I am able to dial out, but whenever a connection is about to be made I always get carrier lost and then the modem tries again. I am using Ubuntu 7.10 btw. What can I do to fix this?
This is my output for:
# setserial -agv /dev/ttyS*
/dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: none
Flags: spd_normal skip_test
/dev/ttyS1, Line 1, UART: 16550A, Port: 0x02f8, IRQ: 3
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: none
Flags: spd_normal skip_test
/dev/ttyS2, Line 2, UART: unknown, Port: 0x03e8, IRQ: 4
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test
/dev/ttyS3, Line 3, UART: unknown, Port: 0x02e8, IRQ: 3
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal
/dev/ttySHSF0, Line 0, UART: undefined, Port: 0xdfe0, IRQ: 20
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: none
Flags: spd_normal
/dev/ttySHSF1, Line 1, UART: unknown, Port: 0x0000, IRQ: 0
Baud_base: 0, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal
/dev/ttySHSF2, Line 2, UART: unknown, Port: 0x0000, IRQ: 0
Baud_base: 0, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal
/dev/ttySHSF3, Line 3, UART: unknown, Port: 0x0000, IRQ: 0
Baud_base: 0, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal
/dev/ttySHSF4, Line 4, UART: unknown, Port: 0x0000, IRQ: 0
Baud_base: 0, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal
/dev/ttySHSF5, Line 5, UART: unknown, Port: 0x0000, IRQ: 0
Baud_base: 0, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal
/dev/ttySHSF6, Line 6, UART: unknown, Port: 0x0000, IRQ: 0
Baud_base: 0, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal
/dev/ttySHSF7, Line 7, UART: unknown, Port: 0x0000, IRQ: 0
Baud_base: 0, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal
