Hello,
I just tried the pci card swap to the other slot. With that I ended up
without ethernet connection. Eth0 wasn't present at all.
I looks like the isa irq problems I had 13 years ago. But pci should not
have problems with that. Isn't it?
Bart
hugocanalli schreef:
> Perhaps.
> I suggest other alternative.
> Open your computer and try change your modem to other slot.
>
>
> ---------- Cabeçalho inicial -----------
>
> De: "Bart Verbeek" ahverbeek@xxxxxxxxx
> Para: discuss@xxxxxxxxxxxxx
> Cópia:
> Data: Mon, 21 Jan 2008 15:40:57 +0000
> Assunto: Re: reply: Agere modem doesn't work]
>
>> Hello,
>> I have booted with the acpi=off option and I have disabled bios sound.
>> Modules are loaded (agrmodem and agrserial).
>> - sudo ln -s /dev/ttyAGS3 /dev/ttySAGR
>> - sudo ln -s /dev/ttyAGS3 /dev/modem
>> - sudo wvdialconf /etc/wvdial.conf
>>
>> This gave me the following output:
>> > baso@vast:~$ sudo wvdialconf /etc/wvdial.conf
>> > Editing `/etc/wvdial.conf'.
>> >
>> > Scanning your serial ports for a modem.
>>
>> >Modem Port Scan<*1>: S0
>> >ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
>> >ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
>> >ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>> >Modem Port Scan<*1>: S2 S3
>> >ttySAGR<*1>: ATQ0 V1 E1 -- OK
>> >ttySAGR<*1>: ATQ0 V1 E1 Z -- OK
>> >ttySAGR<*1>: ATQ0 V1 E1 S0=0 -- OK
>> >ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
>> >ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
>> >ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>> >ttySAGR<*1>: Modem Identifier: ATI -- Agere SoftModem Version 2.1.40
>> >ttySAGR<*1>: Speed 4800: AT -- OK
>> >ttySAGR<*1>: Speed 9600: AT -- OK
>> >ttySAGR<*1>: Speed 19200: AT -- OK
>> >ttySAGR<*1>: Speed 38400: AT -- OK
>> >ttySAGR<*1>: Speed 57600: AT -- OK
>> >ttySAGR<*1>: Speed 115200: AT -- OK
>> >ttySAGR<*1>: Max speed is 115200; that should be safe.
>> >ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>> >
>> >Found a modem on /dev/ttySAGR.
>> >Modem configuration written to /etc/wvdial.conf.
>> >ttySAGR<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
>>
>> So it looks as if the modem is finally detected.
>> But is there no way to get it working with sound and acpi on?
>> Bart
>>
>>
>>
>> Marvin Stodolsky schreef:
>> > Bart,
>> >
>> > Please Subscribe as a List member through www.linmodems.org, or each
>> > of your emails has to be manually approved. You can always
>> > Unsubscribe later from the same site.
>> >
>> > Sound can be worked on if/after we get the modem working.
>> > Sound or modem can always be restarted manually during a single
> session.
>> >
>> > Send emails to the List, no to me directly.
>> >
>> > MarvS
>> >
>> > On Jan 21, 2008 8:34 AM, Bart Verbeek <ahverbeek@xxxxxxxxx> wrote:
>> >> Hi Hugo,
>> >> Disabling sound would that be a temporary test? Because I don't
> want to
>> >> miss sound of course?
>> >> Bart
>> >>
>> >>
>> >> hugocanalli schreef:
>> >>
>> >> > Try disable your sound in the BIOS. Restart your computer and
>> press DEL.
>> >> >
>> >> > ---------- Cabeçalho inicial -----------
>> >> >
>> >> > De: "Bart Verbeek" ahverbeek@xxxxxxxxx
>> >> > Para: discuss@xxxxxxxxxxxxx
>> >> > Cópia:
>> >> > Data: Mon, 21 Jan 2008 10:13:21 +0000
>> >> > Assunto: Re: reply: Agere modem doesn't work]
>> >> >
>> >> >
>> >> >> Thanx a lot Marvin and Hugo for your help,
>> >> >> I tried first the ln to ttySagr. This brought me a little bit
>> further.
>> >> >> Because wvdialconf does see ttySagr, but without result:
>> >> >>
>> >> >> #baso@vast:~$ sudo wvdialconf /etc/wvdial.conf
>> >> >> #Editing `/etc/wvdial.conf'.
>> >> >> #
>> >> >> #Scanning your serial ports for a modem.
>> >> >> #
>> >> >> #Modem Port Scan<*1>: S0
>> >> >> #ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try:
> 9600 baud
>> >> >> #ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try:
>> 115200 baud
>> >> >> #ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>> >> >> #Modem Port Scan<*1>: S2 S3
>> >> >> #ttySagr<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try:
>> 9600 baud
>> >> >> #ttySagr<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try:
>> 115200 baud
>> >> >> #ttySagr<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>> >> >> #
>> >> >> #Sorry, no modem was detected! Is it in use by another program?
>> >> >>
>> >> >> When I edit menu.lst like Hugo told me to do, I get a lot of
> errors
>> >> >>
>> >> > with
>> >> >
>> >> >> my usb mouse en keyboard and grafics (nvidia). But
>> >> >> wvdialconf actually gives me a result detecting the Agere
> modem.
>> When I
>> >> >> tried to use it for dialing, my system hangs totally! I could
>> not even
>> >> >> 'Sysrq'. But maybe that is because of the usb keyboard.
>> >> >>
>> >> >> Is there another way doing this? I included ModemData.txt
>> >> >> Bart
>> >> >>
>> >> >>
>> >> >> > -------- Originele bericht --------
>> >> >> > Onderwerp: Re: Agere modem doesn't work
>> >> >> > Datum: Sun, 20 Jan 2008 23:17:34 -0200
>> >> >> > Van: Hugo Leonardo Canalli
> <hugocanalli@xxxxxxxxxxxxxxxxxx>
>> >> >> > Aan: Bart Verbeek <ahverbeek@xxxxxxxxx>
>> >> >> > CC: discuss@xxxxxxxxxxxxx, it.drafter@xxxxxxxxx, Jacques
>> >> >>
>> >> > Goldberg
>> >> >
>> >> >> <Jacques.Goldberg@xxxxxxx>
>> >> >> > Referenties: <4793CBB0.2050308@xxxxxxxxx>
>> >> >> <c27106ee0801201556x602e8bb4i46d140a8a12f7aea@xxxxxxxxxxxxxx>
>> >> >> >
>> >> >> > To ubuntu Gutsy try:
>> >> >> > Type sudo gedit /boot/grub/menu.lst and put the boot
> parameter
>> >> >>
>> >> > acpi=off:
>> >> >
>> >> >> > By example: kernel ... ro quiet splash acpi=off
>> >> >> > Restart your system.
>> >> >> >
>> >> >> > Now type:
>> >> >> > sudo modprobe agrserial
>> >> >> > sudo ln -s /dev/ttyAGS3 /dev/ttySAGR
>> >> >> > sudo ln -s /dev/ttyAGS3 /dev/modem
>> >> >> > sudo wvdailconf /etc/wvdial.conf
>> >> >> >
>> >> >> > ------- Originele bericht --------
>> >> >> > Onderwerp: Re: Agere modem doesn't work
>> >> >> > Datum: Sun, 20 Jan 2008 18:56:03 -0500
>> >> >> > Van: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
>> >> >> > Aan: Bart Verbeek <ahverbeek@xxxxxxxxx>
>> >> >> > CC: discuss@xxxxxxxxxxxxx
>> >> >> > Referenties: <4793CBB0.2050308@xxxxxxxxx>
>> >> >> >
>> >> >> > Bart,
>> >> >> > Please return the entire ModemData.txt when you report back.
>> >> >> > It has details which may be importart to functionality of
> your
>> >> >> > 11c1:0620 Communication controller: Agere Systems
>> >> >> > which is one of the more difficult types under Linux.
>> >> >> >
>> >> >> > /dev/ttyAGS3 is dynanically created upon driver insertion.
>> >> >> > For testing additionally create a symbolic link:
>> >> >> > # ln -s /dev/ttyAGS3 /dev/ttySagr
>> >> >> > or under Ubuntu
>> >> >> > $ sudo ln -s /dev/ttyAGS3 /dev/ttySagr
>> >> >> > which will be followed during the first functionality test
>> >> >> >
>> >> >> > $ wvdailconf /etc/wvdial.conf
>> >> >> >
>> >> >> > Verify an ordinary dialout first before proceeding with FAX
>> tests,
>> >> >> > with which this list does not have expertise.
>> >> >> >
>> >> >> > MarvS
>> >> >> >
>> >> >> > -------- Originele bericht --------
>> >> >> > Onderwerp: Agere modem doesn't work
>> >> >> > Datum: Sun, 20 Jan 2008 22:31:12 +0000
>> >> >> > Van: Bart Verbeek <ahverbeek@xxxxxxxxx>
>> >> >> > Aan: discuss@xxxxxxxxxxxxx
>> >> >> >
>> >> >> > Hello,
>> >> >> > Ik tried the agere modem modules generated with the
> packages at:
>> >> >> > http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/
>> >> >> >
>> >> >> > This one gives me actually some modules:
>> >> >> > agrsm-20070804.tar.gz
>> >> >> > - agrmodem.ko and agrserial.ko
>> >> >> >
>> >> >> > I'm able to load these modules and if loaded I find a new
> entry
>> >> >>
>> >> > in dev:
>> >> >
>> >> >> > /dev/ttyAGS3
>> >> >> > /dev/modem is not generated. Should it be there?
>> >> >> >
>> >> >> > The problem is that my fax application (eFax-gtk) is able to
>> >> >>
>> >> > 'open' the
>> >> >
>> >> >> > modem port /dev/ttyAGS3 but the modem is not responding.
>> >> >> > Is there a solution or is it just not working for my system?
>> >> >> >
>> >> >> > I have Ubuntu Gutsy, kernel 2.6.22-11-generic installed.
>> >> >> > I'm looking forward to your reaction.
>> >> >> > Kind regards,
>> >> >> > Bart Verbeek
>> >> >> >
>> >> >> >
>> >> >> > Bart
>> >> >> > For 11c1:0620 Communication controller: Agere Systems
>> >> >> > Try
>> >> >> > AGRSM - At
>> >> >>
>> >> > http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/
>> >> >
>> >> >> > Read Agrsm.txt
>> >> >> > Read Agrsm.txt
>> >> >> > MarvS
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > --
>> >> >> >
>>
>>
>>
>
>
