bh82 We deed details of your System. From http://linmodems.technion.ac.il, download scanModem.gz Return the ModemData.txt output from ./scanModem. You are presumable using the hsfmodem software. Did you get in from Linuxant of Dell. The Dell variant is not yet competent beyond 2.6.18 kernels yet. MarvS On Jan 3, 2008 2:37 PM, <blackhole82@xxxxxxxxxxxxxx> wrote: > I am able to dial out, but whenever a connection is about to be made I always get carrier lost and then the modem tries again. I am using Ubuntu 7.10 btw. What can I do to fix this? > > This is my output for: > # setserial -agv /dev/ttyS* > > /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 > Baud_base: 115200, close_delay: 50, divisor: 0 > closing_wait: none > Flags: spd_normal skip_test > > /dev/ttyS1, Line 1, UART: 16550A, Port: 0x02f8, IRQ: 3 > Baud_base: 115200, close_delay: 50, divisor: 0 > closing_wait: none > Flags: spd_normal skip_test > > /dev/ttyS2, Line 2, UART: unknown, Port: 0x03e8, IRQ: 4 > Baud_base: 115200, close_delay: 50, divisor: 0 > closing_wait: 3000 > Flags: spd_normal skip_test > > /dev/ttyS3, Line 3, UART: unknown, Port: 0x02e8, IRQ: 3 > Baud_base: 115200, close_delay: 50, divisor: 0 > closing_wait: 3000 > Flags: spd_normal > > /dev/ttySHSF0, Line 0, UART: undefined, Port: 0xdfe0, IRQ: 20 > Baud_base: 115200, close_delay: 50, divisor: 0 > closing_wait: none > Flags: spd_normal > > /dev/ttySHSF1, Line 1, UART: unknown, Port: 0x0000, IRQ: 0 > Baud_base: 0, close_delay: 50, divisor: 0 > closing_wait: 3000 > Flags: spd_normal > > /dev/ttySHSF2, Line 2, UART: unknown, Port: 0x0000, IRQ: 0 > Baud_base: 0, close_delay: 50, divisor: 0 > closing_wait: 3000 > Flags: spd_normal > > /dev/ttySHSF3, Line 3, UART: unknown, Port: 0x0000, IRQ: 0 > Baud_base: 0, close_delay: 50, divisor: 0 > closing_wait: 3000 > Flags: spd_normal > > /dev/ttySHSF4, Line 4, UART: unknown, Port: 0x0000, IRQ: 0 > Baud_base: 0, close_delay: 50, divisor: 0 > closing_wait: 3000 > Flags: spd_normal > > /dev/ttySHSF5, Line 5, UART: unknown, Port: 0x0000, IRQ: 0 > Baud_base: 0, close_delay: 50, divisor: 0 > closing_wait: 3000 > Flags: spd_normal > > /dev/ttySHSF6, Line 6, UART: unknown, Port: 0x0000, IRQ: 0 > Baud_base: 0, close_delay: 50, divisor: 0 > closing_wait: 3000 > Flags: spd_normal > > /dev/ttySHSF7, Line 7, UART: unknown, Port: 0x0000, IRQ: 0 > Baud_base: 0, close_delay: 50, divisor: 0 > closing_wait: 3000 > Flags: spd_normal > > > >
