Marvin, thank you for replying. I also tried to get in contact with efax support, but unfortunatly I have gotten no reply, so far. So, do you think the trouble may reside in that low level driver? I have been using the driver snd_intel8x0m because it was mentioned in my ModemData.txt file. Regards, Federico Il Tuesday 01 July 2008 23:21:40 Marvin Stodolsky ha scritto: > Download from http://linmodems.technion.ac.il/packages/smartlink/ > the slmodem-2.9.11-20080629.tar.gz, which has a fax/ subfolder with > some guidance which may be useful. The slamr driver mentioned therein > is one of the alternate drivers working under slmodemd control. > > Aside from that we lack fax expertise on this list, > and you should consult with the efax list > > On Tue, Jul 1, 2008 at 4:47 PM, <gennarino63@xxxxxxxx> wrote: > > Same problem here. Both slmodemd and snd_intel8x0m versions are right the same you mentioned. > > Please, anyone give us some feedback. > > Thank you in advance, > > > > Genny > > > > Il Saturday 28 June 2008 18:33:46 F. G. ha scritto: > >> Hello, > >> > >> I am using SmartLink Soft Modem: version 2.9.11 Feb 25 2008 18:25:57, with the snd_intel8x0m driver (see attached ModemData file), on Kubuntu 8.04. > >> Whenever I try to send a multi-page fax, using efax v 0.9a, the first page seems to be correctly sent: > >> > >> [...] > >> efax: 31:53 sent 20+2292 lines, 51553+0 bytes, 29 s 14221 bps > >> efax: 31:53 command "+FTH=3" > >> efax: 31:53 waiting 3,1 s > >> efax: 31:53 .695 [CONNECT<CR><LF>] > >> efax: 31:53 response "CONNECT" > >> efax: 31:53 sent 3 bytes: ff c8 f2 > >> efax: 31:53 sent MPS - not done > >> efax: 31:53 waiting 13,6 s > >> efax: 31:55 .015 [OK<CR><LF>] > >> efax: 31:55 response "OK" > >> efax: 31:55 command "+FRH=3" > >> efax: 31:55 waiting 3,0 s > >> efax: 31:55 .375 [CONNECT<CR><LF>] > >> efax: 31:55 response "CONNECT" > >> efax: 31:56 waiting 2,0 s > >> efax: 31:56 .375 [OK<CR><LF>] > >> efax: 31:56 response "OK" > >> efax: 31:56 received 5 bytes: ff c8 32 75 ec > >> efax: 31:56 received RTN - page not OK, check channel > >> efax: 31:56 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms > >> efax: 31:56 remote 196lpi 14.4kbps 8.5"/215mm any 2D ECM-64 - 0ms > >> efax: 31:56 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms > >> efax: 31:56 command "+FTH=3" > >> efax: 31:56 waiting 3,1 s > >> efax: 31:56 .455 [CONNECT<CR><LF>] > >> efax: 31:56 response "CONNECT" > >> efax: 31:56 sent 23 bytes: > >> efax: 31:56 ff c0 c2 cc 6c 0c 9c 0c ac 0c 0c ec 04 4c 0c 04 > >> efax: 31:56 9c cc d4 04 04 04 04 > >> efax: 31:56 sent TSI - caller ID > >> efax: 31:56 waiting 13,6 s > >> efax: 31:58 .295 [CONNECT<CR><LF>] > >> efax: 31:58 response "CONNECT" > >> efax: 31:58 sent 6 bytes: ff c8 c1 00 46 1e > >> efax: 31:58 sent DCS - session format > >> efax: 31:58 waiting 13,6 s > >> efax: 31:58 .675 [OK<CR><LF>] > >> efax: 31:58 response "OK" > >> efax: 31:58 command "+FTM=145" > >> efax: 31:58 waiting 3,1 s > >> efax: 31:58 .815 [CONNECT<CR><LF>] > >> efax: 31:58 response "CONNECT" > >> efax: 31:58 waiting 30,0 s > >> efax: 32:01 .975 [OK<CR><LF>] > >> efax: 32:01 response "OK" > >> efax: 32:01 sent TCF - channel check of 2700 bytes > >> efax: 32:01 command "+FRS=1" > >> efax: 32:01 waiting 3,0 s > >> efax: 32:02 .075 [OK<CR><LF>] > >> efax: 32:02 response "OK" > >> efax: 32:02 command "+FRH=3" > >> efax: 32:02 waiting 3,0 s > >> efax: 32:02 .355 [CONNECT<CR><LF>] > >> efax: 32:02 response "CONNECT" > >> efax: 32:03 waiting 2,0 s > >> efax: 32:03 .335 [OK<CR><LF>] > >> efax: 32:03 response "OK" > >> efax: 32:03 received 5 bytes: ff c8 21 57 be > >> efax: 32:03 received CFR - channel OK > >> efax: 32:03 command "+FTM=146" > >> efax: 32:03 waiting 3,1 s > >> efax: 32:03 .435 [CONNECT<CR><LF>] > >> efax: 32:03 response "CONNECT" > >> efax: 32:04 padding to 0 bytes/scan line. > >> > >> the problem comes by the transmission of the second page: > >> > >> efax: 32:04 header:[2008/06/28 17:26 +XXXXXXXXXXXXXXXXXXXXX. p. 2/4] > >> efax: 32:28 waiting 30,0 s > >> efax: 32:33 .076 [OK<CR><LF>] > >> efax: 32:33 response "OK" > >> efax: 32:33 sent 20+2292 lines, 51553+0 bytes, 29 s 14221 bps > >> efax: 32:33 command "+FTH=3" > >> efax: 32:33 waiting 3,1 s > >> efax: 32:33 .196 [CONNECT<CR><LF>] > >> efax: 32:33 response "CONNECT" > >> efax: 32:33 sent 3 bytes: ff c8 f2 > >> efax: 32:33 sent MPS - not done > >> efax: 32:33 waiting 13,6 s > >> efax: 32:34 .516 [OK<CR><LF>] > >> efax: 32:34 response "OK" > >> efax: 32:34 command "+FRH=3" > >> efax: 32:34 waiting 3,0 s > >> efax: 32:34 .976 [CONNECT<CR><LF>] > >> efax: 32:34 response "CONNECT" > >> efax: 32:35 waiting 2,0 s > >> efax: 32:35 .956 [OK<CR><LF>] > >> efax: 32:35 response "OK" > >> efax: 32:35 received 5 bytes: ff c8 32 75 ec > >> efax: 32:35 received RTN - page not OK, check channel > >> efax: 32:35 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms > >> efax: 32:35 remote 196lpi 14.4kbps 8.5"/215mm any 2D ECM-64 - 0ms > >> efax: 32:35 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms > >> efax: 32:35 command "+FTH=3" > >> efax: 32:35 waiting 3,1 s > >> efax: 32:36 .036 [CONNECT<CR><LF>] > >> efax: 32:36 response "CONNECT" > >> efax: 32:36 sent 23 bytes: > >> efax: 32:36 ff c0 c2 cc 6c 0c 9c 0c ac 0c 0c ec 04 4c 0c 04 > >> efax: 32:36 9c cc d4 04 04 04 04 > >> efax: 32:36 sent TSI - caller ID > >> efax: 32:36 waiting 13,6 s > >> efax: 32:37 .876 [CONNECT<CR><LF>] > >> efax: 32:37 response "CONNECT" > >> efax: 32:37 sent 6 bytes: ff c8 c1 00 46 1e > >> efax: 32:37 sent DCS - session format > >> efax: 32:37 waiting 13,6 s > >> efax: 32:38 .256 [OK<CR><LF>] > >> efax: 32:38 response "OK" > >> efax: 32:38 command "+FTM=145" > >> efax: 32:38 waiting 3,1 s > >> efax: 32:38 .396 [CONNECT<CR><LF>] > >> efax: 32:38 response "CONNECT" > >> efax: 32:38 waiting 30,0 s > >> efax: 32:41 .556 [OK<CR><LF>] > >> efax: 32:41 response "OK" > >> efax: 32:41 sent TCF - channel check of 2700 bytes > >> efax: 32:41 command "+FRS=1" > >> efax: 32:41 waiting 3,0 s > >> efax: 32:41 .656 [OK<CR><LF>] > >> efax: 32:41 response "OK" > >> efax: 32:41 command "+FRH=3" > >> efax: 32:41 waiting 3,0 s > >> efax: 32:41 .936 [CONNECT<CR><LF>] > >> efax: 32:41 response "CONNECT" > >> efax: 32:42 waiting 2,0 s > >> efax: 32:42 .916 [OK<CR><LF>] > >> efax: 32:42 response "OK" > >> efax: 32:42 received 5 bytes: ff c8 21 57 be > >> efax: 32:42 received CFR - channel OK > >> efax: 32:42 command "+FTM=146" > >> efax: 32:42 waiting 3,1 s > >> efax: 32:43 .016 [CONNECT<CR><LF>] > >> efax: 32:43 response "CONNECT" > >> efax: 32:44 padding to 0 bytes/scan line. > >> efax: 32:44 header:[2008/06/28 17:26 +XXXXXXXXXXXXXXXXXXXXX. p. 2/4] > >> efax: 33:07 waiting 30,0 s > >> efax: 33:12 .657 [OK<CR><LF>] > >> efax: 33:12 response "OK" > >> efax: 33:12 sent 20+2292 lines, 51553+0 bytes, 28 s 14729 bps > >> efax: 33:12 command "+FTH=3" > >> efax: 33:12 waiting 3,1 s > >> efax: 33:12 .777 [CONNECT<CR><LF>] > >> efax: 33:12 response "CONNECT" > >> efax: 33:12 sent 3 bytes: ff c8 f2 > >> efax: 33:12 sent MPS - not done > >> efax: 33:12 waiting 13,6 s > >> efax: 33:14 .097 [OK<CR><LF>] > >> efax: 33:14 response "OK" > >> efax: 33:14 command "+FRH=3" > >> efax: 33:14 waiting 3,0 s > >> efax: 33:14 .557 [CONNECT<CR><LF>] > >> efax: 33:14 response "CONNECT" > >> efax: 33:15 waiting 2,0 s > >> efax: 33:15 .537 [OK<CR><LF>] > >> efax: 33:15 response "OK" > >> efax: 33:15 received 5 bytes: ff c8 32 75 ec > >> efax: 33:15 received RTN - page not OK, check channel > >> efax: 33:15 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms > >> efax: 33:15 remote 196lpi 14.4kbps 8.5"/215mm any 2D ECM-64 - 0ms > >> efax: 33:15 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms > >> efax: 33:15 command "+FTH=3" > >> efax: 33:15 waiting 3,1 s > >> efax: 33:15 .617 [CONNECT<CR><LF>] > >> efax: 33:15 response "CONNECT" > >> efax: 33:15 sent 23 bytes: > >> efax: 33:15 ff c0 c2 cc 6c 0c 9c 0c ac 0c 0c ec 04 4c 0c 04 > >> efax: 33:15 9c cc d4 04 04 04 04 > >> efax: 33:15 sent TSI - caller ID > >> efax: 33:15 waiting 13,6 s > >> efax: 33:17 .457 [CONNECT<CR><LF>] > >> efax: 33:17 response "CONNECT" > >> efax: 33:17 sent 6 bytes: ff c8 c1 00 46 1e > >> efax: 33:17 sent DCS - session format > >> efax: 33:17 waiting 13,6 s > >> efax: 33:17 .837 [OK<CR><LF>] > >> efax: 33:17 response "OK" > >> efax: 33:17 command "+FTM=145" > >> efax: 33:17 waiting 3,1 s > >> efax: 33:17 .977 [CONNECT<CR><LF>] > >> efax: 33:17 response "CONNECT" > >> efax: 33:17 waiting 30,0 s > >> efax: 33:21 .137 [OK<CR><LF>] > >> efax: 33:21 response "OK" > >> efax: 33:21 sent TCF - channel check of 2700 bytes > >> efax: 33:21 command "+FRS=1" > >> efax: 33:21 waiting 3,0 s > >> efax: 33:21 .237 [OK<CR><LF>] > >> efax: 33:21 response "OK" > >> efax: 33:21 command "+FRH=3" > >> efax: 33:21 waiting 3,0 s > >> efax: 33:21 .517 [CONNECT<CR><LF>] > >> efax: 33:21 response "CONNECT" > >> efax: 33:22 waiting 2,0 s > >> efax: 33:22 .497 [OK<CR><LF>] > >> efax: 33:22 response "OK" > >> efax: 33:22 received 5 bytes: ff c8 21 57 be > >> efax: 33:22 received CFR - channel OK > >> efax: 33:22 command "+FTM=146" > >> efax: 33:22 waiting 3,1 s > >> efax: 33:22 .597 [CONNECT<CR><LF>] > >> efax: 33:22 response "CONNECT" > >> efax: 33:23 padding to 0 bytes/scan line. > >> efax: 33:23 header:[2008/06/28 17:26 +XXXXXXXXXXXXXXXXXXXXX. p. 2/4] > >> efax: 33:46 waiting 30,0 s > >> efax: 33:52 .238 [OK<CR><LF>] > >> efax: 33:52 response "OK" > >> efax: 33:52 sent 20+2292 lines, 51553+0 bytes, 29 s 14221 bps > >> efax: 33:52 command "+FTH=3" > >> efax: 33:52 waiting 3,1 s > >> efax: 33:52 .358 [CONNECT<CR><LF>] > >> efax: 33:52 response "CONNECT" > >> efax: 33:52 sent 3 bytes: ff c8 f2 > >> efax: 33:52 sent MPS - not done > >> efax: 33:52 waiting 13,6 s > >> efax: 33:53 .678 [OK<CR><LF>] > >> efax: 33:53 response "OK" > >> efax: 33:53 command "+FRH=3" > >> efax: 33:53 waiting 3,0 s > >> efax: 33:54 .138 [CONNECT<CR><LF>] > >> efax: 33:54 response "CONNECT" > >> efax: 33:55 waiting 2,0 s > >> efax: 33:55 .118 [OK<CR><LF>] > >> efax: 33:55 response "OK" > >> efax: 33:55 received 5 bytes: ff c8 32 75 ec > >> efax: 33:55 received RTN - page not OK, check channel > >> efax: 33:55 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms > >> efax: 33:55 remote 196lpi 14.4kbps 8.5"/215mm any 2D ECM-64 - 0ms > >> efax: 33:55 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms > >> efax: 33:55 command "+FTH=3" > >> efax: 33:55 waiting 3,1 s > >> efax: 33:55 .198 [CONNECT<CR><LF>] > >> efax: 33:55 response "CONNECT" > >> efax: 33:55 sent 23 bytes: > >> efax: 33:55 ff c0 c2 cc 6c 0c 9c 0c ac 0c 0c ec 04 4c 0c 04 > >> efax: 33:55 9c cc d4 04 04 04 04 > >> efax: 33:55 sent TSI - caller ID > >> efax: 33:55 waiting 13,6 s > >> efax: 33:57 .038 [CONNECT<CR><LF>] > >> efax: 33:57 response "CONNECT" > >> efax: 33:57 sent 6 bytes: ff c8 c1 00 46 1e > >> efax: 33:57 sent DCS - session format > >> efax: 33:57 waiting 13,6 s > >> efax: 33:57 .418 [OK<CR><LF>] > >> efax: 33:57 response "OK" > >> efax: 33:57 command "+FTM=145" > >> efax: 33:57 waiting 3,1 s > >> efax: 33:57 .558 [CONNECT<CR><LF>] > >> efax: 33:57 response "CONNECT" > >> efax: 33:57 waiting 30,0 s > >> efax: 34:00 .718 [OK<CR><LF>] > >> efax: 34:00 response "OK" > >> efax: 34:00 sent TCF - channel check of 2700 bytes > >> efax: 34:00 command "+FRS=1" > >> efax: 34:00 waiting 3,0 s > >> efax: 34:00 .818 [OK<CR><LF>] > >> efax: 34:00 response "OK" > >> efax: 34:00 command "+FRH=3" > >> efax: 34:00 waiting 3,0 s > >> efax: 34:01 .098 [CONNECT<CR><LF>] > >> efax: 34:01 response "CONNECT" > >> efax: 34:02 waiting 2,0 s > >> efax: 34:02 .058 [OK<CR><LF>] > >> efax: 34:02 response "OK" > >> efax: 34:02 received 5 bytes: ff c8 21 57 be > >> efax: 34:02 received CFR - channel OK > >> efax: 34:02 command "+FTM=146" > >> efax: 34:02 waiting 3,1 s > >> efax: 34:02 .158 [CONNECT<CR><LF>] > >> efax: 34:02 response "CONNECT" > >> efax: 34:03 padding to 0 bytes/scan line. > >> efax: 34:03 header:[2008/06/28 17:26 +XXXXXXXXXXXXXXXXXXXXX. p. 2/4] > >> efax: 34:05 Error: terminating on signal 2 > >> > >> then I have to manually interrupt the process, in order to avoid an endless loop... > >> Any help will be highly appreciated! > >> > >> Federico > >> > > > > > > >
