Hello, on 11/19/2007 07:16 PM Antonio Olivares said the following: > --- Manuel Lemos <mlemos@xxxxxxx> wrote: > >> Hello, >> >> There is no SLMODEMD.gcc4.2.tar.gz package there. I >> downloaded, compiled >> and installed slmodem-2.9.11-20070813 package, did >> modprobe slamr, but >> it still does not work. It shows the error: >> >> error: mdm setup: cannot open dev `/dev/slamr0': No >> such device >> error: cannot setup device `/dev/slamr0' >> >> What can I do now? > > You can compile slmodem-2.9.11-20070813 with ALSA > support > from within slmodem-2.9.11-20070813 directory > $ cd modem > $ make SUPPORT_ALSA=1 Ok, I did that and started the "modem" with: /usr/sbin/slmodemd --alsa hw:0 It showed this message symbolic link `/dev/ttySL0' -> `/dev/pts/1' created. modem `hw:0' created. TTY is `/dev/pts/1' followed by an infinite number of messages like this: error: cannot set channels for playback: Invalid argument I go in minicom and type atdt30095525 and it only returns NO CARRIER . The phone line cable is properly connected like when I tried it under Windows. What can be the problem now? Are you sure this is the right driver? In Windows it says Agere HDA. -- Regards, Manuel Lemos Metastorage - Data object relational mapping layer generator http://www.metastorage.net/ PHP Classes - Free ready to use OOP components written in PHP http://www.phpclasses.org/
