Jose, linux-header-2.6.21-1.3194.fsc7 resources needed for compiling are notmanifestly ready! If compiling is necessary packages must be installed, providing: kernel-source-2.6.21-1.3194.fc7----------------For Fedora the package is named kernel-devel-2.6.21-1.3194.fsc7.rpm pr similar.Download, Install and just repeat the compiles. MarvS On Sun, May 4, 2008 at 2:44 PM, Jose Fernando de Jesus<jfernando@xxxxxxxxxxxxxxxx> wrote:> Hi Antonio,> I have tried to do what you said, I entered as superuser (although I tried use> sudo before) and typed make and make install and I had the same problem. That> is not me that tries to compile agains kernel headers. It's ungrab-winmodem>> that tries to do it, and it says:> make: *** /lib/modules/2.6.21-1.3194.fc7/build: File or directory not found. Stop.> make: ** [all] Error 2>> This error ocurrs both with make and with make install.>>>> [jfernando@bunitinhu ungrab-winmodem-20080126]$ su> Senha:> [root@bunitinhu ungrab-winmodem-20080126]# ls> Makefile Modules.symvers Module.symvers Readme.txt UngrabError.txt>> ungrab-winmodem.c updates.txt> [root@bunitinhu ungrab-winmodem-20080126]# make>> make modules -C /lib/modules/2.6.21-1.3194.fc7/build> SUBDIRS=/home/jfernando/software/scanMod/ungrab-winmodem-20080126> make: *** /lib/modules/2.6.21-1.3194.fc7/build: Arquivo ou diretório não>> encontrado. Pare.> make: ** [all] Erro 2> [root@bunitinhu ungrab-winmodem-20080126]# make install>> make modules -C /lib/modules/2.6.21-1.3194.fc7/build> SUBDIRS=/home/jfernando/software/scanMod/ungrab-winmodem-20080126> make: *** /lib/modules/2.6.21-1.3194.fc7/build: Arquivo ou diretório não>> encontrado. Pare.> make: ** [all] Erro 2> [root@bunitinhu ungrab-winmodem-20080126]#>>> On Sun, 4 May 2008 09:48:38 -0700 (PDT), Antonio Olivares wrote>>> > Jose,> >> > Here become superuser> > [jfernando@bunitinhu ungrab-winmodem-20080126]$ su> > password:> > [jfernando@bunitinhu ungrab-winmodem-20080126]# make> > [jfernando@bunitinhu ungrab-winmodem-20080126]# make> > install> >> > should do it. There is no need to make against kernel> > headers. The ungrab-winmodem-20080126 does this> > automatically no need to compile against it.> >> > Just type make, make install.> >> > Regards,> >> > Antonio> >> > --- Jose Fernando de Jesus> > <jfernando@xxxxxxxxxxxxxxxx> wrote:> >> > > Hi, I have run scanModem and I have seen that I> > > can use slmodem +> > > ungrab-winmodem, but when I try to compile> > > ungrab-winmodem I have the> > > following error:> > >> > > [jfernando@bunitinhu ungrab-winmodem-20080126]$ ls> > > Makefile Modules.symvers Module.symvers> > > Readme.txt ungrab-winmodem.c> > > updates.txt> > > [jfernando@bunitinhu ungrab-winmodem-20080126]$ sudo> > > make> > > make modules -C /lib/modules/2.6.21-1.3194.fc7/build> > >> > SUBDIRS=/home/jfernando/software/scanMod/ungrab-winmodem-20080126> > > make: *** /lib/modules/2.6.21-1.3194.fc7/build:> > > Arquivo ou diretorio não> > > encontrado. Pare.> > > make: ** [all] Erro 2> > > [jfernando@bunitinhu ungrab-winmodem-20080126]$ ls> > > /lib/modules/2.6.21-1.3194.fc7/build> > > /lib/modules/2.6.21-1.3194.fc7/build> > > [jfernando@bunitinhu ungrab-winmodem-20080126]$ ls> > > -l> > > /lib/modules/2.6.21-1.3194.fc7/build> > > lrwxrwxrwx 1 root root 47 2007-07-16 13:59> > > /lib/modules/2.6.21-1.3194.fc7/build ->> > > ../../../usr/src/kernels/2.6.21-1.3194.fc7-i686> > > [jfernando@bunitinhu ungrab-winmodem-20080126]$> > >> > > Which means:> > >> > > make: *** /lib/modules/2.6.21-1.3194.fc7/build: File> > > or directory not found.> > > Stop.> > >> > > But when I look for the mentione file with ls -l, I> > > find it and it seems that> > > it is a link to the kernel. What could be that?> > > ModemData.txt comes in sequence. Thank you.> > >> > > Only plain text email is forwarded by the> > > Discuss@xxxxxxxxxxxxx List Server,> > > as HTML can contain viruses. Use as the email> > > Subject Line:> > > YourName, YourCountry Fedora release 7> > > (Moonshine)> > > Kernel kernel 2.6.21-1.3194.fc7> > > With this Subject Line cogent experts will be> > > alerted, and useful case names> > > left in the Archive.> > > YourCountry will enable Country specific guidance.> > > Your contry's local Linux> > > experts> > > can be found through:> > > http://www.linux.org/groups/index.html.> > > They will know your Country's modem code, which may> > > be essential for dialup> > > service.> > > Responses from Discuss@xxxxxxxxxxxxx are sometimes> > > blocked by an Internet> > > Provider mail filters.> > > So in a day, also check the Archived responses at> > > http://www.linmodems.org> > > -------------------------- System information> > > ----------------------------> > > CPU=i686, Fedora release 7 (Moonshine)> > > Kernel> > > Linux version 2.6.21-1.3194.fc7> > > (kojibuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc> > > version 4.1.2 20070502> > > (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT> > > 2007> > > scanModem update of: 2008_05_01> > >> > > There are no blacklisted modem drivers in> > > /etc/modprobe* files> > > Attached USB devices are:> > > ID 0a81:0101 Chesen Electronics Corp. Keyboard> > >> > > USB modems not recognized> > > For candidate card in slot 01:03.0, firmware> > > information and bootup> > > diagnostics are:> > > PCI slot PCI ID SubsystemID Name> > > ---------- --------- --------- --------------> > > 01:03.0 1057:3052 1057:3020 Modem: Motorola SM56> > > Data Fax Modem> > >> > > Modem interrupt assignment and sharing:> > > 16: 0 0 IO-APIC-fasteoi> > > uhci_hcd:usb3, libata> > > --- Bootup diagnostics for card in PCI slot 01:03.0> > > ----> > > ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 18> > > (level, low) -> IRQ 16> > > 0000:01:03.0: ttyS1 at I/O 0xa008 (irq = 16) is a> > > 16450> > > 0000:01:03.0: ttyS2 at I/O 0xa010 (irq = 16) is a> > > 8250> > > 0000:01:03.0: ttyS3 at I/O 0xa018 (irq = 16) is a> > > 16450> > > Couldn't register serial port 0000:01:03.0: -28> > >> > > === Finished firmware and bootup diagnostics, next> > > deducing cogent software. ===> > >> > > Predictive diagnostics for card in bus 01:03.0:> > > Modem chipset detected on> > > CLASS="Class 0703: 1057:3052"> > > NAME="Modem: Motorola SM56 Data Fax Modem "> > > PCIDEV=1057:3052> > > SUBSYS=1057:3020> > > IRQ=16> > > IDENT=slamr> > >> > > For candidate modem in: 01:03.0> > > Class 0703: 1057:3052 Modem: Motorola SM56 Data> > > Fax Modem> > > Primary PCI_id 1057:3052> > > Support type needed or chipset: slamr> > >> > >> > > ----------------end Softmodem section --------------> > >> > > 1057:3052 has a Motorola chipset, poorly supported> > > by Motorola itself> > > However Zello discovered that drivers written to> > > support Smartlink modems do> > > support the 1057:3052 chipset!!> > > It sufficed to add 1057:3052 to the list of modem> > > cards recognized by the> > > Smartlink slamr driver.> > > There is a ungrab-winmodem driver used in> > > conjunction with slamr, which must> > > have 1057:3052> > > similarly added. See messages from Zello:> > >> > >> > http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html> > >> > >> > http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html> > > and Alvaro Aguirre about the ungrab-winmodem fix:> > >> > >> > http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html> > > For general guidance on ungrab-winmodem + slamr> > > usage, read the Smartlink.txt> > >> > > The modem is supported by the Smartlink slamr driver> > > plus the slmodemd helper utility. Read the> > > Smartlink.txt and Modem/YourSystem.txt for follow> > > through guidance.> > >> > >> > > For 2.6.21-1.3194.fc7 compiling drivers is> > > necessary. As of October 2007 the> > > current packages at> > > http://linmodems.technion.ac.il/packages/smartlink/> > > are the> > > ungrab-winmodem-20070505.tar.gz and> > > slmodem-2.9.11-20080126.tar.gz> > >> > > Writing Smartlink.txt> > > ============ end Smartlink section> > > =====================> > >> > > Completed candidate modem analyses.> > >> > > The base of the UDEV device file system is:> > > /dev/.udev> > >> > > Versions adequately match for the compiler> > > installed: 4.1.2> > > and the compiler used in kernel> > > assembly: 4.1.2> > >> > > linux-headers-2.6.21-1.3194.fc7 resources needed> > > for compiling are not> > > manifestly ready!> > >> > > If compiling is necessary packages must be> > > installed, providing:> > > kernel-source-2.6.21-1.3194.fc7> > >> > >> > > If a driver compilation fails, with message> > > including some lack of some> > > FileName.h (stdio.h for example), then> > > Some additional kernel-header files need> > > installation to /usr/include. The> > > minimal additional packages are libc6-dev> > > and any of its dependents, under Ubuntu> > > linux-libc-dev> > >> > > If an alternate ethernet connection is available,> > > $ apt-get update> > > $ apt-get -s install linux-kernel-devel> > > will install needed package> > > For Debian/Ubuntu related distributions, run the> > > following command to display> > > the needed package list:> > >> > > Otherwise packages have to be found through> > > http://packages.ubuntu.com> > >> > === message truncated ===> >> >> ____________________________________________________________________________________> > Be a better friend, newshound, and> > know-it-all with Yahoo! Mobile. Try it now.> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ>>>> José Fernando de Jesus> Physics Graduated> PhD Student on Cosmology (IAG-USP)> Rua do Matão 1226> Cidade Universitária> 05508-900 São Paulo SP> Brasil>> Phone: 55 11 30912732> email: jfernando@xxxxxxxxxxxxxxxx> (:¿(c)2007(c)?:)> Rock'n'Roll!>>
