which modem?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,
> 
>     I'm a little unclear as to how to interpret this output (see
> attached ModemData.txt).  Is it telling me that I've got an "Intel
> Corporation 82801H" modem?
> 
> Thanks
 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.22-14-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Your contry's local Linux experts
 can be found through: http://www.linux.org/groups/index.html. 
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  
Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007
 scanModem update of:  2008_01_22


 There are no blacklisted modem drivers in /etc/modprobe*  files 

The Advanced Linux Sound Architecture (ALSA) packages providing audio support, 
also includes drivers for some modems. The ALSA diagnostics are written during 
bootup to /proc/asound/ folders.

 The /proc/asound/ audio+modem diagostics are being copied.
 Finished copy to Modem/ALSAroot.tgz

The ALSA verion is 1.0.14
The modem cards detected by "aplay -l"  are:


The /proc/asound/pcm file reports:
-----------------------
00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xd8524000 irq 17

USB modem not detected by lsusb

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:284b	103c:30c1	Audio device: Intel Corporation 82801H 

 Modem interrupt assignment and sharing: 
 17:     246431       4842   IO-APIC-fasteoi   uhci_hcd:usb2, HDA Intel, ndiswrapper
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[   21.508000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
[   21.508000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[  507.228000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[  507.732000] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
[  507.732000] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10)
[  507.732000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[  507.732000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
[  507.732000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[  572.624000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[  573.116000] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
[  573.116000] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10)
[  573.116000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[  573.116000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
[  573.116000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 2315.372000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 2315.860000] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
[ 2315.860000] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10)
[ 2315.860000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 2315.860000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 2315.860000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 7498.580000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 7498.956000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
[ 7498.956000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 7498.956000] PCI: Setting latency timer of device 0000:00:1b.0 to 64

 The PCI slot 00:1b.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 


 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===



 For candidate modem in PCI bus:  00:1b.0
   Class 0403: 8086:284b Audio device: Intel Corporation 82801H
      Primary PCI_id  8086:284b
    Subsystem PCI_id  103c:30c1 
    Softmodem codec or chipset from diagnostics: 
                               from    Archives: 
                        

 Lacking a dsp (digital signal processing) chip, the modem is a software 
 intensive or "softmodem" type. Its primary controller manages the traffic 
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:	

Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd.  Read Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.1.tar.gz from:  
	http://linmodems.technion.ac.il/packages/smartlink/

----------------end Softmodem section --------------

Writing Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read Conexant.txt

 Read Conexant.txt

Writing Conexant.txt

Writing Smartlink.txt
============ end Smartlink section =====================


 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.3
             and the compiler used in kernel assembly: 4.1.3


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   linuc_headers base folder /lib/modules/2.6.22-14-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu,  linux-libc-dev). The also required headers of package libc6 are commonly installed by default. 



If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed package
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 269256 2007-10-04 15:57 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/YourSystem.txt concerning other COMM channels: eth0 wlan0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux