Codec: Generic 11c1 Si3054 Address: 1 Vendor Id: 0x11c11040 Subsystem Id: 0x11c10001 Revision Id: 0x100200 Modem Function Group: 0x1 The audio card hosts a softmodem chip with Vendor ID: 0x11c11040 The softmodem chip 0x11c11040 is NOT YET supported under Linux. Code must be developed by manufacture LSI Inc. See details in http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00915.html See Info General.txt about alternatives Condolences MarvS On Nov 22, 2007 1:29 PM, Peter Skensved <peter@xxxxxxxxxxxxxxxxxx> wrote: > On Thu, Nov 22, 2007 at 01:32:04AM -0500, Marvin Stodolsky wrote: > > Peter, > > > > The entire ModemData.txt output from scanModem is needed, please. > > Si3054 is a base on which further processing to diverse modem chips is done, > > Some supported and some not. > > > > Note that to compile an ALSA competent slmodemd, there must first be > > installed a package libasound2-dev > > The compile must be done within the modem/ subfolder with commands > > make clean > > make SUPPORT_ALSA=1 > > > > MarvS > > > ok here it is : > > > -------------------------- System information ---------------------------- > CPU=i686, CentOS release 5 (Final) > Kernel > Linux version 2.6.18-8.1.14.el5 (mockbuild@xxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Thu Sep 27 18:58:54 EDT 2007 > scanModem update of: 20071109 > > > There are no blacklisted modem drivers in /etc/modprobe* files > ---ALSA bootup diagnostics --- > > The Advanced Linux Sound Architecture (ALSA) packages providing audio support on your System, > also includes drivers for some modems. High Definition Audio (HDA) cards can themselves host > a softmodem chipset, with both audio+modem supported by a snd-hda-intel driver. > The ALSA diagnostics are written during bootup to /proc/asound/ folders. > > > The modem codec file for the the HDA card is: /proc/asound/card0/codec#1 > -------------------------------------------------------- > Codec: Generic 11c1 Si3054 > Address: 1 > Vendor Id: 0x11c11040 > Subsystem Id: 0x11c10001 > Revision Id: 0x100200 > Modem Function Group: 0x1 > > The audio card hosts a softmodem chip with Vendor ID: 0x11c11040 > > The softmodem chip 0x11c11040 is not yet supported under Linux. > Code must be developed by manufacture LSI Inc. > See details in http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00915.html > Read InfoGeneral.txt about alternatives modem hardware. > Summary card and chipset information is in: > /proc/asound/cards: > 0 [Intel ]: HDA-Intel - HDA Intel > HDA Intel at 0xb0000000 irq 50 > > /proc/asound/pcm: > 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 > 00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1 > > A copy of /proc/asound had been copied to Modem/ALSAroot.tgz > PCI slot 00:1b.0 has a High Definition Audio Card > USB modem not detected by lsusb > > For candidate card, firmware information and bootup diagnostics are: > > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1b.0 8086:27d8 17aa:2066 Audio device: Intel Corporation 82801G > > Modem interrupt assignment and sharing: > 50: 84017 82962 IO-APIC-level HDA Intel > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000) > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > > The PCI slot 00:1b.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read Bootup.txt about possible fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > === Finished modem firmware and bootup diagnostics section. === > === Next deducing cogent software === > > The High Defintion Audio card with PCI ID 8086:27d8 may host a soft modem chip. > > There is candidate modem software. > > For candidate modem in PCI bus: 00:1b.0 > Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G > Primary PCI_id 8086:27d8 > Subsystem PCI_id 17aa:2066 > Softmodem codec or chipset from diagnostics: > from Archives: > > > Lacking a dsp (digital signal processing) chip, the modem is a software > intensive or "softmodem" type. Its primary controller manages the traffic > with the CPU. But the software needed is specified in the Subsystem. > ----------------------------------------- > Support type needed or chipset: Agere_11c11040_chip_is_not_supported > > > Writing Intel.txt > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.1.1 > and the compiler used in kernel assembly: 4.1.1 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.1 > linuc_headers base folder /lib/modules/2.6.18-8.1.14.el5/build > > However some compilations and executable functions may need additional files, > in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ . > For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default. > > > > If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed pacakage > For Debian/Ubuntu related distributions, run the following command to display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -r-xr-xr-x 1 root root 312236 Mar 14 2007 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > lock > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for the experts > should trouble shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > /etc/udev/rules.d/50-udev.rules:KERNEL=="modems/mwave*", NAME="%k", GROUP="uucp", MODE="0660" > Within /etc/modprobe.conf files: > > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > >
