Hello, Bjorn doesn't it work in kernel 2.6.25? can you send me a log with module compilation? for if i can help you. Regards. ---------------------------- Mensaje original ---------------------------- Asunto: Re: Agere 11c11040 module building success - 2.6.25.5 De: "Mr.Bor de Tor" <uniacke1@xxxxxxxx> Fecha: Vie, 4 de Julio de 2008, 12:19 pm Para: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> Cc: discuss@xxxxxxxxxxxxx -------------------------------------------------------------------------- Eeh.. Not quite, Marv :) That was written by José R, who managed to get it working on that kernel- My system is 2.6.25... and it's not working there yet. I'm considering returning to the 2.6.22 kernel to see if I can get it working there. Bjorn. --- Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: > Folks > > Willow's system is: Ubuntu Linux > CPU=i686, Linux version 2.6.24-16-generic > (buildd@palmer) (gcc version > 4.2.3 (Ubuntu > > For candidate card in slot 00:1b.0, firmware > information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- > -------------- > 00:1b.0 8086:27d8 1179:ff01 Audio device: > Intel Corporation 82801G > which does have have the 11c11040 chip. > > Willow, > There is a success report from Bjorn under a > Ubuntu 2.6.22 kernel. > See > http://linmodems.technion.ac.il/bigarch/archive-eighth/msg01923.html > for some very terse instructions. > > Can't help much this week end, with visiting family > here. > > MarvS > > On Fri, Jul 4, 2008 at 3:27 AM, Willow Schlanger > <wschlanger@xxxxxxxxx> wrote: > > Does it actually work? I have a 11c11040 and no > idea how to get it to work. > > The directions here are a bit complicated. > > > > I have ALSA x.16 I think. Will these new two files > work with it? Or do they > > need x.15? > > > > Can you post complete directions for a newbie? I > can't get the patch to > > work, does this supercede the patch? I did get > ALSA x.16 (I think) to > > compile and install without patches. > > > > Willow > > > > Bjorn Wielens wrote: > >> > >> Hi all, > >> As promised, here's the update and the logs. > >> This is a 32 bit system, kernel 2.6.25.5-pae > (openSuSE 11 default) > >> modem.log details the kernel OOPS I get caused by > >> modem-update-hda-structs.patch. > >> modem1.log details two attempts. The first with > all patches EXCEPT > >> modem-update-hda-structs.patch and > agrsm-hda_codec.patch. > >> This is the build that gives 'no stream' errors. > (see log) > >> The second half of the log (below the > ------------------------------ line) > >> details the attempt WITH the > agrsm_hda_codec.patch but without the > >> update-hda-structs patch. > >> This builds and loads fine (no complaints of > missing symbols either, > >> unlike the other two builds) but does a hard > lockup on trying to access the > >> modem device. (this happens even if I boot SuSE > in 'failsafe' mode.) > >> The other two files, hda_codec.c and hda_codec2.c > are the two ALSA codec > >> files that have been modified to export the > read/write symbols for agrsm. > >> the former is from > alsa-kernel/pci/hda/hda_codec.c and the latter is > >> pci/hda/hda_codec.c > >> > >> So close... but yet so far. Hope we can figure > this out- I would hate to > >> have to go back to an earlier kernel version on > my laptop, since the > >> wireless is now finally working properly. > >> > >> Bjorn. > >> > >> > >> > >> Marvin Stodolsky wrote: > >>> > >>> Bjorn, > >>> > >>> It would be worth retesting the Agere Driver > pair with potential > >>> resource conflicts minimized. > >>> In /etc/discover.conf comment out anything you > don't need. > >>> Also blacklist or unload any non-essential > modules. > >>> Then reboot and retest. > >>> modprobe agrmodem > >>> may be harmless, as the IRQ is taken only upon > >>> modprobe agrserial > >>> > >>> Please report also to the List if successful. > >>> > >>> MarvS > >>> > >>> > >>> On Tue, Jun 24, 2008 at 6:00 AM, Mr.Bor de Tor > <uniacke1@xxxxxxxx> wrote: > >>> > >>>> > >>>> Hi all, > >>>> I have succeeded in building the 2.1.80 > >>>> agrmodem/agrserial pair (with > >>>> HDA support) on my computer, and the modules > loaded > >>>> successfully! > >>>> (However, running 'AgrMdmDaemon' hangs the > system.)' > >>>> No unresolved > >>>> hda_codec_read/write symbol issues. > >>>> > >>>> Here's what I did: > >>>> 1. get the file > >>>> > >>>> > >>>> > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-2.1.80-2mdv2009.0.src.rpm > >>>> from the 11c11040 pit of the linmodems site. > >>>> > >>>> Make sure it's the .src.rpm file. > >>>> > >>>> convert to cpio with 'rpm2cpio > >>>> agrsm-2.1.80-2mdv2009.0.src.rpm > > >>>> agrsm-2.1.80-2mdv2009.0.cpio > >>>> > >>>> extract: cpio -i < agrsm-2.1.80-2mdv2009.0.cpio > >>>> > >>>> There are a multitude of patch files included > in the > >>>> src. RPM. apply > >>>> ALL of them. This fixes the IRQ flags, among > other > >>>> things. > >>>> > >>>> If you run make at this stage, then it will > fail > >>>> because the module > >>>> uses a GPL-only function call - usb_put_dev. > There > >>>> are various ways to > >>>> bypass this, either by commenting out the line > in > >>>> question, or my > >>>> unorthodox (and lazy) method of editing the > >>>> MODULE_LICENSE line in > >>>> agrsoftmodem.c. > >>>> > >>>> run make module. > >>>> The modules built for me on 2.6.25.5 and they > load > >>>> fine. Dmesg shows > >>>> that the modem is detected. /dev/ttyAGS3 > appears. > >>>> > >>>> However, if I try to run the modem daemon > >>>> ./AgrMdmDaemon, it locks the > >>>> entire system and requires a hard reset. > >>>> > >>>> Hope this helps someone to get it going! > >>>> > >>>> Bjorn. > >>>> > >>>> > >>>> > >>>> > __________________________________________________________________ > >>>> Be smarter than spam. See how smart SpamGuard > is at giving junk email > >>>> the boot with the All-new Yahoo! Mail. Click > on Options in Mail and switch > >>>> to New Mail today or register for free at > http://mail.yahoo.ca > >>>> > >>>> > >>> > >>> > >> > > > > > __________________________________________________________________ Looking for the perfect gift? Give the gift of Flickr! http://www.flickr.com/gift/ -------------------------------------- José Luis Díez Ruiz Dpto. de Sistemas SUMINISTROS Y DESARROLLOS TECNOLOGICOS S.L. C/ Torres Quevedo, 82 41800 Sanlucar La Mayor (Sevilla) Tel. (+34) 954 78 50 22 Fax. (+34) 955 70 37 77 e-mail joseluis.diez@xxxxxx web www.sdt.es
