Randy, PCIDEV=12b9:1008 Serial controller: 3Com Corp, Modem Division 56K FaxModem Model 5610 " should be supported by serial drivers integral to your boot kernel. $ sudo wvdialconf /etc/wvdial.conf should report finding. Read the wvdial.txt on how to do the edit with: $ sudo gedit /etc/wvdial.conf Then shutdown other COMM channels and dialout with: $ sudo wvdial. MarvS On Fri, Aug 15, 2008 at 4:05 AM, Randy Pinion <armandopenblade@xxxxxxxxx> wrote: > I am using Ubuntu and utterly lost as to how to configure internet > access on it using this modem, which *seems* it is built off of a > supported Texas Instruments chipset, according to some creative > Googling I've done. Any very specific help in getting this > to connect to a dialup ISP would be greatly appreciated, as all that > Ubuntu gives me in my Network options is a Point to Point connection > > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.24-19-generic > With this Subject Line cogent experts will be alerted, and useful > case names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for > dialup service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an > Internet Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information ---------------------------- > CPU=x86_64, > Linux version 2.6.24-19-generic (buildd@yellow) (gcc version 4.2.3 > (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:15:37 UTC 2008 > scanModem update of: 2008_08_09 > > > Some modem drivers can only be used in 32 bit modem on x86_64 systems, > while some others are competent on x86_64 Systems. Cases are: > 1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html > for the snd-hda-intel audio+modem driver. Also applicable to AC97 > modem controllers. > In both cases, 32 bit libraries must be installed to support the > slmodemd helper having a precompiled 32 bit component. > 2) For USB modems using the slusb.ko driver. 32 bit libraries must be > installed to support the slmodemd helper having a precompiled 32 bit > component > 3) The hsfmodem and hcflinmodem drivers for Conexant chipsest modes > are x86_64 competent. > > There are no blacklisted modem drivers in /etc/modprobe* files > Attached USB devices are: > ID 152d:2339 JMicron Technology Corp. / JMicron USA Technology Corp. > ID 12f7:1d00 > ID 045e:00d1 Microsoft Corp. > ID 045e:00dd Microsoft Corp. > ID 0e8f:0003 > > USB modems not recognized > > For candidate card in slot 05:01.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 05:01.0 12b9:1008 12b9:00b7 Serial controller: 3Com Corp, > Modem Division 56K FaxModem Model 5610 > > Modem interrupt assignment and sharing: > 17: 8 5 5 7 IO-APIC-fasteoi HDA Intel > --- Bootup diagnostics for card in PCI slot 05:01.0 ---- > [ 31.642861] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 17 (level, > low) -> IRQ 17 > [ 31.642966] 0000:05:01.0: ttyS1 at I/O 0xe880 (irq = 17) is a 16550A > > For candidate card in slot 01:00.1, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 01:00.1 1002:aa30 1002:aa30 Audio device: ATI Technologies > Inc Unknown device aa30 > > Modem interrupt assignment and sharing: > 17: 8 5 5 7 IO-APIC-fasteoi HDA Intel > --- Bootup diagnostics for card in PCI slot 01:00.1 ---- > [ 42.411034] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, > low) -> IRQ 17 > [ 42.411753] PCI: Setting latency timer of device 0000:01:00.1 to 64 > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== > The ALSA packages provide audio support and also drivers for some modems. > ALSA diagnostics are written during bootup to /proc/asound/ folders. > > The ALSA verion is 1.0.16 > The modem cards detected by "aplay -l" are: None > > > The /proc/asound/pcm file reports: > ----------------------- > 00-03: ATI HDMI : ATI HDMI : playback 1 > > about /proc/asound/cards: > ------------------------ > 0 [HDMI ]: HDA-Intel - HDA ATI HDMI > HDA ATI HDMI at 0xf7dfc000 irq 17 > > PCI slot 01:00.1 has a High Definition Audio Card > The drivers are in the kernel modules tree at: > /lib/modules/2.6.24-19-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko > New HDA card type: > > > > === Finished firmware and bootup diagnostics, next deducing cogent software. === > > Predictive diagnostics for card in bus 05:01.0: > Modem chipset detected on > NAME="Serial controller: 3Com Corp, Modem Division 56K FaxModem Model 5610 " > CLASS=0700 > PCIDEV=12b9:1008 > SUBSYS=12b9:00b7 > IRQ=17 > IDENT=USrobotics.serial > > For candidate modem in: 05:01.0 > 0700 Serial controller: 3Com Corp, Modem Division 56K FaxModem Model 5610 > Primary device ID: 12b9:1008 > Support type needed or chipset: USrobotics.serial > > > ----------------end Softmodem section -------------- > > > Predictive diagnostics for card in bus 01:00.1: > Modem chipset not detected on > NAME="Audio device: ATI Technologies Inc Unknown device aa30" > CLASS=0403 > PCIDEV=1002:aa30 > SUBSYS=1002:aa30 > IRQ=17 > > For candidate modem in: 01:00.1 > 0403 Audio device: ATI Technologies Inc Unknown device aa30 > Primary device ID: 1002:aa30 > Support type needed or chipset: > > > ----------------end Softmodem section -------------- > > scanModem could not identify the Support Type needed from diagnosics > or archives. > If an alternative boot into Microsoft windows can be done, do mouse > clicks on: > Start > Settings > Control Panel > Classical View (for Window XP) > System >> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to > expand the graphic. Manufacturer information may be displayed. For example, CXT > stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor > and device information. > Next do the Query Modem and record the ATI specifications displayed such as: > ATI3 - Agere SoftModem Version 2.1.22 > ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 > Try to identify the modem setup file, with name perhaps MODEM.INF. > If may contain chipset Vendor informaton. > > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.2.3 > and the compiler used in kernel assembly: 4.2.3 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.2 > linuc_headers base folder /lib/modules/2.6.24-19-generic/build > > However some compilations and executable functions may need additional files, > in the FileNames.h (so called kernel "h"eaders) collection installed > in /usr/include/ . > For martian_modem, additional required packages are n. The also > required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev > packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > > > If a driver compilation fails, with message including some lack of > some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. > The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 313600 2007-10-04 16:48 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > > Don't worry about the following, it is for experts should trouble > shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to > blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- >
