Antonio, In 00-06: Si3054 Modem : Si3054 Modem : playback 1 : specifies usage of hw:0,6 00-01: Si3054 Modem : Si3054 Modem : playback 1 : would specify usage of hw:0,1 Babar Correct to SLMODEMD_DEVICE="hw:0,6 Do: grep -rs 11c1 /proc/asound/* Send us the ouput Send me the Modem/ALSAroot.tgz file. If the 0x11c11040 chip is seen therein, there is no current Linux support. On hope, see my earlier message. MarvS On Jan 22, 2008 4:16 PM, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: > 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 > SLMODEMD_DEVICE="hw:0" > should it not be > SLMODEMD_DEVICE="hw:1" > > unless it is the infamos 11x > which is unsupported. > scanModem output is incomplete. > > which SLMODEMD version do you have? > > Regards, > > Antonio > > > > On 1/22/08, Babar Haq <babarhaq@xxxxxxxxx> wrote: > > Hi all > > > > I am running ubuntu 7.10 and I believe I have an intel ich7 modem. > > I am attaching ModemData.txt along this.I only downloaded > > sl-modem-daemon and set this in /etc/default/sl-modem-daemon > > > > SLMODEMD_DEVICE="hw:0" > > SLMODEMD_COUNTRY=SAUDIARABIA > > > > The modem seems to be working fine (can query the modem using kppp) > > until I try to dial out. KPPP,efax and even wvdial repeatedly gives > > me "No Carrier" problem. One important thing is that I need to dial > > *9 to access outside line. > > > > Here is my wvdial.conf > > > > [Dialer Defaults] > > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > Carrier Check = no > > Stupid Mode = 1 > > #Modem Type = Analog Modem > > Phone = *9,3660123 > > #ISDN = 0 > > Username = test > > Init1 = ATZ > > Password = test > > Modem = /dev/ttySL0 > > Baud = 460800 > > > > > > Hope some one can help. > > > > Regards, > > Babar Haq > > > > > > -- > > Want an e-mail address like mine? > > Get a free e-mail account today at www.mail.com! > > > > > > >
