Gustav Sadly there is no support for your audio+modem Audio device: Intel Corporation 82801I " CLASS=0403 PCIDEV=8086:293e SUBSYS=103c:3603 with modem CHIP=0x11c11040 under your X86_64 installation. But should you choose to emulate an Intel architecture, the support route would be: At http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ Compiling resources for a driver module pair: agrmodem.ko + agrserial.ko Use the agrsm-HDA-20080721-ALSA15.tar.bz2 or agrsm-HDA-20080721.tar.bz2 Read the agrsm_howto.txt. For 11c11040 chips, also the HOWTO-Agere-11c11040-HDA.html MarvS scanModem maintainer On Sat, Sep 27, 2008 at 2:55 AM, Gustav Degreef <gustav97@xxxxxxxxx> wrote: > Dear Experts, > > I would appreciate help in figuring out which driver, if any, may help > getting my modem to work. The computer is a new HP Pavillion dv5 > laptop. Thank you. Gustav Degreef > > -------------------------- System information ---------------------------- > CPU=x86_64, > Welcome to openSUSE 11.0 (X86-64) - Kernel > Linux version 2.6.25.11-0.1-default (geeko@buildhost) (gcc version > 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE > Linux) ) #1 SMP 2008-07-13 20:48:28 +0200 > scanModem update of: 2008_08_26 > > > Some modem drivers can only be used in 32 bit modem on x86_64 systems, > while some others are competent on x86_64 Systems. Cases are: > 1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html > for the snd-hda-intel audio+modem driver. Also applicable to AC97 > modem controllers. > In both cases, 32 bit libraries must be installed to support the > slmodemd helper having a precompiled 32 bit component. > 2) For USB modems using the slusb.ko driver. 32 bit libraries must be > installed to support the slmodemd helper having a precompiled 32 bit > component > 3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes > are x86_64 competent. > > There are no blacklisted modem drivers in /etc/modprobe* files > Attached USB devices are: > ID 138a:0001 > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface > [Integrated Module] > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 5986:0137 Acer, Inc > ID 1058:0704 Western Digital Technologies, Inc. > ID 1d6b:0002 Linux Foundation 2.0 root hub > ID 054c:0243 Sony Corp. MicroVault Flash Drive > ID 1d6b:0002 Linux Foundation 2.0 root hub > > USB modems not recognized > > For candidate card in slot 00:1b.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1b.0 8086:293e 103c:3603 Audio device: Intel Corporation 82801I > > Modem interrupt assignment and sharing: > 22: 534 607 IO-APIC-fasteoi HDA Intel > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== > The ALSA packages provide audio support and also drivers for some modems. > ALSA diagnostics are written during bootup to /proc/asound/ folders. > > The ALSA verion is 1.0.16 > The modem cards detected by "aplay -l" are: None > > > The /proc/asound/pcm file reports: > ----------------------- > 00-01: STAC92xx Digital : STAC92xx Digital : playback 1 > 00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 2 > > about /proc/asound/cards: > ------------------------ > 0 [Intel ]: HDA-Intel - HDA Intel > HDA Intel at 0xdf300000 irq 22 > > PCI slot 00:1b.0 has a High Definition Audio Card > The drivers are in the kernel modules tree at: > /lib/modules/2.6.25.11-0.1-default/kernel/sound/pci/hda/snd-hda-intel.ko > New HDA card type: > > > > The modem codec file for the HDA card is: /proc/asound/card0/codec#1 > -------------------------------------------------------- > Codec: LSI ID 1040 > Address: 1 > Vendor Id: 0x11c11040 > Subsystem Id: 0x103c137e > Revision Id: 0x100200 > Modem Function Group: 0x1 > > The audio card hosts a softmodem chip: 0x11c11040 > If not a Conexant modem, the driver > agrmodem+agrserial+patched_snd-hda-intel with its dependent drivers: > > ---------- > provide audio + modem support with the modem chip residing on the subsystem. > Any particular card can host any one of several soft modem chips. > > === Finished firmware and bootup diagnostics, next deducing cogent software. === > > Predictive diagnostics for card in bus 00:1b.0: > Modem chipset detected on > NAME="Audio device: Intel Corporation 82801I " > CLASS=0403 > PCIDEV=8086:293e > SUBSYS=103c:3603 > IRQ=22 > CHIP=0x11c11040 > IDENT=11c11040 > Driver=agrmodem+agrserial+patched_snd-hda-intel > > For candidate modem in: 00:1b.0 > 0403 Audio device: Intel Corporation 82801I > Primary device ID: 8086:293e > Support type needed or chipset: 11c11040 > > > ----------------end Softmodem section -------------- > > Writing DOCs/Intel.txt > > Vendor 11c1 is Lucent Technologies with modem technology now under LSI Inc. > Their Linux code developer/maintainer is Soumyendu Sarkar. Support > for a chipset and its > continued maintenance is only initiated at the request of a major > chipset buyer, > or comparable sponsor. Several different modem chipset types are produced: > with varying support under Linux. > Device ID Support Name Comment > --------- ------------- ----------- ----------------------------- > 0480 serial_drivers Venus controller chipset 1673JV7 > 0440-045d martian Mars/Apollo DSP (digital signal > processing) chipsets > 0462 none 56K.V90/ADSL Wildwire > 048d none SV2P soft modem > 048(c or f) AGRSM SV2P soft modem > 0600 none soft modem, very few in the field. > 0620 AGRSM Pinball soft modem, in some HP desktop PCs > 011c11040 AGRSM hosted on High Definition Audio cards > 062(1-3) none SV92PP,Pinball soft modem, in some HP desktop PCs > > martian - At http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ > AGRSM - At http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ > Compiling resources for a driver module pair: agrmodem.ko + agrserial.ko > Use the agrsm-HDA-20080721-ALSA15.tar.bz2 or agrsm-HDA-20080721.tar.bz2 > Read the agrsm_howto.txt. For 11c11040 chips, also the > HOWTO-Agere-11c11040-HDA.html > > -------------- end Agere Systems section ------------------- > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > The kernel was compiled with gcc version 4.3.1 and a compiler is not installed > > linux-headers-2.6.25.11-0.1-default resources needed for compiling > are not manifestly ready! > > If compiling is necessary packages must be installed, providing: > gcc-4.3 make kernel-source-2.6.25.11-0.1-default > > > If a driver compilation fails, with message including some lack of > some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. > The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwxr-xr-x 1 root dialout 361016 2008-06-06 18:28 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > noipdefault > noauth > crtscts > lock > modem > asyncmap 0 > nodetach > lcp-echo-interval 30 > lcp-echo-failure 4 > lcp-max-configure 60 > lcp-restart 2 > idle 600 > noipx > file /etc/ppp/filters > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > > Don't worry about the following, it is for experts should trouble > shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > /etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", NAME="modems/mwave", > GROUP="uucp" > /etc/udev/rules.d/77-network.rules:SUBSYSTEM=="net", > ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*", > GOTO="skip_ifup" > Within /etc/modprobe.conf files: > > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- >
