Perhaps. I suggest other alternative. Open your computer and try change your modem to other slot. ---------- Cabeçalho inicial ----------- De: "Bart Verbeek" ahverbeek@xxxxxxxxx Para: discuss@xxxxxxxxxxxxx Cópia: Data: Mon, 21 Jan 2008 15:40:57 +0000 Assunto: Re: reply: Agere modem doesn't work] > Hello, > I have booted with the acpi=off option and I have disabled bios sound. > Modules are loaded (agrmodem and agrserial). > - sudo ln -s /dev/ttyAGS3 /dev/ttySAGR > - sudo ln -s /dev/ttyAGS3 /dev/modem > - sudo wvdialconf /etc/wvdial.conf > > This gave me the following output: > > baso@vast:~$ sudo wvdialconf /etc/wvdial.conf > > Editing `/etc/wvdial.conf'. > > > > Scanning your serial ports for a modem. > > >Modem Port Scan<*1>: S0 > >ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > >ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud > >ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > >Modem Port Scan<*1>: S2 S3 > >ttySAGR<*1>: ATQ0 V1 E1 -- OK > >ttySAGR<*1>: ATQ0 V1 E1 Z -- OK > >ttySAGR<*1>: ATQ0 V1 E1 S0=0 -- OK > >ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK > >ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK > >ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > >ttySAGR<*1>: Modem Identifier: ATI -- Agere SoftModem Version 2.1.40 > >ttySAGR<*1>: Speed 4800: AT -- OK > >ttySAGR<*1>: Speed 9600: AT -- OK > >ttySAGR<*1>: Speed 19200: AT -- OK > >ttySAGR<*1>: Speed 38400: AT -- OK > >ttySAGR<*1>: Speed 57600: AT -- OK > >ttySAGR<*1>: Speed 115200: AT -- OK > >ttySAGR<*1>: Max speed is 115200; that should be safe. > >ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > > > >Found a modem on /dev/ttySAGR. > >Modem configuration written to /etc/wvdial.conf. > >ttySAGR<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > > So it looks as if the modem is finally detected. > But is there no way to get it working with sound and acpi on? > Bart > > > > Marvin Stodolsky schreef: > > Bart, > > > > Please Subscribe as a List member through www.linmodems.org, or each > > of your emails has to be manually approved. You can always > > Unsubscribe later from the same site. > > > > Sound can be worked on if/after we get the modem working. > > Sound or modem can always be restarted manually during a single session. > > > > Send emails to the List, no to me directly. > > > > MarvS > > > > On Jan 21, 2008 8:34 AM, Bart Verbeek <ahverbeek@xxxxxxxxx> wrote: > >> Hi Hugo, > >> Disabling sound would that be a temporary test? Because I don't want to > >> miss sound of course? > >> Bart > >> > >> > >> hugocanalli schreef: > >> > >> > Try disable your sound in the BIOS. Restart your computer and > press DEL. > >> > > >> > ---------- Cabeçalho inicial ----------- > >> > > >> > De: "Bart Verbeek" ahverbeek@xxxxxxxxx > >> > Para: discuss@xxxxxxxxxxxxx > >> > Cópia: > >> > Data: Mon, 21 Jan 2008 10:13:21 +0000 > >> > Assunto: Re: reply: Agere modem doesn't work] > >> > > >> > > >> >> Thanx a lot Marvin and Hugo for your help, > >> >> I tried first the ln to ttySagr. This brought me a little bit > further. > >> >> Because wvdialconf does see ttySagr, but without result: > >> >> > >> >> #baso@vast:~$ sudo wvdialconf /etc/wvdial.conf > >> >> #Editing `/etc/wvdial.conf'. > >> >> # > >> >> #Scanning your serial ports for a modem. > >> >> # > >> >> #Modem Port Scan<*1>: S0 > >> >> #ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > >> >> #ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: > 115200 baud > >> >> #ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > >> >> #Modem Port Scan<*1>: S2 S3 > >> >> #ttySagr<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: > 9600 baud > >> >> #ttySagr<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: > 115200 baud > >> >> #ttySagr<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > >> >> # > >> >> #Sorry, no modem was detected! Is it in use by another program? > >> >> > >> >> When I edit menu.lst like Hugo told me to do, I get a lot of errors > >> >> > >> > with > >> > > >> >> my usb mouse en keyboard and grafics (nvidia). But > >> >> wvdialconf actually gives me a result detecting the Agere modem. > When I > >> >> tried to use it for dialing, my system hangs totally! I could > not even > >> >> 'Sysrq'. But maybe that is because of the usb keyboard. > >> >> > >> >> Is there another way doing this? I included ModemData.txt > >> >> Bart > >> >> > >> >> > >> >> > -------- Originele bericht -------- > >> >> > Onderwerp: Re: Agere modem doesn't work > >> >> > Datum: Sun, 20 Jan 2008 23:17:34 -0200 > >> >> > Van: Hugo Leonardo Canalli <hugocanalli@xxxxxxxxxxxxxxxxxx> > >> >> > Aan: Bart Verbeek <ahverbeek@xxxxxxxxx> > >> >> > CC: discuss@xxxxxxxxxxxxx, it.drafter@xxxxxxxxx, Jacques > >> >> > >> > Goldberg > >> > > >> >> <Jacques.Goldberg@xxxxxxx> > >> >> > Referenties: <4793CBB0.2050308@xxxxxxxxx> > >> >> <c27106ee0801201556x602e8bb4i46d140a8a12f7aea@xxxxxxxxxxxxxx> > >> >> > > >> >> > To ubuntu Gutsy try: > >> >> > Type sudo gedit /boot/grub/menu.lst and put the boot parameter > >> >> > >> > acpi=off: > >> > > >> >> > By example: kernel ... ro quiet splash acpi=off > >> >> > Restart your system. > >> >> > > >> >> > Now type: > >> >> > sudo modprobe agrserial > >> >> > sudo ln -s /dev/ttyAGS3 /dev/ttySAGR > >> >> > sudo ln -s /dev/ttyAGS3 /dev/modem > >> >> > sudo wvdailconf /etc/wvdial.conf > >> >> > > >> >> > ------- Originele bericht -------- > >> >> > Onderwerp: Re: Agere modem doesn't work > >> >> > Datum: Sun, 20 Jan 2008 18:56:03 -0500 > >> >> > Van: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> > >> >> > Aan: Bart Verbeek <ahverbeek@xxxxxxxxx> > >> >> > CC: discuss@xxxxxxxxxxxxx > >> >> > Referenties: <4793CBB0.2050308@xxxxxxxxx> > >> >> > > >> >> > Bart, > >> >> > Please return the entire ModemData.txt when you report back. > >> >> > It has details which may be importart to functionality of your > >> >> > 11c1:0620 Communication controller: Agere Systems > >> >> > which is one of the more difficult types under Linux. > >> >> > > >> >> > /dev/ttyAGS3 is dynanically created upon driver insertion. > >> >> > For testing additionally create a symbolic link: > >> >> > # ln -s /dev/ttyAGS3 /dev/ttySagr > >> >> > or under Ubuntu > >> >> > $ sudo ln -s /dev/ttyAGS3 /dev/ttySagr > >> >> > which will be followed during the first functionality test > >> >> > > >> >> > $ wvdailconf /etc/wvdial.conf > >> >> > > >> >> > Verify an ordinary dialout first before proceeding with FAX > tests, > >> >> > with which this list does not have expertise. > >> >> > > >> >> > MarvS > >> >> > > >> >> > -------- Originele bericht -------- > >> >> > Onderwerp: Agere modem doesn't work > >> >> > Datum: Sun, 20 Jan 2008 22:31:12 +0000 > >> >> > Van: Bart Verbeek <ahverbeek@xxxxxxxxx> > >> >> > Aan: discuss@xxxxxxxxxxxxx > >> >> > > >> >> > Hello, > >> >> > Ik tried the agere modem modules generated with the packages at: > >> >> > http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/ > >> >> > > >> >> > This one gives me actually some modules: > >> >> > agrsm-20070804.tar.gz > >> >> > - agrmodem.ko and agrserial.ko > >> >> > > >> >> > I'm able to load these modules and if loaded I find a new entry > >> >> > >> > in dev: > >> > > >> >> > /dev/ttyAGS3 > >> >> > /dev/modem is not generated. Should it be there? > >> >> > > >> >> > The problem is that my fax application (eFax-gtk) is able to > >> >> > >> > 'open' the > >> > > >> >> > modem port /dev/ttyAGS3 but the modem is not responding. > >> >> > Is there a solution or is it just not working for my system? > >> >> > > >> >> > I have Ubuntu Gutsy, kernel 2.6.22-11-generic installed. > >> >> > I'm looking forward to your reaction. > >> >> > Kind regards, > >> >> > Bart Verbeek > >> >> > > >> >> > > >> >> > Bart > >> >> > For 11c1:0620 Communication controller: Agere Systems > >> >> > Try > >> >> > AGRSM - At > >> >> > >> > http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/ > >> > > >> >> > Read Agrsm.txt > >> >> > Read Agrsm.txt > >> >> > MarvS > >> >> > > >> >> > > >> >> > > >> >> > > >> >> > > >> >> > > >> >> > > >> >> > -- > >> >> > > > >
