit mmio pref: [ce000000, cfffffff]
[ 0.658044] PCI: 0000:04:00.0 reg 10 io port: [3000, 30ff]
[ 0.658076] PCI: 0000:04:00.0 reg 18 64bit mmio: [f4000000, f4000fff]
[ 0.658108] PCI: 0000:04:00.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.658138] pci 0000:04:00.0: supports D1
[ 0.658139] pci 0000:04:00.0: supports D2
[ 0.658141] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.658148] pci 0000:04:00.0: PME# disabled
[ 0.658205] PCI: bridge 0000:00:1c.1 io port: [3000, 3fff]
[ 0.658211] PCI: bridge 0000:00:1c.1 32bit mmio: [f4000000, f7ffffff]
[ 0.658219] PCI: bridge 0000:00:1c.1 64bit mmio pref: [cc000000, cdffffff]
[ 0.658298] PCI: 0000:05:00.0 reg 10 64bit mmio: [f8000000, f800ffff]
[ 0.658439] PCI: bridge 0000:00:1c.2 io port: [4000, 4fff]
[ 0.658445] PCI: bridge 0000:00:1c.2 32bit mmio: [f8000000, fbffffff]
[ 0.658453] PCI: bridge 0000:00:1c.2 64bit mmio pref: [ca000000, cbffffff]
[ 0.658521] PCI: bridge 0000:00:1c.3 io port: [5000, 5fff]
[ 0.658525] PCI: bridge 0000:00:1c.3 32bit mmio: [c4000000, c7ffffff]
[ 0.658534] PCI: bridge 0000:00:1c.3 64bit mmio pref: [c8000000, c9ffffff]
[ 0.658671] PCI: 0000:0c:04.0 reg 10 32bit mmio: [fc204000, fc204fff]
[ 0.658694] pci 0000:0c:04.0: supports D1
[ 0.658696] pci 0000:0c:04.0: supports D2
[ 0.658698] pci 0000:0c:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.658704] pci 0000:0c:04.0: PME# disabled
[ 0.658750] PCI: 0000:0c:04.1 reg 10 32bit mmio: [fc206000, fc2067ff]
[ 0.658760] PCI: 0000:0c:04.1 reg 14 32bit mmio: [fc200000, fc203fff]
[ 0.658823] pci 0000:0c:04.1: supports D1
[ 0.658825] pci 0000:0c:04.1: supports D2
[ 0.658826] pci 0000:0c:04.1: PME# supported from D0 D1 D2 D3hot
[ 0.658832] pci 0000:0c:04.1: PME# disabled
[ 0.658878] PCI: 0000:0c:04.2 reg 10 32bit mmio: [fc205000, fc205fff]
[ 0.658947] pci 0000:0c:04.2: supports D1
[ 0.658949] pci 0000:0c:04.2: supports D2
[ 0.658951] pci 0000:0c:04.2: PME# supported from D0 D1 D2 D3hot
[ 0.658956] pci 0000:0c:04.2: PME# disabled
[ 0.660046] PCI: 0000:0c:04.3 reg 10 32bit mmio: [fc206800, fc2068ff]
[ 0.660117] pci 0000:0c:04.3: supports D1
[ 0.660118] pci 0000:0c:04.3: supports D2
[ 0.660120] pci 0000:0c:04.3: PME# supported from D0 D1 D2 D3hot
[ 0.660126] pci 0000:0c:04.3: PME# disabled
[ 0.660191] pci 0000:00:1e.0: transparent bridge
[ 0.660199] PCI: bridge 0000:00:1e.0 32bit mmio: [fc200000, fc2fffff]
[ 0.660281] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.660806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.660983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.661160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.661336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.661512] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.661709] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.676806] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.676806] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.676806] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.680132] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.680280] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.680428] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.680576] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.680723] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.680808] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.680808] pnp: PnP ACPI init
[ 0.680808] ACPI: bus type pnp registered
[ 0.704141] pnp: PnP ACPI: found 10 devices
[ 0.704143] ACPI: ACPI bus type pnp unregistered
[ 0.704166] PCI: Using ACPI for IRQ routing
[ 0.716060] NET: Registered protocol family 8
[ 0.716062] NET: Registered protocol family 20
[ 0.716078] NetLabel: Initializing
[ 0.716078] NetLabel: domain hash size = 128
[ 0.716078] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.716078] NetLabel: unlabeled traffic allowed by default
[ 0.716090] PCI-GART: No AMD northbridge found.
[ 0.716097] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.716101] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.718545] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[ 0.718547] actual entries 65586
[ 0.718678] AppArmor: AppArmor Filesystem Enabled
[ 0.718709] ACPI: RTC can wake from S4
[ 0.720041] Switched to high resolution mode on CPU 0
[ 0.720434] Switched to high resolution mode on CPU 1
[ 0.728029] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 0.728032] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 0.728035] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 0.728037] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 0.728040] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.728043] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 0.728045] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[ 0.728048] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 0.728057] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 0.728069] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.728071] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.728074] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.728076] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.728079] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 0.728082] system 00:06: ioport range 0xff00-0xff7f has been reserved
[ 0.733290] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.733295] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.733302] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf3ffffff
[ 0.733307] pci 0000:00:1c.0: PREFETCH window: 0x000000ce000000-0x000000cfffffff
[ 0.733317] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.733320] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.733327] pci 0000:00:1c.1: MEM window: 0xf4000000-0xf7ffffff
[ 0.733332] pci 0000:00:1c.1: PREFETCH window: 0x000000cc000000-0x000000cdffffff
[ 0.733341] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[ 0.733345] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.733352] pci 0000:00:1c.2: MEM window: 0xf8000000-0xfbffffff
[ 0.733357] pci 0000:00:1c.2: PREFETCH window: 0x000000ca000000-0x000000cbffffff
[ 0.733366] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[ 0.733369] pci 0000:00:1c.3: IO window: 0x5000-0x5fff
[ 0.733376] pci 0000:00:1c.3: MEM window: 0xc4000000-0xc7ffffff
[ 0.733381] pci 0000:00:1c.3: PREFETCH window: 0x000000c8000000-0x000000c9ffffff
[ 0.733390] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09
[ 0.733392] pci 0000:00:1c.4: IO window: disabled
[ 0.733398] pci 0000:00:1c.4: MEM window: disabled
[ 0.733403] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.733415] pci 0000:0c:04.0: CardBus bridge, secondary bus 0000:0d
[ 0.733417] pci 0000:0c:04.0: IO window: 0x006000-0x0060ff
[ 0.733423] pci 0000:0c:04.0: IO window: 0x006400-0x0064ff
[ 0.733428] pci 0000:0c:04.0: PREFETCH window: 0x100000000-0x103ffffff
[ 0.733434] pci 0000:0c:04.0: MEM window: 0x104000000-0x107ffffff
[ 0.733440] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
[ 0.733443] pci 0000:00:1e.0: IO window: 0x6000-0x6fff
[ 0.733450] pci 0000:00:1e.0: MEM window: 0xfc200000-0xfc2fffff
[ 0.733456] pci 0000:00:1e.0: PREFETCH window: 0x00000100000000-0x00000103ffffff
[ 0.733481] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.733487] pci 0000:00:1c.0: setting latency timer to 64
[ 0.733498] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.733503] pci 0000:00:1c.1: setting latency timer to 64
[ 0.733514] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.733520] pci 0000:00:1c.2: setting latency timer to 64
[ 0.733531] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.733536] pci 0000:00:1c.3: setting latency timer to 64
[ 0.733546] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.733551] pci 0000:00:1c.4: setting latency timer to 64
[ 0.733561] pci 0000:00:1e.0: setting latency timer to 64
[ 0.733572] pci 0000:0c:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.733579] bus: 00 index 0 io port: [0, ffff]
[ 0.733581] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 0.733583] bus: 02 index 0 io port: [2000, 2fff]
[ 0.733585] bus: 02 index 1 mmio: [f0000000, f3ffffff]
[ 0.733587] bus: 02 index 2 mmio: [ce000000, cfffffff]
[ 0.733589] bus: 02 index 3 mmio: [0, 0]
[ 0.733590] bus: 04 index 0 io port: [3000, 3fff]
[ 0.733592] bus: 04 index 1 mmio: [f4000000, f7ffffff]
[ 0.733594] bus: 04 index 2 mmio: [cc000000, cdffffff]
[ 0.733596] bus: 04 index 3 mmio: [0, 0]
[ 0.733597] bus: 05 index 0 io port: [4000, 4fff]
[ 0.733599] bus: 05 index 1 mmio: [f8000000, fbffffff]
[ 0.733601] bus: 05 index 2 mmio: [ca000000, cbffffff]
[ 0.733603] bus: 05 index 3 mmio: [0, 0]
[ 0.733604] bus: 06 index 0 io port: [5000, 5fff]
[ 0.733606] bus: 06 index 1 mmio: [c4000000, c7ffffff]
[ 0.733608] bus: 06 index 2 mmio: [c8000000, c9ffffff]
[ 0.733610] bus: 06 index 3 mmio: [0, 0]
[ 0.733611] bus: 09 index 0 mmio: [0, 0]
[ 0.733613] bus: 09 index 1 mmio: [0, 0]
[ 0.733614] bus: 09 index 2 mmio: [0, 0]
[ 0.733616] bus: 09 index 3 mmio: [0, 0]
[ 0.733618] bus: 0c index 0 io port: [6000, 6fff]
[ 0.733619] bus: 0c index 1 mmio: [fc200000, fc2fffff]
[ 0.733621] bus: 0c index 2 mmio: [100000000, 103ffffff]
[ 0.733623] bus: 0c index 3 io port: [0, ffff]
[ 0.733625] bus: 0c index 4 mmio: [0, ffffffffffffffff]
[ 0.733627] bus: 0d index 0 io port: [6000, 60ff]
[ 0.733628] bus: 0d index 1 io port: [6400, 64ff]
[ 0.733630] bus: 0d index 2 mmio: [100000000, 103ffffff]
[ 0.733632] bus: 0d index 3 mmio: [104000000, 107ffffff]
[ 0.733647] NET: Registered protocol family 2
[ 0.772190] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.773968] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.779936] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.780680] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.780684] TCP reno registered
[ 0.792150] NET: Registered protocol family 1
[ 0.792293] checking if image is initramfs... it is
[ 1.628297] Freeing initrd memory: 8466k freed
[ 1.634318] Simple Boot Flag at 0x36 set to 0x1
[ 1.635377] audit: initializing netlink socket (disabled)
[ 1.635401] type=2000 audit(1228674466.632:1): initialized
[ 1.641912] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.644496] VFS: Disk quotas dquot_6.5.1
[ 1.644600] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.644715] msgmni has been set to 6014
[ 1.644849] io scheduler noop registered
[ 1.644851] io scheduler anticipatory registered
[ 1.644853] io scheduler deadline registered
[ 1.644992] io scheduler cfq registered (default)
[ 1.645015] pci 0000:00:02.0: Boot video device
[ 1.645304] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.645358] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.645415] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.645461] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.645503] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.645629] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.645682] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.645734] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.645777] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.645818] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.645939] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.645991] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.646044] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.646089] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.646133] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.646256] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.646308] pcieport-driver 0000:00:1c.3: found MSI capability
[ 1.646361] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 1.646402] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 1.646447] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 1.646567] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 1.646619] pcieport-driver 0000:00:1c.4: found MSI capability
[ 1.646672] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 1.646714] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 1.646757] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 1.685982] hpet_resources: 0xfed00000 is busy
[ 1.686059] Linux agpgart interface v0.103
[ 1.686063] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.688423] brd: module loaded
[ 1.688496] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.688630] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.723350] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.723358] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.740159] mice: PS/2 mouse device common for all mice
[ 1.740310] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.740350] rtc0: alarms up to one month, y3k, hpet irqs
[ 1.740391] cpuidle: using governor ladder
[ 1.740394] cpuidle: using governor menu
[ 1.740791] TCP cubic registered
[ 1.741045] registered taskstats version 1
[ 1.741193] Magic number: 4:398:493
[ 1.741369] rtc_cmos 00:07: setting system clock to 2008-12-07 18:27:47 UTC (1228674467)
[ 1.741372] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.741374] EDD information not available.
[ 1.741428] Freeing unused kernel memory: 536k freed
[ 1.741665] Write protecting the kernel read-only data: 4348k
[ 1.761945] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.868100] fuse init (API version 7.9)
[ 1.996633] ACPI: SSDT BF6D8788, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 1.997181] ACPI: SSDT BF6D8278, 048B (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 2.000134] Monitor-Mwait will be used to enter C-1 state
[ 2.000137] Monitor-Mwait will be used to enter C-2 state
[ 2.004109] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 2.004179] processor ACPI0007:00: registered as cooling_device0
[ 2.004184] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.004892] Marking TSC unstable due to TSC halts in idle
[ 2.005654] ACPI: SSDT BF6D8A02, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 2.006153] ACPI: SSDT BF6D8703, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 2.036194] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 2.036263] processor ACPI0007:01: registered as cooling_device1
[ 2.036267] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.381827] usbcore: registered new interface driver usbfs
[ 2.381865] usbcore: registered new interface driver hub
[ 2.392874] usbcore: registered new device driver usb
[ 2.401154] USB Universal Host Controller Interface driver v3.0
[ 2.401217] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.401229] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.401233] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.401298] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.401348] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 2.401542] usb usb1: configuration #1 chosen from 1 choice
[ 2.401575] hub 1-0:1.0: USB hub found
[ 2.401584] hub 1-0:1.0: 2 ports detected
[ 2.477574] No dock devices found.
[ 2.504058] SCSI subsystem initialized
[ 2.513338] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.513350] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.513355] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.513385] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 2.513429] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 2.513550] usb usb2: configuration #1 chosen from 1 choice
[ 2.513580] hub 2-0:1.0: USB hub found
[ 2.513589] hub 2-0:1.0: 2 ports detected
[ 2.532454] libata version 3.00 loaded.
[ 2.721506] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.721531] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.721536] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.721579] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 2.725513] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.725522] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.725550] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc504800
[ 2.836189] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 2.845112] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.845278] usb usb3: configuration #1 chosen from 1 choice
[ 2.845313] hub 3-0:1.0: USB hub found
[ 2.845323] hub 3-0:1.0: 4 ports detected
[ 2.904176] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 3.053649] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.053665] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.053670] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.053718] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 3.053766] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 3.053941] usb usb4: configuration #1 chosen from 1 choice
[ 3.053979] hub 4-0:1.0: USB hub found
[ 3.053988] hub 4-0:1.0: 2 ports detected
[ 3.156355] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.156368] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.156372] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.156402] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 3.156446] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 3.156565] usb usb5: configuration #1 chosen from 1 choice
[ 3.156599] hub 5-0:1.0: USB hub found
[ 3.156607] hub 5-0:1.0: 2 ports detected
[ 3.168047] usb 3-3: new high speed USB device using ehci_hcd and address 2
[ 3.261342] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.261353] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.261357] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.261392] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 3.261425] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 3.261536] usb usb6: configuration #1 chosen from 1 choice
[ 3.261578] hub 6-0:1.0: USB hub found
[ 3.261586] hub 6-0:1.0: 2 ports detected
[ 3.310244] usb 3-3: configuration #1 chosen from 1 choice
[ 3.364503] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.364522] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.364526] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.364559] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 3.368477] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.368484] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.368493] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
[ 3.381025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.381181] usb usb7: configuration #1 chosen from 1 choice
[ 3.381217] hub 7-0:1.0: USB hub found
[ 3.381225] hub 7-0:1.0: 6 ports detected
[ 3.487191] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.487222] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.487246] r8169 0000:04:00.0: setting latency timer to 64
[ 3.487645] eth0: RTL8101e at 0xffffc20000652000, 00:1e:ec:3f:02:0d, XID 34200000 IRQ 2298
[ 3.488723] ahci 0000:00:1f.2: version 3.0
[ 3.488742] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.488881] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 3.488885] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 3.488891] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.489256] scsi0 : ahci
[ 3.489419] scsi1 : ahci
[ 3.489526] scsi2 : ahci
[ 3.489652] ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 2297
[ 3.489656] ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 2297
[ 3.489659] ata3: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504200 irq 2297
[ 4.144062] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.144734] ata1.00: _GTF unexpected object type 0x1
[ 4.516676] ata1.00: ATA-8: TOSHIBA MK2046GSX, LB013M, max UDMA/100
[ 4.516680] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.517662] ata1.00: _GTF unexpected object type 0x1
[ 4.517790] ata1.00: configured for UDMA/100
[ 4.852046] ata2: SATA link down (SStatus 0 SControl 300)
[ 5.188048] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.204168] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2046GS LB01 PQ: 0 ANSI: 5
[ 5.204345] ohci1394 0000:0c:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.254125] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc206000-fc2067ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 5.258196] ata_piix 0000:00:1f.1: version 2.12
[ 5.258213] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.258261] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 5.258377] scsi3 : ata_piix
[ 5.258682] scsi4 : ata_piix
[ 5.259575] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 5.259578] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 5.267819] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.281978] Driver 'sd' needs updating - please use bus_type methods
[ 5.282106] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 5.282126] sd 0:0:0:0: [sda] Write Protect is off
[ 5.282128] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.282160] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.282235] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 5.282253] sd 0:0:0:0: [sda] Write Protect is off
[ 5.282255] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.282288] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.282292] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 5.402688] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.424498] ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.40, max UDMA/33
[ 5.440418] ata4.00: configured for UDMA/33
[ 5.611388] isa bounce pool size: 16 pages
[ 5.613508] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.40 PQ: 0 ANSI: 5
[ 5.613725] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[ 5.636872] Driver 'sr' needs updating - please use bus_type methods
[ 5.644173] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.644179] Uniform CD-ROM driver Revision: 3.20
[ 5.644310] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 5.941183] PM: Starting manual resume from disk
[ 5.941187] PM: Resume from partition 8:6
[ 5.941188] PM: Checking hibernation image.
[ 5.941358] PM: Resume from disk failed.
[ 5.998276] kjournald starting. Commit interval 5 seconds
[ 5.998309] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.528168] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f88ad4024be]
[ 11.549183] udevd version 124 started
[ 11.859906] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.895205] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.019925] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 12.020311] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 12.036923] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 12.092611] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 12.124061] ACPI: Power Button (FF) [PWRF]
[ 12.124198] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 12.124289] ACPI: Lid Switch [LID0]
[ 12.124375] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 12.156068] ACPI: Power Button (CM) [PWRB]
[ 12.362788] Yenta: CardBus bridge found at 0000:0c:04.0 [1179:ff00]
[ 12.362813] Yenta: Enabling burst memory read transactions
[ 12.362819] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 12.362821] Yenta: Routing CardBus interrupts to PCI
[ 12.362827] Yenta TI: socket 0000:0c:04.0, mfunc 0x10a01b22, devctl 0x64
[ 12.393722] ACPI: AC Adapter [ACAD] (on-line)
[ 12.407436] acpi device:05: registered as cooling_device2
[ 12.407790] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input5
[ 12.424065] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 12.424857] cfg80211: Using static regulatory domain info
[ 12.424860] cfg80211: Regulatory domain: US
[ 12.424861] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.424864] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 12.424866] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 12.424869] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 12.424871] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 12.424873] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 12.424875] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 12.424878] cfg80211: Calling CRDA for country: US
[ 12.433809] acpi device:0b: registered as cooling_device3
[ 12.434196] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/input/input6
[ 12.456046] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.597107] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[ 12.597112] Socket status: 30000006
[ 12.597115] Yenta: Raising subordinate bus# of parent bus (#0c) from #0d to #10
[ 12.597122] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[ 12.597125] pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff
[ 12.597127] pcmcia: parent PCI bridge Memory window: 0x100000000 - 0x103ffffff
[ 12.600723] ath5k_pci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.600739] ath5k_pci 0000:05:00.0: setting latency timer to 64
[ 12.600774] ath5k_pci 0000:05:00.0: registered as 'phy0'
[ 12.641830] ACPI: Battery Slot [BAT1] (battery present)
[ 12.664032] phy0: Selected rate control algorithm 'pid'
[ 12.902159] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 12.914745] Linux video capture interface: v2.00
[ 12.957824] iTCO_vendor_support: vendor-support=0
[ 12.998021] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 12.999062] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 12.999086] iTCO_wdt: No card detected
[ 13.023513] sdhci: Secure Digital Host Controller Interface driver
[ 13.023516] sdhci: Copyright(c) Pierre Ossman
[ 13.049685] tifm_7xx1 0000:0c:04.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 13.070753] sdhci-pci 0000:0c:04.3: SDHCI controller found [104c:803c] (rev 0)
[ 13.070777] sdhci-pci 0000:0c:04.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 13.071350] mmc0: SDHCI controller on PCI [0000:0c:04.3] using DMA
[ 13.075325] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 13.209001] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 13.209047] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.216082] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 13.218337] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.0/input/input8
[ 13.245790] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[ 13.360310] usbcore: registered new interface driver uvcvideo
[ 13.360333] USB Video Class driver (v0.1.0)
[ 13.728146] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
[ 13.813827] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[ 15.461563] lp: driver loaded but no devices found
[ 15.662970] Adding 4313412k swap on /dev/sda6. Priority:-1 extents:1 across:4313412k
[ 265.788117] EXT3 FS on sda5, internal journal
[ 266.701294] type=1505 audit(1228696332.422:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=7018
[ 266.761320] type=1505 audit(1228696332.482:3): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=7023
[ 266.920776] type=1505 audit(1228696332.642:4): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=7027
[ 266.921035] type=1505 audit(1228696332.642:5): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=7027
[ 267.031976] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 267.628558] ACPI: WMI: Mapper loaded
[ 268.497027] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 269.253634] ppdev: user-space parallel port driver
[ 271.341845] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 271.341864] vboxdrv: Successfully done.
[ 271.341868] vboxdrv: Found 2 processor cores.
[ 271.346653] vboxdrv: fAsync=0 offMin=0x3b8 offMax=0x1d18
[ 271.346672] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 271.346677] vboxdrv: Successfully loaded version 2.0.4_OSE (interface 0x00090000).
[ 271.966735] NET: Registered protocol family 10
[ 271.970435] lo: Disabled Privacy Extensions
[ 273.447751] Bluetooth: Core ver 2.13
[ 273.449022] NET: Registered protocol family 31
[ 273.449032] Bluetooth: HCI device and connection manager initialized
[ 273.449038] Bluetooth: HCI socket layer initialized
[ 273.521971] Bluetooth: L2CAP ver 2.11
[ 273.521982] Bluetooth: L2CAP socket layer initialized
[ 273.561562] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 273.561573] Bluetooth: BNEP filters: protocol multicast
[ 273.609172] Bridge firewalling registered
[ 273.609543] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 273.650889] Bluetooth: SCO (Voice Link) ver 0.6
[ 273.650901] Bluetooth: SCO socket layer initialized
[ 273.666141] Bluetooth: RFCOMM socket layer initialized
[ 273.666276] Bluetooth: RFCOMM TTY layer initialized
[ 273.666281] Bluetooth: RFCOMM ver 1.10
[ 277.480166] [drm] Initialized drm 1.1.0 20060810
[ 277.488317] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 277.488336] pci 0000:00:02.0: setting latency timer to 64
[ 277.488589] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 277.873926] r8169: eth0: link down
[ 277.876212] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 277.931791] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 278.049055] NET: Registered protocol family 17
[ 309.187290] CPU0 attaching NULL sched-domain.
[ 309.187318] CPU1 attaching NULL sched-domain.
[ 309.198425] CPU0 attaching sched-domain:
[ 309.198445] domain 0: span 0-1 level MC
[ 309.198450] groups: 0 1
[ 309.198460] domain 1: span 0-1 level NODE
[ 309.198465] groups: 0-1
[ 309.198475] CPU1 attaching sched-domain:
[ 309.198479] domain 0: span 0-1 level MC
[ 309.198484] groups: 1 0
[ 309.198491] domain 1: span 0-1 level NODE
[ 309.198496] groups: 0-1
[ 501.831472] PM: Syncing filesystems ... done.
[ 501.831531] PM: Preparing system for mem sleep
[ 501.831534] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 501.833183] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 501.833294] PM: Entering mem sleep
[ 501.833297] Suspending console(s) (use no_console_suspend to debug)
[ 501.834342] pci 0000:00:02.0: PCI INT A disabled
[ 501.852078] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 501.963573] sd 0:0:0:0: [sda] Stopping disk
[ 502.986297] ACPI handle has no context!
[ 502.986375] ACPI handle has no context!
[ 502.986383] sdhci-pci 0000:0c:04.3: PCI INT C disabled
[ 502.986390] ACPI handle has no context!
[ 503.000106] ACPI handle has no context!
[ 503.000113] tifm_7xx1 0000:0c:04.2: PCI INT C disabled
[ 503.000120] ACPI handle has no context!
[ 503.016104] ACPI handle has no context!
[ 503.032445] ath5k_pci 0000:05:00.0: PCI INT A disabled
[ 503.128253] ata_piix 0000:00:1f.1: PCI INT A disabled
[ 503.128564] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 503.144111] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 503.144199] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 503.144286] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 503.176064] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 503.192165] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 503.208111] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 503.208194] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 503.208318] PM: suspend devices took 1.376 seconds
[ 503.208458] ACPI: Preparing to enter system sleep state S3
[ 503.208706] Disabling non-boot CPUs ...
[ 503.312029] CPU 1 is now offline
[ 503.312033] SMP alternatives: switching to UP code
[ 503.321175] CPU0 attaching NULL sched-domain.
[ 503.321178] CPU1 attaching NULL sched-domain.
[ 503.332033] CPU0 attaching sched-domain:
[ 503.332036] domain 0: span 0 level NODE
[ 503.332038] groups: 0
[ 503.332383] CPU1 is down
[ 503.332556] Extended CMOS year: 2000
[ 503.332556] Back to C!
[ 503.332556] Extended CMOS year: 2000
[ 503.332556] Enabling non-boot CPUs ...
[ 503.332556] SMP alternatives: switching to SMP code
[ 503.342335] Booting processor 1/1 ip 6000
[ 503.212923] Initializing CPU#1
[ 503.212923] Calibrating delay using timer specific routine.. 3724.05 BogoMIPS (lpj=7448105)
[ 503.212923] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 503.212923] CPU: L2 cache: 1024K
[ 503.212923] CPU 1/1 -> Node 0
[ 503.212923] CPU: Physical Processor ID: 0
[ 503.212923] CPU: Processor Core ID: 1
[ 503.432422] CPU1: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
[ 503.432459] CPU0 attaching NULL sched-domain.
[ 503.436023] Switched to high resolution mode on CPU 1
[ 503.448024] CPU0 attaching sched-domain:
[ 503.448026] domain 0: span 0-1 level MC
[ 503.448028] groups: 0 1
[ 503.448032] domain 1: span 0-1 level NODE
[ 503.448033] groups: 0-1
[ 503.448036] CPU1 attaching sched-domain:
[ 503.448038] domain 0: span 0-1 level MC
[ 503.448039] groups: 1 0
[ 503.448041] domain 1: span 0-1 level NODE
[ 503.448043] groups: 0-1
[ 503.448628] CPU1 is up
[ 503.448630] ACPI: Waking up from system sleep state S3
[ 503.449340] APIC error on CPU1: 00(40)
[ 503.616894] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 503.768269] pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 503.768284] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900003)
[ 503.781711] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[ 503.781731] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 503.781736] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 503.781794] usb usb1: root hub lost power or was reset
[ 503.781817] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 503.781822] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 503.781878] usb usb2: root hub lost power or was reset
[ 503.796064] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 503.796069] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 503.812101] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[ 503.812123] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 503.812130] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 503.812185] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20002020, writing 0x2020)
[ 503.812199] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 503.812244] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 503.812278] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20003030, writing 0x3030)
[ 503.812291] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 503.812336] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 503.812369] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20004040, writing 0x4040)
[ 503.812383] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 503.812429] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 503.812471] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 503.812516] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 503.812548] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
[ 503.812562] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 503.812607] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 503.812616] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 503.812621] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 503.812678] usb usb4: root hub lost power or was reset
[ 503.812698] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 503.812703] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 503.812761] usb usb5: root hub lost power or was reset
[ 503.812781] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 503.812786] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 503.812842] usb usb6: root hub lost power or was reset
[ 503.828059] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 503.828064] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 503.828134] pci 0000:00:1e.0: restoring config space at offset 0xb (was 0x0, writing 0x1)
[ 503.828139] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0x0, writing 0x1)
[ 503.828144] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3f10001)
[ 503.828151] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x22806060)
[ 503.828157] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x200d0c00, writing 0x20100c00)
[ 503.828183] pci 0000:00:1e.0: setting latency timer to 64
[ 503.828267] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[ 503.828278] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 503.828283] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 503.844099] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 503.844143] ahci 0000:00:1f.2: setting latency timer to 64
[ 503.844266] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xc2000000)
[ 503.860092] r8169 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 503.860119] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf4000004)
[ 503.860129] r8169 0000:04:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x3001)
[ 503.860136] r8169 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 503.860145] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100507)
[ 503.860249] ath5k_pci 0000:05:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 503.860279] ath5k_pci 0000:05:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf8000004)
[ 503.860286] ath5k_pci 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 503.860295] ath5k_pci 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 503.876061] ath5k_pci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 503.901585] yenta_cardbus 0000:0c:04.0: restoring config space at offset 0xf (was 0x344010a, writing 0x5c0010a)
[ 503.901592] yenta_cardbus 0000:0c:04.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc)
[ 503.901598] yenta_cardbus 0000:0c:04.0: restoring config space at offset 0xd (was 0x0, writing 0x6400)
[ 503.901604] yenta_cardbus 0000:0c:04.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc)
[ 503.901610] yenta_cardbus 0000:0c:04.0: restoring config space at offset 0xb (was 0x0, writing 0x6000)
[ 503.901616] yenta_cardbus 0000:0c:04.0: restoring config space at offset 0xa (was 0x0, writing 0x7fff000)
[ 503.901622] yenta_cardbus 0000:0c:04.0: restoring config space at offset 0x9 (was 0x0, writing 0x4000000)
[ 503.901628] yenta_cardbus 0000:0c:04.0: restoring config space at offset 0x8 (was 0x0, writing 0x3fff000)
[ 503.901636] yenta_cardbus 0000:0c:04.0: restoring config space at offset 0x6 (was 0x40d0d0c, writing 0xb0100d0c)
[ 503.901646] yenta_cardbus 0000:0c:04.0: restoring config space at offset 0x3 (was 0x824010, writing 0x82a820)
[ 503.901654] yenta_cardbus 0000:0c:04.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007)
[ 503.996060] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 503.996063] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[ 504.001061] Clocksource tsc unstable (delta = -501046432 ns)
[ 504.012451] ata4.00: configured for UDMA/33
[ 504.105760] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc206000-fc2067ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 504.120060] tifm_7xx1 0000:0c:04.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x407030a)
[ 504.120086] tifm_7xx1 0000:0c:04.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc205000)
[ 504.120092] tifm_7xx1 0000:0c:04.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910)
[ 504.120100] tifm_7xx1 0000:0c:04.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[ 504.120117] tifm_7xx1 0000:0c:04.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 504.136063] sdhci-pci 0000:0c:04.3: restoring config space at offset 0xf (was 0x40703ff, writing 0x407030a)
[ 504.136089] sdhci-pci 0000:0c:04.3: restoring config space at offset 0x4 (was 0x0, writing 0xfc206800)
[ 504.136094] sdhci-pci 0000:0c:04.3: restoring config space at offset 0x3 (was 0x800000, writing 0x803910)
[ 504.136103] sdhci-pci 0000:0c:04.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[ 504.136120] sdhci-pci 0000:0c:04.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 504.176863] ata2: SATA link down (SStatus 0 SControl 300)
[ 504.176897] ata3: SATA link down (SStatus 0 SControl 300)
[ 504.284069] sd 0:0:0:0: [sda] Starting disk
[ 505.577091] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 505.577980] ata1.00: _GTF unexpected object type 0x1
[ 505.579072] ata1.00: _GTF unexpected object type 0x1
[ 505.579193] ata1.00: configured for UDMA/100
[ 505.592126] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 505.592149] sd 0:0:0:0: [sda] Write Protect is off
[ 505.592151] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 505.592188] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 505.612080] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 505.612086] pci 0000:00:02.0: setting latency timer to 64
[ 505.613889] PM: resume devices took 2.052 seconds
[ 505.613917] PM: Finishing wakeup.
[ 505.613919] Restarting tasks ... done.
[ 506.825061] r8169: eth0: link down
[ 506.826821] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 506.891566] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 626.608098] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 627.129095] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[ 627.129128] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LPCB.BAT1._BST] (Node ffff8800bee3c100), AE_TIME
[ 627.129265] ACPI Exception (battery-0360): AE_TIME, Evaluating _BST [20080609]
[ 865.804089] usb 7-2: new high speed USB device using ehci_hcd and address 2
[ 865.943580] usb 7-2: configuration #1 chosen from 1 choice
[ 866.054329] usbcore: registered new interface driver libusual
[ 866.068851] Initializing USB Mass Storage driver...
[ 866.069606] scsi5 : SCSI emulation for USB Mass Storage devices
[ 866.069906] usb-storage: device found at 2
[ 866.069912] usb-storage: waiting for device to settle before scanning
[ 866.069913] usbcore: registered new interface driver usb-storage
[ 866.069916] USB Mass Storage support registered.
[ 871.068431] usb-storage: device scan complete
[ 871.069246] scsi 5:0:0:0: Direct-Access JetFlash TS2GJFV30 8.07 PQ: 0 ANSI: 2
[ 871.075691] sd 5:0:0:0: [sdb] 4005888 512-byte hardware sectors (2051 MB)
[ 871.076571] sd 5:0:0:0: [sdb] Write Protect is off
[ 871.076585] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 871.076590] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 871.080376] sd 5:0:0:0: [sdb] 4005888 512-byte hardware sectors (2051 MB)
[ 871.082595] sd 5:0:0:0: [sdb] Write Protect is off
[ 871.082610] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 871.082616] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 871.083615] sdb: sdb1
[ 871.324068] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 871.325767] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1161.604023] usb 7-2: USB disconnect, address 2
[ 1365.097058] CE: hpet increasing min_delta_ns to 15000 nsec
[ 1549.626012] npviewer.bin[9911]: segfault at f5693030 ip 00000000f790d9f0 sp 00000000ffdc6184 error 4 in libpthread-2.8.90.so[f7906000+15000]
[ 2017.584084] usb 7-2: new high speed USB device using ehci_hcd and address 3
[ 2017.720306] usb 7-2: configuration #1 chosen from 1 choice
[ 2017.721928] scsi6 : SCSI emulation for USB Mass Storage devices
[ 2017.724302] usb-storage: device found at 3
[ 2017.724316] usb-storage: waiting for device to settle before scanning
[ 2022.725397] usb-storage: device scan complete
[ 2022.726326] scsi 6:0:0:0: Direct-Access JetFlash TS2GJFV30 8.07 PQ: 0 ANSI: 2
[ 2022.733042] sd 6:0:0:0: [sdb] 4005888 512-byte hardware sectors (2051 MB)
[ 2022.734151] sd 6:0:0:0: [sdb] Write Protect is off
[ 2022.734164] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 2022.734169] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2022.740904] sd 6:0:0:0: [sdb] 4005888 512-byte hardware sectors (2051 MB)
[ 2022.745169] sd 6:0:0:0: [sdb] Write Protect is off
[ 2022.745184] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 2022.745190] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2022.746211] sdb: sdb1
[ 2022.982947] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2022.983543] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2189.458577] usb 7-2: USB disconnect, address 3
[ 4232.608995] firefox[11247]: segfault at 7f6ac62c20ce ip 00007f6ac7329df1 sp 00007fffd044cbd0 error 4 in libc-2.8.90.so[7f6ac72f4000+169000]
[ 4548.400085] usb 7-2: new high speed USB device using ehci_hcd and address 4
[ 4548.536214] usb 7-2: configuration #1 chosen from 1 choice
[ 4548.537840] scsi7 : SCSI emulation for USB Mass Storage devices
[ 4548.540304] usb-storage: device found at 4
[ 4548.540319] usb-storage: waiting for device to settle before scanning
[ 4553.536411] usb-storage: device scan complete
[ 4553.537272] scsi 7:0:0:0: Direct-Access JetFlash TS2GJFV30 8.07 PQ: 0 ANSI: 2
[ 4553.554940] sd 7:0:0:0: [sdb] 4005888 512-byte hardware sectors (2051 MB)
[ 4553.558987] sd 7:0:0:0: [sdb] Write Protect is off
[ 4553.559003] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 4553.559008] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 4553.561927] sd 7:0:0:0: [sdb] 4005888 512-byte hardware sectors (2051 MB)
[ 4553.562548] sd 7:0:0:0: [sdb] Write Protect is off
[ 4553.562555] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 4553.562560] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 4553.562572] sdb: sdb1
[ 4553.762903] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 4553.763123] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 4576.280714] usb 7-2: USB disconnect, address 4
[ 5423.866623] firefox[11640]: segfault at 7ffddb78b0ce ip 00007ffddc7f2df1 sp 00007fffe59180a0 error 4 in libc-2.8.90.so[7ffddc7bd000+169000]
[ 5448.223512] firefox[11648]: segfault at 7f78e15340ce ip 00007f78e259bdf1 sp 00007fffeb6c0e50 error 4 in libc-2.8.90.so[7f78e2566000+169000]
[ 5473.433483] firefox[11656]: segfault at 7f4700c4a0ce ip 00007f4701cb1df1 sp 00007fff0add5510 error 4 in libc-2.8.90.so[7f4701c7c000+169000]
[ 6833.937907] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 6834.169058] usb 7-2: new high speed USB device using ehci_hcd and address 5
[ 6834.311071] usb 7-2: configuration #1 chosen from 1 choice
[ 6834.327640] scsi8 : SCSI emulation for USB Mass Storage devices
[ 6834.336187] usb-storage: device found at 5
[ 6834.336195] usb-storage: waiting for device to settle before scanning
[ 6839.339817] usb-storage: device scan complete
[ 6839.341087] scsi 8:0:0:0: Direct-Access JetFlash TS2GJFV30 8.07 PQ: 0 ANSI: 2
[ 6839.345882] sd 8:0:0:0: [sdb] 4005888 512-byte hardware sectors (2051 MB)
[ 6839.347648] sd 8:0:0:0: [sdb] Write Protect is off
[ 6839.347657] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 6839.347660] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 6839.351769] sd 8:0:0:0: [sdb] 4005888 512-byte hardware sectors (2051 MB)
[ 6839.353654] sd 8:0:0:0: [sdb] Write Protect is off
[ 6839.353662] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 6839.353666] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 6839.356498] sdb: sdb1
[ 6839.554102] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 6839.554498] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 6913.907186] firefox[12233]: segfault at 7fa3298260ce ip 00007fa32a88ddf1 sp 00007fff339b3140 error 4 in libc-2.8.90.so[7fa32a858000+169000]
Module Size Used by
nls_iso8859_1 13568 1
nls_cp437 15232 1
vfat 21120 1
fat 64824 1 vfat
usb_storage 92864 1
libusual 31784 1 usb_storage
af_packet 29568 2
i915 44544 2
drm 110304 3 i915
binfmt_misc 18700 1
rfcomm 51104 0
sco 20612 2
bridge 64544 0
stp 11268 1 bridge
bnep 23168 2
l2cap 33280 6 rfcomm,bnep
bluetooth 70820 6 rfcomm,sco,bnep,l2cap
ipv6 314312 14
vboxdrv 1653120 0
ppdev 16904 0
acpi_cpufreq 16400 1
cpufreq_stats 14468 0
cpufreq_conservative 16392 0
cpufreq_userspace 12420 0
cpufreq_ondemand 16400 1
freq_table 13568 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_powersave 10368 0
sbs 22288 0
sbshc 14592 1 sbs
container 12288 0
wmi 15808 0
pci_slot 13704 0
iptable_filter 11520 0
ip_tables 28176 1 iptable_filter
x_tables 31752 1 ip_tables
sbp2 32652 0
parport_pc 44200 0
lp 19588 0
parport 50096 3 ppdev,parport_pc,lp
joydev 20736 0
pcmcia 48408 0
uvcvideo 68616 0
snd_hda_intel 489264 5
psmouse 51612 0
compat_ioctl32 18176 1 uvcvideo
evdev 20512 13
snd_pcm_oss 52608 0
pcspkr 11136 0
sdhci_pci 17024 0
serio_raw 14596 0
tifm_7xx1 15104 0
snd_mixer_oss 25088 1 snd_pcm_oss
sdhci 27396 1 sdhci_pci
iTCO_wdt 21072 0
iTCO_vendor_support 12420 1 iTCO_wdt
videodev 46720 2 uvcvideo,compat_ioctl32
tifm_core 17864 1 tifm_7xx1
v4l1_compat 24580 2 uvcvideo,videodev
arc4 10368 2
mmc_core 67168 1 sdhci
ecb 11520 2
crypto_blkcipher 27780 1 ecb
snd_pcm 99208 3 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 11524 0
snd_seq_oss 42368 0
snd_seq_midi 15872 0
ath5k 115584 0
lbm_cw_mac80211 242360 1 ath5k
snd_rawmidi 34176 1 snd_seq_midi
battery 21128 0
snd_seq_midi_event 16768 2 snd_seq_oss,snd_seq_midi
lbm_cw_cfg80211 45088 2 ath5k,lbm_cw_mac80211
video 28948 0
ac 13448 0
yenta_socket 35084 1
snd_seq 67168 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
output 11776 1 video
rsrc_nonstatic 19328 1 yenta_socket
pcmcia_core 48804 3 pcmcia,yenta_socket,rsrc_nonstatic
led_class 13192 1 ath5k
snd_timer 34320 2 snd_pcm,snd_seq
snd_seq_device 16404 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 79432 18 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
button 15904 0
soundcore 16800 1 snd
intel_agp 39280 1
snd_page_alloc 17680 2 snd_hda_intel,snd_pcm
shpchp 42140 0
pci_hotplug 39472 1 shpchp
ext3 150544 1
jbd 66472 1 ext3
mbcache 17924 1 ext3
sr_mod 24644 0
cdrom 47784 1 sr_mod
pata_acpi 13568 0
sd_mod 45864 5
crc_t10dif 10240 1 sd_mod
sg 45408 0
ata_piix 29444 0
ahci 43148 2
ohci1394 41524 0
ata_generic 14212 0
ieee1394 110592 2 sbp2,ohci1394
libata 200160 4 pata_acpi,ata_piix,ahci,ata_generic
scsi_mod 183160 6 usb_storage,sbp2,sr_mod,sd_mod,sg,libata
dock 18464 1 libata
r8169 40196 0
ehci_hcd 48908 0
uhci_hcd 34336 0
usbcore 175376 6 usb_storage,libusual,uvcvideo,ehci_hcd,uhci_hcd
thermal 27424 0
processor 47800 4 acpi_cpufreq,thermal
fan 13576 0
fbcon 51200 0
tileblit 11264 1 fbcon
font 17152 1 fbcon
bitblit 14592 1 fbcon
softcursor 10496 1 bitblit
fuse 68288 3
