Hi Antonio, I have tried to do what you said, I entered as superuser (although I tried use sudo before) and typed make and make install and I had the same problem. That is not me that tries to compile agains kernel headers. It's ungrab-winmodem that tries to do it, and it says: make: *** /lib/modules/2.6.21-1.3194.fc7/build: File or directory not found. Stop. make: ** [all] Error 2 This error ocurrs both with make and with make install. [jfernando@bunitinhu ungrab-winmodem-20080126]$ su Senha: [root@bunitinhu ungrab-winmodem-20080126]# ls Makefile Modules.symvers Module.symvers Readme.txt UngrabError.txt ungrab-winmodem.c updates.txt [root@bunitinhu ungrab-winmodem-20080126]# make make modules -C /lib/modules/2.6.21-1.3194.fc7/build SUBDIRS=/home/jfernando/software/scanMod/ungrab-winmodem-20080126 make: *** /lib/modules/2.6.21-1.3194.fc7/build: Arquivo ou diretório não encontrado. Pare. make: ** [all] Erro 2 [root@bunitinhu ungrab-winmodem-20080126]# make install make modules -C /lib/modules/2.6.21-1.3194.fc7/build SUBDIRS=/home/jfernando/software/scanMod/ungrab-winmodem-20080126 make: *** /lib/modules/2.6.21-1.3194.fc7/build: Arquivo ou diretório não encontrado. Pare. make: ** [all] Erro 2 [root@bunitinhu ungrab-winmodem-20080126]# On Sun, 4 May 2008 09:48:38 -0700 (PDT), Antonio Olivares wrote > Jose, > > Here become superuser > [jfernando@bunitinhu ungrab-winmodem-20080126]$ su > password: > [jfernando@bunitinhu ungrab-winmodem-20080126]# make > [jfernando@bunitinhu ungrab-winmodem-20080126]# make > install > > should do it. There is no need to make against kernel > headers. The ungrab-winmodem-20080126 does this > automatically no need to compile against it. > > Just type make, make install. > > Regards, > > Antonio > > --- Jose Fernando de Jesus > <jfernando@xxxxxxxxxxxxxxxx> wrote: > > > Hi, I have run scanModem and I have seen that I > > can use slmodem + > > ungrab-winmodem, but when I try to compile > > ungrab-winmodem I have the > > following error: > > > > [jfernando@bunitinhu ungrab-winmodem-20080126]$ ls > > Makefile Modules.symvers Module.symvers > > Readme.txt ungrab-winmodem.c > > updates.txt > > [jfernando@bunitinhu ungrab-winmodem-20080126]$ sudo > > make > > make modules -C /lib/modules/2.6.21-1.3194.fc7/build > > > SUBDIRS=/home/jfernando/software/scanMod/ungrab-winmodem-20080126 > > make: *** /lib/modules/2.6.21-1.3194.fc7/build: > > Arquivo ou diretorio não > > encontrado. Pare. > > make: ** [all] Erro 2 > > [jfernando@bunitinhu ungrab-winmodem-20080126]$ ls > > /lib/modules/2.6.21-1.3194.fc7/build > > /lib/modules/2.6.21-1.3194.fc7/build > > [jfernando@bunitinhu ungrab-winmodem-20080126]$ ls > > -l > > /lib/modules/2.6.21-1.3194.fc7/build > > lrwxrwxrwx 1 root root 47 2007-07-16 13:59 > > /lib/modules/2.6.21-1.3194.fc7/build -> > > ../../../usr/src/kernels/2.6.21-1.3194.fc7-i686 > > [jfernando@bunitinhu ungrab-winmodem-20080126]$ > > > > Which means: > > > > make: *** /lib/modules/2.6.21-1.3194.fc7/build: File > > or directory not found. > > Stop. > > > > But when I look for the mentione file with ls -l, I > > find it and it seems that > > it is a link to the kernel. What could be that? > > ModemData.txt comes in sequence. Thank you. > > > > Only plain text email is forwarded by the > > Discuss@xxxxxxxxxxxxx List Server, > > as HTML can contain viruses. Use as the email > > Subject Line: > > YourName, YourCountry Fedora release 7 > > (Moonshine) > > Kernel kernel 2.6.21-1.3194.fc7 > > With this Subject Line cogent experts will be > > alerted, and useful case names > > left in the Archive. > > YourCountry will enable Country specific guidance. > > Your contry's local Linux > > experts > > can be found through: > > http://www.linux.org/groups/index.html. > > They will know your Country's modem code, which may > > be essential for dialup > > service. > > Responses from Discuss@xxxxxxxxxxxxx are sometimes > > blocked by an Internet > > Provider mail filters. > > So in a day, also check the Archived responses at > > http://www.linmodems.org > > -------------------------- System information > > ---------------------------- > > CPU=i686, Fedora release 7 (Moonshine) > > Kernel > > Linux version 2.6.21-1.3194.fc7 > > (kojibuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc > > version 4.1.2 20070502 > > (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT > > 2007 > > scanModem update of: 2008_05_01 > > > > There are no blacklisted modem drivers in > > /etc/modprobe* files > > Attached USB devices are: > > ID 0a81:0101 Chesen Electronics Corp. Keyboard > > > > USB modems not recognized > > For candidate card in slot 01:03.0, firmware > > information and bootup > > diagnostics are: > > PCI slot PCI ID SubsystemID Name > > ---------- --------- --------- -------------- > > 01:03.0 1057:3052 1057:3020 Modem: Motorola SM56 > > Data Fax Modem > > > > Modem interrupt assignment and sharing: > > 16: 0 0 IO-APIC-fasteoi > > uhci_hcd:usb3, libata > > --- Bootup diagnostics for card in PCI slot 01:03.0 > > ---- > > ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 18 > > (level, low) -> IRQ 16 > > 0000:01:03.0: ttyS1 at I/O 0xa008 (irq = 16) is a > > 16450 > > 0000:01:03.0: ttyS2 at I/O 0xa010 (irq = 16) is a > > 8250 > > 0000:01:03.0: ttyS3 at I/O 0xa018 (irq = 16) is a > > 16450 > > Couldn't register serial port 0000:01:03.0: -28 > > > > === Finished firmware and bootup diagnostics, next > > deducing cogent software. === > > > > Predictive diagnostics for card in bus 01:03.0: > > Modem chipset detected on > > CLASS="Class 0703: 1057:3052" > > NAME="Modem: Motorola SM56 Data Fax Modem " > > PCIDEV=1057:3052 > > SUBSYS=1057:3020 > > IRQ=16 > > IDENT=slamr > > > > For candidate modem in: 01:03.0 > > Class 0703: 1057:3052 Modem: Motorola SM56 Data > > Fax Modem > > Primary PCI_id 1057:3052 > > Support type needed or chipset: slamr > > > > > > ----------------end Softmodem section -------------- > > > > 1057:3052 has a Motorola chipset, poorly supported > > by Motorola itself > > However Zello discovered that drivers written to > > support Smartlink modems do > > support the 1057:3052 chipset!! > > It sufficed to add 1057:3052 to the list of modem > > cards recognized by the > > Smartlink slamr driver. > > There is a ungrab-winmodem driver used in > > conjunction with slamr, which must > > have 1057:3052 > > similarly added. See messages from Zello: > > > > > http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html > > > > > http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html > > and Alvaro Aguirre about the ungrab-winmodem fix: > > > > > http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html > > For general guidance on ungrab-winmodem + slamr > > usage, read the Smartlink.txt > > > > The modem is supported by the Smartlink slamr driver > > plus the slmodemd helper utility. Read the > > Smartlink.txt and Modem/YourSystem.txt for follow > > through guidance. > > > > > > For 2.6.21-1.3194.fc7 compiling drivers is > > necessary. As of October 2007 the > > current packages at > > http://linmodems.technion.ac.il/packages/smartlink/ > > are the > > ungrab-winmodem-20070505.tar.gz and > > slmodem-2.9.11-20080126.tar.gz > > > > Writing Smartlink.txt > > ============ end Smartlink section > > ===================== > > > > Completed candidate modem analyses. > > > > The base of the UDEV device file system is: > > /dev/.udev > > > > Versions adequately match for the compiler > > installed: 4.1.2 > > and the compiler used in kernel > > assembly: 4.1.2 > > > > linux-headers-2.6.21-1.3194.fc7 resources needed > > for compiling are not > > manifestly ready! > > > > If compiling is necessary packages must be > > installed, providing: > > kernel-source-2.6.21-1.3194.fc7 > > > > > > If a driver compilation fails, with message > > including some lack of some > > FileName.h (stdio.h for example), then > > Some additional kernel-header files need > > installation to /usr/include. The > > minimal additional packages are libc6-dev > > and any of its dependents, under Ubuntu > > linux-libc-dev > > > > If an alternate ethernet connection is available, > > $ apt-get update > > $ apt-get -s install linux-kernel-devel > > will install needed package > > For Debian/Ubuntu related distributions, run the > > following command to display > > the needed package list: > > > > Otherwise packages have to be found through > > http://packages.ubuntu.com > > > === message truncated === > > ____________________________________________________________________________________ > Be a better friend, newshound, and > know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ José Fernando de Jesus Physics Graduated PhD Student on Cosmology (IAG-USP) Rua do Matão 1226 Cidade Universitária 05508-900 São Paulo SP Brasil Phone: 55 11 30912732 email: jfernando@xxxxxxxxxxxxxxxx (:¿©2007©?:) Rock'n'Roll!
