Hii...,
I have done wat you have said, did setup slmodemd using
slmodemd -c INDIA --alsa hw:0,6
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/2
But when i tried to use the System>Administration>Network Module it showed an Exception like this:
***********************************************************************************************************************************************************************************
Component: system-config-network
Version: 1.4.3
Summary: TB9ed2a994 NCHardwareList.py:696:load:ValueError: invalid literal for int() with base 10: 'None'
Traceback (most recent call last):
File "/usr/sbin/system-config-network-gui", line 166, in runit
window = mainDialog()
File "/usr/share/system-config-network/netconfpkg/gui/maindialog.py", line 253, in __init__
self.load()
File "/usr/share/system-config-network/netconfpkg/gui/maindialog.py", line 277, in load
self.loadHardware()
File "/usr/share/system-config-network/netconfpkg/gui/maindialog.py", line 289, in loadHardware
hardwarelist = getHardwareList()
File "/usr/share/system-config-network/netconfpkg/NCHardwareList.py", line 780, in getHardwareList
__HWList.load()
File "/usr/share/system-config-network/netconfpkg/NCHardwareList.py", line 696, in load
hw.Modem.ModemVolume = int(wvdial[dev]['SetVolume'])
ValueError: invalid literal for int() with base 10: 'None'
Local variables in innermost frame:
hwconf: <netconfpkg.NCHardwareList.ConfHWConf instance at 0x8c6fa4c>
i: 2
self: HardwareList.Ethernet.eth0.Status=ok
HardwareList.Ethernet.eth0.Name=eth0
HardwareList.Ethernet.eth0.Type=Ethernet
HardwareList.Ethernet.eth0.Card.ModuleName=r8169
HardwareList.Ethernet.eth0.Description=Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet
HardwareList.Wireless.eth1.Status=ok
HardwareList.Wireless.eth1.Name=eth1
HardwareList.Wireless.eth1.Type=Wireless
HardwareList.Wireless.eth1.Card.ModuleName=ipw2200
HardwareList.Wireless.eth1.Description=Intel Corporation PRO/Wireless 2915ABG Network Connection
HardwareList.Modem.Modem0.Status=configured
HardwareList.Modem.Modem0.Name=Modem0
HardwareList.Modem.Modem0.Modem.DeviceName=/dev/ttySLT0
HardwareList.Modem.Modem0.Modem.BaudRate=115200
HardwareList.Modem.Modem0.Type=Modem
HardwareList.Modem.Modem0.Description=Generic Modem
isdncard: <netconfpkg.NCisdnhardware.ConfISDN instance at 0x8e7c40c>
hw: Hardware.Status=configured
Hardware.Name=Modem0
Hardware.Modem.DeviceName=/dev/ttySLT0
Hardware.Modem.BaudRate=115200
Hardware.Type=Modem
Hardware.Description=Generic Modem
dev: Modem0
wvdial: <netconfpkg.conf.ConfSMB.ConfSMB instance at 0x8e7c52c
************************************************************************************************************************************************************************************
When i tried wvdial on the termial it gave a report:
[Bets@localhost ~]$ wvdial
--> WvDial: Internet dialer version 1.60
--> Warning: section [Dialer Defaults] does not exist in wvdial.conf.
--> Cannot open /dev/modem: Device or resource busy
--> Cannot open /dev/modem: Device or resource busy
--> Cannot open /dev/modem: Device or resource busy
and when i tried :
[Bets@localhost ~]$ wvdialconf /etc/wvial.conf
Editing `/etc/wvial.conf'.
Scanning your serial ports for a modem.
ttyS0<Info>: Device or resource busy
Modem Port Scan<*1>: S0
ttyS1<Info>: Device or resource busy
Modem Port Scan<*1>: S1
ttyS2<Info>: Device or resource busy
Modem Port Scan<*1>: S2
ttyS3<Info>: Device or resource busy
Modem Port Scan<*1>: S3
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>.
*******************************************************************************************************************************************************************************
what does all that mean....I'm all confused now....Please do help me.....have been stuck up with this for days.....
----- Original Message ----
From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
To: sasidharan dhanya <betty_63ae@xxxxxxxxx>
Cc: discuss@xxxxxxxxxxxxx
Sent: Monday, 21 April, 2008 5:40:55 PM
Subject: Re: Dhanya Sasi, India Fedora release 8 (Werewolf) Kernel kernel 2.6.23.1-42.fc8
Dhanya
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack
under Linux with:
$ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
slmodemd -c INDIA --alsa hw:0,6
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
On Mon, Apr 21, 2008 at 12:47 AM, sasidharan dhanya
<betty_63ae@xxxxxxxxx> wrote:
> Hii,
>
I'm a newbie to Linux and hav recently loaded Fedora core 8onto my
laptop. I have used scanModem and hav snd 'd ModemData.txt along with
this mail.What should I do next???Help required...urgent
>
> Dhanya Sasi
>
Best Jokes, Best Friends, Best Food and more. Go to http://in.promos.yahoo.com/groups/bestofyahoo/
