Marvin,
SUCCESS! wvdial seems to be dialing in. It now gets
stopped after the password for my account
(NTS-online).
NTS gives be back BAD PASSWORD on the two accounts I
have, and after several calls their help line does not
know what to do for that - yet! I installed a modem in
a WinXP machine, and got the same result using
Hyperterminal.
I have tried the logins at other dial-ins, including
Juno, attempting a guest account, and it looks like I
get a welcome screen from Juno.
Reworking some of your previous suggestions into a
script file, I got the results shown below. wvdial
dials in, and goes thru
connnection to login and password.
What does NOT happen is something like a Hyperteminal
window. Is that what I should get? Is there another
peice of
software I should try for that? I cannot find out how
to start Gnome-ppp from the command line.
I have not yet installed the slamr-2.6.22-14-generic
tar you sent me, will do that after I determine I have
an
account I can get into, unless you think it important.
I have the question of how I should unpack it. I tried
gunzip,
and it unzipped and put the tar in my home holder. I
have not tried tar on that yet; I'm still a newbie on
all this.
Thanks for getting me this far.
Bob Terrell
////////////////////////////////
Listings below in order:
SCRIPT TO SHUT DOWN ETH0 AND START MODEM
WVDIAL.JUNO IN PLACE OF WVDIAL.CONF
LOG OF FIRST TERMINAL
LOG OF SECOND TERMINAL
///////////////////////////////
SCRIPT TO SHUT DOWN ETH0 AND START MODEM
#!/bin/bash
# startmodem - shut down eth0 and start modem - Bob
Terrell 11/11/07
#---------------------------------
# shut down eth0 as e100 and release and restart slamr
echo SHUTTING DOWN eth0
sudo ifconfig eth0 down
sudo modprobe -r e100
echo TOGGLE SLAMR
sudo modprobe -r slamr
sudo modprobe slamr
4
#---------------------------
# start slmodemd with debug and logging
echo SHUT DOWN sl-modem-daemon
sudo /etc/init.d/sl-modem-daemon stop
echo START SLMODEMD
sudo slmodemd -c USA --log --debug=1 /dev/slamr0
echo NOW START WVDIAL IN A SEPARATE TERMINAL WINDOW
#------------------------
# end of startmodem
///////////////////////////////////////
WVDIAL.JUNO IN PLACE OF WVDIAL.CONF
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
New PPPD = yes
Phone = 4721804
Modem = /dev/ttySL0
Username = guest
Carrier check = no
Password = guest
Baud = 460800
////////////////////////////////////
LOG OF FIRST TERMINAL
$ sudo ./startmodem
Password:
SHUTTING DOWN eth0
TOGGLE SLAMR
FATAL: Module slamr is in use.
SHUT DOWN sl-modem-daemon
Shutting down SmartLink Modem driver normally.
Unloading modem driver from kernel ... slamr.
START SLMODEMD
SmartLink Soft Modem: version 2.9.9e-pre1 Mar 20 2007
14:45:09
<107.398718> SmartLink Soft Modem: version 2.9.9e-pre1
Mar 20 2007 14:45:09
<107.398990> slamr0: startup modem...
<107.399199> slamr0: update termios...
symbolic link `/dev/ttySL0' -> `/dev/pts/0' created.
modem `slamr0' created. TTY is `/dev/pts/0'
<107.400271> open file:
/var/lib/slmodem/data.slamr0...
<107.400392> cannot open
'/var/lib/slmodem/data.slamr0': No such file or
directory
<107.401414> main: rt applyed: SCHED_FIFO, pri 99
<107.401723> main: dropped privileges to 119.109
Use `/dev/ttySL0' as modem device, Ctrl+C for
termination.
<189.179800> main: termios changed.
<189.179869> slamr0: update termios...
<189.275670> main: termios changed.
<189.275738> slamr0: update termios...
<189.375524> slamr0: run cmd: ATZ
<189.375595> slamr0: modem reset...
<189.375612> slamr0: modem set state: 1 --> 1...
<189.375632> slamr0: modem set mode: -> 0...
<189.375650> slamr0: modem report result: 0 (OK)
<189.475627> slamr0: run cmd:
ATQ0V1E1S0=0&C1&D2+FCLASS=0
<189.475720> slamr0: modem set mode: -> 0...
<189.475740> slamr0: modem report result: 0 (OK)
<189.575705> slamr0: run cmd: ATDT4721804
<189.575784> slamr0: modem dial: T4721804...
<189.575803> slamr0: modem_dial_start...
<189.576475> slamr0: modem_start..
<189.576493> slamr0: modem set state: 1 --> 2...
<189.576510> slamr0: new state: DP_ESTAB
<189.576527> main: modemap_ioctl: cmd 8, arg 3...
<189.576554> slamr0: modem set hook: 0 --> 1...
<189.576572> main: modemap_ioctl: cmd 2, arg 1...
<189.576600> main: modemap_ioctl: cmd 11, arg 0...
<189.576689> main: modemap_ioctl: cmd 4, arg 2580...
<189.576711> main: modemap_ioctl: cmd 7, arg 30...
<189.576728> main: modemap_start...
<199.956451> slamr0: 99600: change dp: --> 8...
<201.581360> main: modemap_ioctl: cmd 10, arg 0...
<201.581417> slamr0: 115200: change dp: --> 92...
<201.584372> main: modemap_ioctl: cmd 10, arg 0...
<201.586245> main: change delay -48...
<201.591225> main: change delay -48...
<201.596268> main: change delay -4...
<203.911221> main: change delay +100...
<218.924934> slamr0: modem_update_status: 256
<218.924962> slamr0: --> DP LINK
<218.924984> slamr0: modem set state: 2 --> 4...
<218.925006> slamr0: new state: EC_ESTAB
<218.925023> slamr0: modem_update_status: 1024
<218.925041> slamr0: --> PACK LINK
<218.925057> slamr0: hdlc_start...
<219.119914> slamr0: modem update config...
<219.119945> slamr0: ec = 1 (1)
<219.119962> slamr0: ec_detector = 1 (1)
<219.119979> slamr0: ec_tx_win_size = 15 (15)
<219.119996> slamr0: ec_rx_win_size = 15 (15)
<219.120012> slamr0: ec_tx_info_size = 128 (128)
<219.120029> slamr0: ec_rx_info_size = 128 (128)
<219.120046> slamr0: comp = 3
(3)slamr-2.6.22-14-generic
<219.120062> slamr0: comp_dict_size = 2048 (2048)
<219.120079> slamr0: comp_max_string = 32 (34)
<219.244880> slamr0: modem_update_status: 4096
<219.244922> slamr0: --> EC LINK
<219.244939> slamr0: modem set state: 4 --> 5...
<219.244957> slamr0: new state: MODEM_ONLINE
<219.244983> slamr0: modem report result: 1 (CONNECT)
<219.245012> main: modemap_ioctl: cmd 8, arg 0...
<221.382784> main: termios changed.
<221.382823> slamr0: update termios...
<246.462442> slamr0: hdlc frame integrity error.
<248.507042> main: change delay -48...
<248.512046> main: change delay -48...
<248.517042> main: change delay -4...
<251.641910> slamr0: modem_update_status: 4
<251.641939> slamr0: --> FINISH.
<251.641956> slamr0: modem_hup...
<251.641973> slamr0: modem set state: 5 --> 9...
<251.641992> slamr0: new state: DP_DISC
<251.642017> slamr0: modem_stop..
<251.642034> main: modemap_stop...
<251.642078> slamr0: modem set hook: 1 --> 0...
<251.642097> main: modemap_ioctl: cmd 2, arg 0...
<251.642125> main: modemap_ioctl: cmd 8, arg 0...
<251.642350> slamr0: modem set state: 9 --> 1...
<251.642369> slamr0: new state: MODEM_IDLE
<251.642386> slamr0: modem report result: 3 (NO
CARRIER)
<251.642420> main: dev write = 0
<252.634301> main: pty closed.
<252.634375> slamr0: modem_hup...
<252.634507> slamr0: update termios...
error: cannot chown '/dev/pts/3' to ':dialout':
Operation not permitted
error: cannot create symbolink link `/dev/ttySL0' ->
`/dev/pts/3': File exists
<257.757180> main: signal 2: mark termination.
<257.757273> slamr0: modem_delete...
NOW START WVDIAL IN A SEPARATE TERMINAL WINDOW
$
slamr-2.6.22-14-generic
///////////////////////////////////////////
LOG OF SECOND TERMINAL
$ wvdial -C ./wvdial.juno
--> WvDial: Internet dialer version 1.56
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT4721804
--> Waiting for carrier.
ATDT4721804
CONNECT 46667
--> Carrier detected. Waiting for prompt.
Level 3 Comm nas47.2ar1 UQKT2
Username:/login:/Login:
--> Looks like a login prompt.
--> Sending: guest
guest
Password:
--> Looks like a password prompt.
--> Sending: (password)
Entering PPP Session.
IP address is 4.253.0.246
MTU is 1524.
--> Looks like a welcome message.
--> Starting pppd at Mon Nov 12 17:47:00 2007
--> Pid of pppd: 5657
--> Using interface ppp0
--> local IP address 4.253.0.246
--> remote IP address 63.215.29.15
--> primary DNS address 64.136.52.103
--> secondary DNS address 64.136.44.103
Caught signal 2: Attempting to exit gracefully...
--> Terminating on signal 15
--> Connect time 0.4 minutes.
--> Disconnecting at Mon Nov 12 17:47:26 2007
$
//////////////////////////////////
Bob Terrell
Lubbock, Texas
bob_terrell_texas@xxxxxxxxx
____________________________________________________________________________________
Get easy, one-click access to your favorites.
Make Yahoo! your homepage.
http://www.yahoo.com/r/hs
