Mick THough unusual in UK, NO DIALTONE, can be due to low line voltages. First check than an ordinary phone works on that line, Then try Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 with X3 meaning "dial without dialtone" This is commonly needed in Italy MarvS On Feb 3, 2008 11:55 AM, <m.denton@xxxxxxxxxxxxxxx> wrote: > Marvin, > > Here is the appropriate wvdial.conf > > [Dialer Defaults] > Modem = /dev/ttySL0 > Baud = 460800 > Init1 = ATZ > # Init1 = ATX > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > Init3 = AT+MS=34 > #Init4 = ATH1 > ISDN = 0 > #New PPPD = yes > Modem Type = Analog Modem > #Phone = **** > Phone = **** > Username = **** > Password = **** > Carrier Check = no > #Stupid Mode = 0 > > and the error log... > > [root@unknown-00-07-95-09-71-29 ~]# slmodemd -c UK --log --debug=2 > /dev/slusb0 > SmartLink Soft Modem: version 2.9.11 Feb 2 2008 21:45:23 > <642.505047> SmartLink Soft Modem: version 2.9.11 Feb 2 2008 21:45:23 > <642.521858> slusb0: startup modem... > <642.538461> slusb0: update termios... > symbolic link `/dev/ttySL0' -> `/dev/pts/4' created. > modem `slusb0' created. TTY is `/dev/pts/4' > <642.585220> open file: /var/lib/slmodem/data.slusb0... > <642.603374> main: rt applyed: SCHED_FIFO, pri 99 > Use `/dev/ttySL0' as modem device, Ctrl+C for termination. > <647.878706> main: termios changed. > <647.878850> slusb0: update termios... > <647.980060> main: termios changed. > <647.980215> slusb0: update termios... > <648.084262> slusb0: run cmd: ATZ > <648.084420> slusb0: modem reset... > <648.084450> slusb0: modem set state: 1 --> 1... > <648.084488> slusb0: modem set mode: -> 0... > <648.084516> slusb0: modem report result: 0 (OK) > <648.184345> slusb0: run cmd: ATQ0V1E1S0=0&C1&D2+FCLASS=0 > <648.184549> slusb0: modem set mode: -> 0... > <648.184584> slusb0: modem report result: 0 (OK) > <648.284306> slusb0: run cmd: AT+MS=34 > <648.284490> slusb0: modem report result: 0 (OK) > <648.384581> slusb0: run cmd: ATDT**** > <648.384829> slusb0: modem dial: T***** > <648.384863> slusb0: modem_dial_start... > <648.386033> slusb0: modem_start.. > <648.386063> slusb0: modem set state: 1 --> 2... > <648.386093> slusb0: new state: DP_ESTAB > <648.386120> main: modemap_ioctl: cmd 8, arg 3... > <648.386158> slusb0: modem set hook: 0 --> 1... > <648.386186> main: modemap_ioctl: cmd 2, arg 1... > <648.388218> main: modemap_ioctl: cmd 11, arg 0... > <648.388695> main: modemap_ioctl: cmd 4, arg 2580... > <648.388736> main: modemap_ioctl: cmd 7, arg 30... > <648.388766> main: modemap_start... > <653.410324> slusb0: modem_update_status: 16 > <653.410379> slusb0: --> FINISH. > <653.410406> slusb0: modem_hup... > <653.410432> slusb0: modem set state: 2 --> 9... > <653.410459> slusb0: new state: DP_DISC > <653.410498> slusb0: modem_stop.. > <653.410522> main: modemap_stop... > <653.422140> slusb0: modem set hook: 1 --> 0... > <653.422395> main: modemap_ioctl: cmd 2, arg 0... > <653.424182> main: modemap_ioctl: cmd 8, arg 0... > <653.424502> slusb0: modem set state: 9 --> 1... > <653.424532> slusb0: new state: MODEM_IDLE > <653.424559> slusb0: modem report result: 6 (NO DIALTONE) > <653.532903> main: termios changed. > <653.533009> slusb0: update termios... > <653.533114> main: pty closed. > > This time, NO DIALTONE, rather than repeated NO CARRIER. > > Cheers, > > Mick > > > > Mike, > > > > > > Please retest with settings > > Init1 = ATZ > > # Init1 = ATX > > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > Init3 = AT+MS=34 > > #Init4 = ATH1 > > > > > > And again generate the debug log > > > > > > MarvS > > > > > > On Feb 3, 2008 8:27 AM, <m.denton@xxxxxxxxxxxxxxx> wrote: > > > >> Hi Marvin, > >> > >> > >> Thanks for your suggestions. Requested code output is copied below. > >> I'm > >> actually glad it is a bug...I was beginning to think my foo had failed > >> :-) > >> > >> > >> Any chance of a workaround in the short/long term? Or shall I give it > >> up as a bad job? Any other suggestions? > >> > >> Cheers, > >> > >> > >> Mick > >> > >> > >> =========== > >> > >> > >>> Try commenting out the > >>> Stupid Mode > >>> it can actually interfere sometimes Otherwise your wvdial.conf looks > >>> OK > >>> > >> > >> Noted. Tried without success. > >> > >> > >>> Send us the terminal part of /var/log/messages > >>> covering the dialout attempt. > >> > >> tail -f /var/log/messages doesn't change during the dialout attempt. > >> > >> The following lines are in my /var/log/messages from when I reboot and > >> 'may' be relevant??? > >> > >> > >> Feb 3 13:12:16 unknown-00-07-95-09-71-29 kernel: slusb: module license > >> 'Smart Link Ltd.' taints kernel. > >> Feb 3 13:12:16 unknown-00-07-95-09-71-29 kernel: Symbol > >> usb_register_driver is being used by a non-GPL module, which will not be > >> allowed in the future Feb 3 13:12:16 unknown-00-07-95-09-71-29 kernel: > >> Please see the file > >> Documentation/feature-removal-schedule.txt in the kernel source tree for > >> more details. Feb 3 13:12:16 unknown-00-07-95-09-71-29 kernel: Symbol > >> usb_deregister is being used by a non-GPL module, which will not be > >> allowed in the future Feb 3 13:12:16 unknown-00-07-95-09-71-29 kernel: > >> Please see the file > >> Documentation/feature-removal-schedule.txt in the kernel source tree for > >> more details. Feb 3 13:12:16 unknown-00-07-95-09-71-29 kernel: ST7554 > >> USB Modem. > >> Feb 3 13:12:16 unknown-00-07-95-09-71-29 kernel: input: PC Speaker as > >> /class/input/input2 > >> Feb 3 13:12:16 unknown-00-07-95-09-71-29 kernel: <6>slusb: slusb0 is > >> found. Feb 3 13:12:16 unknown-00-07-95-09-71-29 kernel: usbcore: > >> registered new driver ST7554 USB Modem > >> > >> > >> > >> > >>> Also start slmodemd with > >>> # slmodemd -c UK --log --debug=2 /dev/slusb0 > >>> and send us the log after the wvdial session terminates. > >> > >> [root@localhost slmodem-2.9.11-20061021]# slmodemd -c UK --log > >> --debug=2 > >> /dev/slusb0 > >> SmartLink Soft Modem: version 2.9.11 Feb 2 2008 21:45:23 > >> <332.505019> SmartLink Soft Modem: version 2.9.11 Feb 2 2008 21:45:23 > >> <332.514412> slusb0: startup modem... > >> <332.523878> slusb0: update termios... > >> symbolic link `/dev/ttySL0' -> `/dev/pts/4' created. modem `slusb0' > >> created. TTY is `/dev/pts/4' <332.551826> open file: > >> /var/lib/slmodem/data.slusb0... > >> <332.563497> main: rt applyed: SCHED_FIFO, pri 99 > >> Use `/dev/ttySL0' as modem device, Ctrl+C for termination. > >> <336.488469> main: termios changed. > >> <336.488588> slusb0: update termios... > >> <336.602488> main: termios changed. > >> <336.602682> slusb0: update termios... > >> <336.705331> slusb0: run cmd: ATX > >> <336.705491> slusb0: modem report result: 0 (OK) > >> <336.805477> slusb0: run cmd: ATQ0V1E1S0=0&C1&D2+FCLASS=0 > >> <336.805658> slusb0: modem set mode: -> 0... > >> <336.805690> slusb0: modem report result: 0 (OK) > >> <336.905411> slusb0: run cmd: AT+MS=34 > >> <336.905573> slusb0: modem report result: 0 (OK) > >> <337.005426> slusb0: run cmd: ATH1 > >> <337.005584> slusb0: modem hook... > >> <337.005614> slusb0: modem set hook: 0 --> 1... > >> <337.005640> main: modemap_ioctl: cmd 2, arg 1... > >> <337.007668> slusb0: modem report result: 0 (OK) > >> <337.117985> slusb0: run cmd: ATDT********** > >> <337.118177> slusb0: modem dial: T********** > >> <337.118208> slusb0: modem_dial_start... > >> <337.119273> slusb0: modem_start.. > >> <337.119300> slusb0: modem set state: 1 --> 2... > >> <337.119328> slusb0: new state: DP_ESTAB > >> <337.119354> main: modemap_ioctl: cmd 8, arg 3... > >> <337.119385> slusb0: modem set hook: 1 --> 1... > >> <337.119415> main: modemap_ioctl: cmd 11, arg 0... > >> <337.119601> main: modemap_ioctl: cmd 4, arg 2580... > >> <337.119631> main: modemap_ioctl: cmd 7, arg 30... > >> <337.119659> main: modemap_start... > >> <397.120149> slusb0: modem_tty_write: hangup... > >> <397.120228> slusb0: modem_hup... > >> <397.120254> slusb0: modem set state: 2 --> 9... > >> <397.120282> slusb0: new state: DP_DISC > >> <397.125202> slusb0: modem_stop.. > >> <397.125292> main: modemap_stop... > >> <397.136906> slusb0: modem set hook: 1 --> 0... > >> <397.137118> main: modemap_ioctl: cmd 2, arg 0... > >> <397.138849> main: modemap_ioctl: cmd 8, arg 0... > >> <397.139020> slusb0: modem set state: 9 --> 1... > >> <397.139046> slusb0: new state: MODEM_IDLE > >> <397.139073> slusb0: modem report result: 3 (NO CARRIER) > >> <337.117985> slusb0: run cmd: ATDT********* > >> <337.118177> slusb0: modem dial: T********* > >> <337.118208> slusb0: modem_dial_start... > >> <337.119273> slusb0: modem_start.. > >> <337.119300> slusb0: modem set state: 1 --> 2... > >> <337.119328> slusb0: new state: DP_ESTAB > >> <337.119354> main: modemap_ioctl: cmd 8, arg 3... > >> <337.119385> slusb0: modem set hook: 1 --> 1... > >> <337.119415> main: modemap_ioctl: cmd 11, arg 0... > >> <337.119601> main: modemap_ioctl: cmd 4, arg 2580... > >> <337.119631> main: modemap_ioctl: cmd 7, arg 30... > >> <337.119659> main: modemap_start... > >> <397.120149> slusb0: modem_tty_write: hangup... > >> <397.120228> slusb0: modem_hup... > >> <397.120254> slusb0: modem set state: 2 --> 9... > >> <397.120282> slusb0: new state: DP_DISC > >> <397.125202> slusb0: modem_stop.. > >> <397.125292> main: modemap_stop... > >> <397.136906> slusb0: modem set hook: 1 --> 0... > >> <397.137118> main: modemap_ioctl: cmd 2, arg 0... > >> <397.138849> main: modemap_ioctl: cmd 8, arg 0... > >> <397.139020> slusb0: modem set state: 9 --> 1... > >> <397.139046> slusb0: new state: MODEM_IDLE > >> <397.139073> slusb0: modem report result: 3 (NO CARRIER) > >> <397.146899> slusb0: run cmd: ATDT************ > >> <397.147994> slusb0: modem dial: T************ > >> > >> > >> etc.etc. REPEATED attempts to dial until CTRL-C > >> > >> > > > > >
