Attached files:
(1) ModemData.txt from scanModem
(2) wvtestdial from 'wvdialconf wvtest' & 'wvdial --config wvtest'
(Running under Mandriva 2008.0 PP on Toshiba laptop.)
Using the KPPP dialler, I can obtain a usable connection, but can hear no
sounds (dialling tones, negotiation squawks) from the modem (although I can
if I use the modem from Windows Vista) - although the M1L3 command was used.
As can be seen from attachment (2), I have also tried WVDIAL, but it kept
reporting NO CARRIER.
Is there a way of obtaining sound from the modem?
--
/\/\aurice Batey
(Retired in Surrey, UK)
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry Mandriva Linux release 2008.0 (Official) for x86_64
Kernel 2.6.22.14-laptop-1.uc1mdv on a Dual-processor x86_64 / kernel 2.6.22.14-laptop-1.uc1mdv
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's local Linux experts
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=x86_64, Mandriva Linux release 2008.0 (Official) for x86_64
Kernel 2.6.22.14-laptop-1.uc1mdv on a Dual-processor x86_64 /
Linux version 2.6.22.14-laptop-1.uc1mdv (mandrake@xxxxxxxxxxxxxxxxxxx) (gcc version 4.2.2 20070909 (prerelease) (4.2.2-0.RC.1mdv2008.0)) #1 SMP Wed Dec 5 13:01:16 EST 2007
scanModem update of: 2008_03_25
There are no blacklisted modem drivers in /etc/modprobe* files
USB modem not detected by lsusb
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 1179:0001 Audio device: Intel Corporation 82801G
Modem interrupt assignment and sharing:
22: 47430 0 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
PCI slot 00:1b.0 has a High Definition Audio Card
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.15rc1
The modem cards detected by "aplay -l" are:
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
The /proc/asound/pcm file reports:
-----------------------
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-02: ALC262 Analog : ALC262 Analog : capture 2
00-00: ALC262 Analog : ALC262 Analog : playback 1 : capture 2
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0x5a080000 irq 22
The modem codec file for the the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Generic 11c1 Si3054
Address: 1
Vendor Id: 0x11c13026
Subsystem Id: 0x11790001
Revision Id: 0x100700
Modem Function Group: 0x1
The audio card hosts a softmodem chip: 0x11c13026
The softmodem chip 0x11c13026 is in principle supported by the COMM support of slmodemd
and the joint snd-hda-intel audio+modem driver, begun with ALSA version 1.0.13.
For HDA cards with ALC883 chips, an upgrade to ALSA verions 1.0.15 way be necessary. Instructions for upgrading snd-hda-intel and its dependent driver set are at: http://linmodems.technion.ac.il/archive-seventh/msg00282.html
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
CLASS="Class 0403: 8086:27d8"
NAME="Audio device: Intel Corporation 82801G "
PCIDEV=8086:27d8
SUBSYS=1179:0001
IRQ=22
HDA=8086:27d8
SOFT=8086:27d8.HDA
CodecArchived=11c13026
CHIP=0x11c13026
IDENT=slmodemd
SLMODEMD_DEVICE=hw:0,6
Driver=snd-hda-intel
For candidate modem in: 00:1b.0
Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
Primary PCI_id 8086:27d8
Subsystem PCI_id 1179:0001
Softmodem codec or chipset from diagnostics: 0x11c13026
from Archives: 0x11c13026, residing on a HDA Subsystem with support by slmodemd and driver snd-hda-intel
The HDA card softmodem chip is 0x11c13026
Support type needed or chipset: slmodemd supporting the snd-hda-intel audio+modem driver
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.2.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
slmodemd -c YOUR_COUNTRY --alsa hw:0,6
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
----------------end Softmodem section --------------
Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
The kernel was compiled with gcc version 4.2.2 and a compiler is not installed
linux-headers-2.6.22.14-laptop-1.uc1mdv resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
gcc-4.2 make kernel-source-2.6.22.14-laptop-1.uc1mdv
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed package
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
wvdialconf wvtest
Editing `wvtest'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttySL0<*1>: ATQ0 V1 E1 -- OK
ttySL0<*1>: ATQ0 V1 E1 Z -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem
ttySL0<*1>: Speed 4800: AT -- OK
ttySL0<*1>: Speed 9600: AT -- OK
ttySL0<*1>: Speed 19200: AT -- OK
ttySL0<*1>: Speed 38400: AT -- OK
ttySL0<*1>: Speed 57600: AT -- OK
ttySL0<*1>: Speed 115200: AT -- OK
ttySL0<*1>: Speed 230400: AT -- OK
ttySL0<*1>: Speed 460800: AT -- OK
ttySL0<*1>: Max speed is 460800; that should be safe.
ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Found a modem on /dev/ttySL0.
wvtest<Warn>: Can't open 'wvtest' for reading: No such file
or directory
wvtest<Warn>: ...starting with blank configuration.
Modem configuration written to wvtest.
ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2
+FCLASS=0"
-----------------------------------------------------------
wvdial --config wvtest
--> WvDial: Internet dialer version 1.5.90
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 X3 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 X3 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT08450804998
--> Waiting for carrier.
ATDT08450804998
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT08450804998
--> Waiting for carrier.
ATDT08450804998
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT08450804998
--> Waiting for carrier.
ATDT08450804998
z=
[1]+ Stopped wvdial --config wvtest
