Hello,
I have booted with the acpi=off option and I have disabled bios sound.
Modules are loaded (agrmodem and agrserial).
- sudo ln -s /dev/ttyAGS3 /dev/ttySAGR
- sudo ln -s /dev/ttyAGS3 /dev/modem
- sudo wvdialconf /etc/wvdial.conf
This gave me the following output:
> baso@vast:~$ sudo wvdialconf /etc/wvdial.conf
> Editing `/etc/wvdial.conf'.
>
> Scanning your serial ports for a modem.
>Modem Port Scan<*1>: S0
>ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
>ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
>ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>Modem Port Scan<*1>: S2 S3
>ttySAGR<*1>: ATQ0 V1 E1 -- OK
>ttySAGR<*1>: ATQ0 V1 E1 Z -- OK
>ttySAGR<*1>: ATQ0 V1 E1 S0=0 -- OK
>ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
>ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
>ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>ttySAGR<*1>: Modem Identifier: ATI -- Agere SoftModem Version 2.1.40
>ttySAGR<*1>: Speed 4800: AT -- OK
>ttySAGR<*1>: Speed 9600: AT -- OK
>ttySAGR<*1>: Speed 19200: AT -- OK
>ttySAGR<*1>: Speed 38400: AT -- OK
>ttySAGR<*1>: Speed 57600: AT -- OK
>ttySAGR<*1>: Speed 115200: AT -- OK
>ttySAGR<*1>: Max speed is 115200; that should be safe.
>ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>
>Found a modem on /dev/ttySAGR.
>Modem configuration written to /etc/wvdial.conf.
>ttySAGR<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
So it looks as if the modem is finally detected.
But is there no way to get it working with sound and acpi on?
Bart
Marvin Stodolsky schreef:
> Bart,
>
> Please Subscribe as a List member through www.linmodems.org, or each
> of your emails has to be manually approved. You can always
> Unsubscribe later from the same site.
>
> Sound can be worked on if/after we get the modem working.
> Sound or modem can always be restarted manually during a single session.
>
> Send emails to the List, no to me directly.
>
> MarvS
>
> On Jan 21, 2008 8:34 AM, Bart Verbeek <ahverbeek@xxxxxxxxx> wrote:
>> Hi Hugo,
>> Disabling sound would that be a temporary test? Because I don't want to
>> miss sound of course?
>> Bart
>>
>>
>> hugocanalli schreef:
>>
>> > Try disable your sound in the BIOS. Restart your computer and
press DEL.
>> >
>> > ---------- Cabeçalho inicial -----------
>> >
>> > De: "Bart Verbeek" ahverbeek@xxxxxxxxx
>> > Para: discuss@xxxxxxxxxxxxx
>> > Cópia:
>> > Data: Mon, 21 Jan 2008 10:13:21 +0000
>> > Assunto: Re: reply: Agere modem doesn't work]
>> >
>> >
>> >> Thanx a lot Marvin and Hugo for your help,
>> >> I tried first the ln to ttySagr. This brought me a little bit
further.
>> >> Because wvdialconf does see ttySagr, but without result:
>> >>
>> >> #baso@vast:~$ sudo wvdialconf /etc/wvdial.conf
>> >> #Editing `/etc/wvdial.conf'.
>> >> #
>> >> #Scanning your serial ports for a modem.
>> >> #
>> >> #Modem Port Scan<*1>: S0
>> >> #ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
>> >> #ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try:
115200 baud
>> >> #ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>> >> #Modem Port Scan<*1>: S2 S3
>> >> #ttySagr<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try:
9600 baud
>> >> #ttySagr<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try:
115200 baud
>> >> #ttySagr<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>> >> #
>> >> #Sorry, no modem was detected! Is it in use by another program?
>> >>
>> >> When I edit menu.lst like Hugo told me to do, I get a lot of errors
>> >>
>> > with
>> >
>> >> my usb mouse en keyboard and grafics (nvidia). But
>> >> wvdialconf actually gives me a result detecting the Agere modem.
When I
>> >> tried to use it for dialing, my system hangs totally! I could
not even
>> >> 'Sysrq'. But maybe that is because of the usb keyboard.
>> >>
>> >> Is there another way doing this? I included ModemData.txt
>> >> Bart
>> >>
>> >>
>> >> > -------- Originele bericht --------
>> >> > Onderwerp: Re: Agere modem doesn't work
>> >> > Datum: Sun, 20 Jan 2008 23:17:34 -0200
>> >> > Van: Hugo Leonardo Canalli <hugocanalli@xxxxxxxxxxxxxxxxxx>
>> >> > Aan: Bart Verbeek <ahverbeek@xxxxxxxxx>
>> >> > CC: discuss@xxxxxxxxxxxxx, it.drafter@xxxxxxxxx, Jacques
>> >>
>> > Goldberg
>> >
>> >> <Jacques.Goldberg@xxxxxxx>
>> >> > Referenties: <4793CBB0.2050308@xxxxxxxxx>
>> >> <c27106ee0801201556x602e8bb4i46d140a8a12f7aea@xxxxxxxxxxxxxx>
>> >> >
>> >> > To ubuntu Gutsy try:
>> >> > Type sudo gedit /boot/grub/menu.lst and put the boot parameter
>> >>
>> > acpi=off:
>> >
>> >> > By example: kernel ... ro quiet splash acpi=off
>> >> > Restart your system.
>> >> >
>> >> > Now type:
>> >> > sudo modprobe agrserial
>> >> > sudo ln -s /dev/ttyAGS3 /dev/ttySAGR
>> >> > sudo ln -s /dev/ttyAGS3 /dev/modem
>> >> > sudo wvdailconf /etc/wvdial.conf
>> >> >
>> >> > ------- Originele bericht --------
>> >> > Onderwerp: Re: Agere modem doesn't work
>> >> > Datum: Sun, 20 Jan 2008 18:56:03 -0500
>> >> > Van: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
>> >> > Aan: Bart Verbeek <ahverbeek@xxxxxxxxx>
>> >> > CC: discuss@xxxxxxxxxxxxx
>> >> > Referenties: <4793CBB0.2050308@xxxxxxxxx>
>> >> >
>> >> > Bart,
>> >> > Please return the entire ModemData.txt when you report back.
>> >> > It has details which may be importart to functionality of your
>> >> > 11c1:0620 Communication controller: Agere Systems
>> >> > which is one of the more difficult types under Linux.
>> >> >
>> >> > /dev/ttyAGS3 is dynanically created upon driver insertion.
>> >> > For testing additionally create a symbolic link:
>> >> > # ln -s /dev/ttyAGS3 /dev/ttySagr
>> >> > or under Ubuntu
>> >> > $ sudo ln -s /dev/ttyAGS3 /dev/ttySagr
>> >> > which will be followed during the first functionality test
>> >> >
>> >> > $ wvdailconf /etc/wvdial.conf
>> >> >
>> >> > Verify an ordinary dialout first before proceeding with FAX
tests,
>> >> > with which this list does not have expertise.
>> >> >
>> >> > MarvS
>> >> >
>> >> > -------- Originele bericht --------
>> >> > Onderwerp: Agere modem doesn't work
>> >> > Datum: Sun, 20 Jan 2008 22:31:12 +0000
>> >> > Van: Bart Verbeek <ahverbeek@xxxxxxxxx>
>> >> > Aan: discuss@xxxxxxxxxxxxx
>> >> >
>> >> > Hello,
>> >> > Ik tried the agere modem modules generated with the packages at:
>> >> > http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/
>> >> >
>> >> > This one gives me actually some modules:
>> >> > agrsm-20070804.tar.gz
>> >> > - agrmodem.ko and agrserial.ko
>> >> >
>> >> > I'm able to load these modules and if loaded I find a new entry
>> >>
>> > in dev:
>> >
>> >> > /dev/ttyAGS3
>> >> > /dev/modem is not generated. Should it be there?
>> >> >
>> >> > The problem is that my fax application (eFax-gtk) is able to
>> >>
>> > 'open' the
>> >
>> >> > modem port /dev/ttyAGS3 but the modem is not responding.
>> >> > Is there a solution or is it just not working for my system?
>> >> >
>> >> > I have Ubuntu Gutsy, kernel 2.6.22-11-generic installed.
>> >> > I'm looking forward to your reaction.
>> >> > Kind regards,
>> >> > Bart Verbeek
>> >> >
>> >> >
>> >> > Bart
>> >> > For 11c1:0620 Communication controller: Agere Systems
>> >> > Try
>> >> > AGRSM - At
>> >>
>> > http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/
>> >
>> >> > Read Agrsm.txt
>> >> > Read Agrsm.txt
>> >> > MarvS
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> >
