I remove /bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp uucp /dev/slamr0 from /etc/rc.d/init.d/slmodemd script . ---------------------------------------------- this terminal 1: [root@localhost ~]# chkconfig slmodemd off [root@localhost ~]# chkconfig slmodemd --list slmodemd 0:off 1:off 2:off 3:off 4:off 5:off 6:off [root@localhost ~]# '/etc/init.d/slmodemd' restart Starting SmartLink Modem driver for slamr0: [ OK ] [root@localhost ~]# modprobe ungrab-winmodem [root@localhost ~]# modprobe slamr [root@localhost ~]# ls /dev/slamr -l ls: cannot access /dev/slamr: No such file or directory [root@localhost ~]# ls /dev/slamr0 -l crw-rw---- 1 root uucp 242, 0 2007-06-18 23:39 /dev/slamr0 [root@localhost ~]# slmodemd -c USA /dev/slamr0 error: mdm setup: cannot open dev `/dev/slamr0': No such device error: cannot setup device `/dev/slamr0' [root@localhost ~]# dmesg | grep 'slamr' slamr: module license 'Smart Link Ltd.' taints kernel. slamr: SmartLink AMRMO modem. slamr: probe 2000:2800 \$ t$ |$ G0 card... slamr: cannot create card. slamr: probe of 0000:04:01.0 failed with error -12 [root@localhost ~]# ------------------------------------------------- this terminal 2: [root@localhost ~]# chkconfig slmodemd off [root@localhost ~]# chkconfig slmodemd --listslmodemd 0:off 1:off 2:off 3:off 4:off 5:off 6:off [root@localhost ~]# modprobe ungrab-winmodem [root@localhost ~]# modprobe slamr [root@localhost ~]# ls /dev/slamr -l ls: cannot access /dev/slamr: No such file or directory [root@localhost ~]# ls /dev/slamr0 -l crw-rw---- 1 root uucp 242, 0 2007-06-18 23:39 /dev/slamr0 [root@localhost ~]# slmodemd -c USA /dev/slamr0 error: mdm setup: cannot open dev `/dev/slamr0': No such device error: cannot setup device `/dev/slamr0' [root@localhost ~]# # dmesg | grep 'slamr' [root@localhost ~]# dmesg | grep 'slamr' slamr: module license 'Smart Link Ltd.' taints kernel. slamr: SmartLink AMRMO modem. slamr: probe 2000:2800 \$ t$ |$ G0 card... slamr: cannot create card. slamr: probe of 0000:04:01.0 failed with error -12 [root@localhost ~]# ------------------------------------------ at time terminal 1 , terminal 2 at above i open tab terminal this is resault that was same for terminal 1,2: [root@localhost ~]# wvdialconf /etc/wvdial.conf Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Port Scan<*1>: S2 S3 Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial? Please read the FAQ at http://open.nit.ca/wvdial/ If you still have problems, send mail to wvdial-list@xxxxxxxxxxxxx [root@localhost ~]# ------------------------------------------- i send two message that in it was [root@localhost ~]# ls /dev/slamr0 -l crw-rw---- 1 root uucp 242, 0 2007-06-18 23:39 /dev/slamr0 and another info i think that you are dont see it. please see them no what i do ?. --- On Sun, 7/12/08, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: > From: Antonio Olivares <olivares14031@xxxxxxxxx> > Subject: Re: my modem is smartHCF or smart link ltd how install it on fedora7 and fedora9? > To: hogat_allah_sh@xxxxxxxxx > Cc: olivares14031@xxxxxxxxx, discuss@xxxxxxxxxxxxx, marvin.stodolsky@xxxxxxxxx > Date: Sunday, 7 December, 2008, 7:39 PM > Hogat if you got it to work in /etc/modprobe.conf, then the > line > > /bin/mknod -m 660 /dev/slamr0 c 242 0 > 2>/dev/null && chgrp > uucp /dev/slamr0 > > is not needed in /etc/rc.d/init.d/slmodemd script. Try > removing that > line. Also please remove the service momemntarily. > (slmodemd service) > > $ su - > passwd: > # chkconfig slmodemd off > check that it is off > # chkconfig slmodemd --list > > then (try manually first) to make sure that it works, > otherwise we are > beating the head against the wall > > # modprobe ungrab-winmodem > # modprobe slamr > please do this also to make sure /dev/slamr0 exists :) > # ls /dev/slamr -l > > then do a > # slmodemd -c USA /dev/slamr0 > > leave that as is and open up a tab or another terminal then > do > $ su - > passwd: > # wvdialconf /etc/wvdial.conf > > if > # slmodedmd -c USA /dev/slamr0 does not work, then please > send output of > # dmesg | grep 'slamr' > > Regards, > > Antonio > > On 12/7/08, hogat allah shahamiri > <hogat_allah_sh@xxxxxxxxx> wrote: > > hi > > > > this is start() in the /etc/rc.d/init.d/slmodemd > : > > > > start() { > > modprobe ungrab-winmodem > > modprobe slamr > > /bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null > && chgrp uucp > > /dev/slamr0 > > echo -n "Starting SmartLink Modem driver for > $SLMODEMD_DEVICE: " > > $prog </dev/null >/dev/null 2>/dev/null > \ > > --country=$SLMODEMD_COUNTRY $SLMODEMD_OPTS > /dev/$SLMODEMD_DEVICE & > > RETVAL=$? > > [ $RETVAL -eq 0 ] && success $"$prog > startup" || failure $"$prog startup" > > echo > > [ $RETVAL -eq 0 ] && touch > /var/lock/subsys/$prog > > return $RETVAL > > } > > > > this is /etc/modprobe.conf : > > > > install slamr modprobe --ignore-install > ungrab-winmodem ; modprobe > > --ignore-install slamr ; test -e /dev/slamr0 || > (/bin/mknod -m 660 > > /dev/slamr0 c 242 0 2>/dev/null && chgrp > uucp /dev/slamr0) > > alias scsi_hostadapter ata_piix > > alias snd-card-0 snd-hda-intel > > options snd-card-0 index=0 > > options snd-hda-intel index=0 > > alias eth0 r8169 > > > > this is termial : > > > > [root@localhost ~]# ls /dev/sla* -l > > crw-rw---- 1 root root 242, 0 2007-06-18 17:38 > /dev/slamr0 > > [root@localhost ~]# modprobe ungrab-winmodem > > [root@localhost ~]# modprobe slamr > > [root@localhost ~]# '/etc/init.d/slmodemd' > restart > > Starting SmartLink Modem driver for slamr0: > [ OK ] > > [root@localhost ~]# slmodemd -c USA /dev/slamr0 > > error: mdm setup: cannot open dev `/dev/slamr0': > No such device > > error: cannot setup device `/dev/slamr0' > > [root@localhost ~]# > > > > now what doing ? > > thanks. > > hogat > > > > > > > > > > > > > > > > > > --- On Sun, 7/12/08, Antonio Olivares > <olivares14031@xxxxxxxxx> wrote: > > > >> From: Antonio Olivares > <olivares14031@xxxxxxxxx> > >> Subject: Re: my modem is smartHCF or smart link > ltd how install it on > >> fedora7 and fedora9? > >> To: "hogat allah shahamiri" > <hogat_allah_sh@xxxxxxxxx> > >> Cc: discuss@xxxxxxxxxxxxx > >> Date: Sunday, 7 December, 2008, 5:06 AM > >> Hogat, > >> > >> Maximize gedit and then cut and paste little by > little till > >> the end of the line > >> > >> install slamr modprobe --ignore-install > ungrab-winmodem; > >> modprobe --ignore-install slamr ; test -e > /dev/slamr0 || > >> (/bin/mknod -m 660 /dev/slamr0 c 242 0 > 2>/dev/null > >> && chgrp uucp /dev/slamr0) > >> > >> If you can't get it to put all of that in one > line, > >> your other option is to put in the the command in > start{ > >> procedure > >> after > >> modprobe ungrab-winmodem > >> modprobe slamr > >> mknod -m 660 /dev/slamr0 > >> > >> and then it should work, but please try to put it > in one > >> line. > >> > >> Regards, > >> > >> Antonio > > > > > > > > > > > > New Email addresses available on Yahoo! > > Get the Email name you've always wanted on the > new @ymail and > > @rocketmail. > > Hurry before someone else does! > > http://mail.promotions.yahoo.com/newdomains/aa/ > > > > Get your preferred Email name! Now you can @ymail.com and @rocketmail.com. http://mail.promotions.yahoo.com/newdomains/aa/
