George, Please do the Modem diagnostics under Microsoft and copy out both the responses to the AT commands and from the Driver Details tab, the Device and Vendor information. See SoftModem.txt abourt details of running this test. MarvS On Sun, Jul 20, 2008 at 3:10 AM, George KALOUTAS <kaloutas@xxxxxxxxxxxxxxx> wrote: > Hi all, > > I installed the hsf driver (which required the alsa linuxant driver) but > no Modem was detected (see below). > > =================== > sudo wvdialconf /etc/wvdial.conf > [sudo] password for george: > Editing `/etc/wvdial.conf'. > > Scanning your serial ports for a modem. > > Modem Port Scan<*1>: S0 S1 S2 S3 SHSF0 SHSF1 SHSF2 SHSF3 > Modem Port Scan<*1>: SHSF4 SHSF5 SHSF6 SHSF7 > > > Sorry, no modem was detected! Is it in use by another program? > Did you configure it properly with setserial? > > Please read the FAQ at http://open.nit.ca/wiki/?WvDial > > If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>. > ======================================= > > Can you advise on what to do next ? > > Thanks in advance. > > G. K. > > On Sat, 2008-07-19 at 14:21 -0400, Marvin Stodolsky wrote: >> George, >> >> Your modem is most likely a Conexant type, hosted on the Audio card. >> Test the below and report back. >> >> MarvS >> scanModem maintainer >> ==================== >> From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php >> download hsfmodem-7.68.00.12full_k2.6.24_19_generic_ubuntu_i386.deb.zip >> Under Linux unpack with: >> $ unzip hsfmodem*.zip >> Then install with: >> $ sudo dpkg -i hsfmodem*.deb >> Subsequently, the modem should be found with >> $ sudo wvdialconf /etc/wvdial.conf >> Edit in your personal information with: >> $ sudo gedit /etc/wvdial.conf >> and try dialing out with: >> $ sudo wvdial. >> See DOCs/Testing.txt for details. >> Read DOCs/Conexant.txt >> >> On 7/19/08, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >> > A pci modem was not identified as scanModem reports you could try to do the >> > following: >> > >> > <quote> >> > High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem, >> > and many are supported by the ALSA audio+modem driver snd-hda-intel >> > A modem was not detected on HDA card 8086:284b. >> > If another modem card is present, then most likely 8086:284b does not host >> > a mo >> > dem. >> > If another modem card has not been detected, then possibilities are: >> > 1) A Conexant modem chip is present on 8086:284b, as Conexant chips >> > are frequently not detectable by ALSA diagnostics >> > 2) The modem may be of the older non-PCI Controller Chipset >> > (hardware) t >> > ype. >> > Try detection with Root permission: >> > wvdialconf /etc/wvdial.conf >> > </quote> >> > >> > or try the Windows method if you have windows**** >> > >> > <quote> >> > If an alternative boot into Microsoft windows can be done, do mouse >> > clicks on: >> > Start > Settings > Control Panel > Classical View (for Window XP) > >> > System >> >> Hardware > Device Manager > Modems > Click on the + > Modem. Double click >> >> to >> > expand the graphic. Manufacturer information may be displayed. For example, >> > CXT >> > stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or >> > vendor >> > and device information. From the Driver Details TAB, copy out the VENdor and >> > DEVice information. >> > Next do the Query Modem and record the ATI specifications displayed such as: >> > ATI3 - Agere SoftModem Version 2.1.22 >> > ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 >> > Try to identify the modem setup file, with name perhaps MODEM.INF. >> > If may contain chipset Vendor informaton. >> > </quote> >> > >> > Regards, >> > >> > Antonio >> > >> > --- On Sat, 7/19/08, George KALOUTAS <kaloutas@xxxxxxxxxxxxxxx> wrote: >> > >> >> From: George KALOUTAS <kaloutas@xxxxxxxxxxxxxxx> >> >> Subject: Modem Not Recognized (Ubuntu 8.04) >> >> To: discuss@xxxxxxxxxxxxx >> >> Date: Saturday, July 19, 2008, 10:21 AM >> >> Hi there, >> >> >> >> My laptop is an ACER 2920Z. It has an internal V.92 56K >> >> Modem. >> >> I have tried everything but cannot figure out how to make >> >> it work. >> >> >> >> Can anybody assist? >> >> >> >> Sincerely. >> >> >> >> G. Kaloutas. >> > >> > >> > >> > >> > >