i act it marve then reboot computer and else this terminal : -------------------- [root@localhost ~]# '/etc/init.d/slmodemd' restart Starting SmartLink Modem driver for slamr0: [ OK ] [root@localhost ~]# slmodemd -c USA /dev/slamr0 error: mdm setup: cannot open dev `/dev/slamr0': No such device error: cannot setup device `/dev/slamr0' [root@localhost ~]# modprobe ungrab-winmodem [root@localhost ~]# modprobe slamr [root@localhost ~]# slmodemd -c USA /dev/slamr0 error: mdm setup: cannot open dev `/dev/slamr0': No such device error: cannot setup device `/dev/slamr0' [root@localhost ~]# chkconfig slmodemd off [root@localhost ~]# chkconfig slmodemd --list slmodemd 0:off 1:off 2:off 3:off 4:off 5:off 6:off [root@localhost ~]# modprobe ungrab-winmodem [root@localhost ~]# modprobe slamr [root@localhost ~]# slmodemd -c USA /dev/slamr0 error: mdm setup: cannot open dev `/dev/slamr0': No such device error: cannot setup device `/dev/slamr0' [root@localhost ~]# wvdialconf /etc/wvdial.conf Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Port Scan<*1>: S2 S3 Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial? Please read the FAQ at http://open.nit.ca/wvdial/ If you still have problems, send mail to wvdial-list@xxxxxxxxxxxxx [root@localhost ~]# ------------------------ what to do now. thanks Hogat --- On Sun, 7/12/08, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: > From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> > Subject: Re: my modem is smartHCF or smart link ltd how install it on fedora7 and fedora9? > To: "Antonio Olivares" <olivares14031@xxxxxxxxx> > Cc: hogat_allah_sh@xxxxxxxxx, olivares14031@xxxxxxxxx, discuss@xxxxxxxxxxxxx > Date: Sunday, 7 December, 2008, 8:10 PM > re: Add to start() at /etc/init.d/slmodemd > ------------ > modprobe ungrab-winmodem > modprobe slamr > /bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null > && chgrp uucp /dev/slamr0 > > the order should be: > Add to start() at /etc/init.d/slmodemd > ------------ > modprobe ungrab-winmodem > /bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null > && chgrp uucp /dev/slamr0 > modprobe slamr > > MarvS New Email addresses available on Yahoo! Get the Email name you've always wanted on the new @ymail and @rocketmail. Hurry before someone else does! http://mail.promotions.yahoo.com/newdomains/aa/
