Hogat,
It is not apparent to me that a clean test has been done.
Please after a boot up do:
$ ls -l /dev/slamr0 /dev/ttySL0
If these devices are not reported, manually do:
# modprobe ungrab-winmodemd
# mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp uucp /dev/slamr
This step MUST be done before
$ modprobe slamr
Only then may modem activation proceed by
# slmodemd -c USA /dev/slamr0
Then there should be a report of port creation:
/dev/ttySL0 -> /dev/pts/N , N some number
Once there has been such a creation, the next functional test is:
# wvdialconf /etc/wvdial.conf
MarvS
On Sun, Dec 7, 2008 at 10:49 AM, hogat allah shahamiri
<hogat_allah_sh@xxxxxxxxx> wrote:
> this is odd to me too.
> how send it to sashak and what send to he?
> at last what i do ?
> no one known that this modem could installed on fedora or no?
> i send all of message to you with this modem that installed on my
> windows xp
> what to do ? what you say Marvs?
> thanks
> Hogat.
>
>
>
>
> --- On Sun, 7/12/08, Antonio Olivares <olivares14031@xxxxxxxxx> wrote:
>
>> From: Antonio Olivares <olivares14031@xxxxxxxxx>
>> Subject: Re: my modem is smartHCF or smart link ltd how install it on fedora7 and fedora9?
>> To: hogat_allah_sh@xxxxxxxxx
>> Cc: discuss@xxxxxxxxxxxxx
>> Date: Sunday, 7 December, 2008, 9:34 PM
>> Hogat,
>>
>> I am trying to follow carefully what you did, but I see
>> something does
>> not make sense
>>
>> [root@localhost ~]# modprobe ungrab-winmodem
>> [root@localhost ~]# modprobe slamr
>> [root@localhost ~]# ls /dev/slamr -l
>> ls: cannot access /dev/slamr: No such file or directory
>>
>> [root@localhost ~]# ls /dev/slamr0 -l
>> crw-rw---- 1 root uucp 242, 0 2007-06-18 23:39 /dev/slamr0
>>
>> [root@localhost ~]# slmodemd -c USA /dev/slamr0
>> error: mdm setup: cannot open dev `/dev/slamr0': No
>> such device
>> error: cannot setup device `/dev/slamr0'
>>
>> If the /dev/slamr0 exists, and slmodemd cannot find it, and
>> dmesg reports:
>>
>> [root@localhost ~]# dmesg | grep 'slamr'
>> slamr: module license 'Smart Link Ltd.' taints
>> kernel.
>> slamr: SmartLink AMRMO modem.
>> slamr: probe 2000:2800 \$ t$ |$ G 0
>> card...
>> slamr: cannot create card.
>> slamr: probe of 0000:04:01.0 failed with error -12
>> [root@localhost ~]#
>>
>> Then slamr driver(slmodem-2.9.11-20080817.tar.gz might not
>> support this modem?
>> Sending this to sashak might help to determine if this
>> chipset is
>> supported or not.
>>
>> Regards,
>>
>
>
>
> Get your preferred Email name!
> Now you can @ymail.com and @rocketmail.com.
> http://mail.promotions.yahoo.com/newdomains/aa/
>
>
