Bob, Good progress. RE: START SLMODEMD SmartLink Soft Modem: version 2.9.9e-pre1 Mar 20 2007 -------- 2.9.9e-pre1 is the version installed by the sl-modem-deamon package. It should be replaced by the $ slmodemd --version SmartLink Soft Modem: version 2.9.11 -------- that is in my slamr package. Within that package: $ sudo cp slmodemd /usr/sbin/slmodemd $ sudo chmod +x /usr/sbin/slmodemd Then check with: $ slmodemd --version If you wish, you can edit $ sudo gedit /etc/default/sl-modem-daemon to DONTSTART=1 so that you don't have to do the manual stop. RE: $ wvdial -C ./wvdial.juno you need sudo: $ sudo wvdial -C ./wvdial.juno Try these and report back. MarvS On Nov 12, 2007 7:13 PM, Bob Terrell <bob_terrell_texas@xxxxxxxxx> wrote: > Marvin, > > SUCCESS! wvdial seems to be dialing in. It now gets > stopped after the password for my account > (NTS-online). > NTS gives be back BAD PASSWORD on the two accounts I > have, and after several calls their help line does not > > know what to do for that - yet! I installed a modem in > a WinXP machine, and got the same result using > Hyperterminal. > I have tried the logins at other dial-ins, including > Juno, attempting a guest account, and it looks like I > get a welcome screen from Juno. > > Reworking some of your previous suggestions into a > script file, I got the results shown below. wvdial > dials in, and goes thru > connnection to login and password. > > What does NOT happen is something like a Hyperteminal > window. Is that what I should get? Is there another > peice of > software I should try for that? I cannot find out how > to start Gnome-ppp from the command line. > > I have not yet installed the slamr-2.6.22-14-generic > tar you sent me, will do that after I determine I have > an > account I can get into, unless you think it important. > I have the question of how I should unpack it. I tried > gunzip, > and it unzipped and put the tar in my home holder. I > have not tried tar on that yet; I'm still a newbie on > all this. > > Thanks for getting me this far. > Bob Terrell > > //////////////////////////////// > Listings below in order: > SCRIPT TO SHUT DOWN ETH0 AND START MODEM > WVDIAL.JUNO IN PLACE OF WVDIAL.CONF > LOG OF FIRST TERMINAL > LOG OF SECOND TERMINAL > > /////////////////////////////// > SCRIPT TO SHUT DOWN ETH0 AND START MODEM > #!/bin/bash > # startmodem - shut down eth0 and start modem - Bob > Terrell 11/11/07 > > #--------------------------------- > # shut down eth0 as e100 and release and restart slamr > echo SHUTTING DOWN eth0 > sudo ifconfig eth0 down > sudo modprobe -r e100 > echo TOGGLE SLAMR > sudo modprobe -r slamr > sudo modprobe slamr > 4 > #--------------------------- > > # start slmodemd with debug and logging > echo SHUT DOWN sl-modem-daemon > sudo /etc/init.d/sl-modem-daemon stop > echo START SLMODEMD > sudo slmodemd -c USA --log --debug=1 /dev/slamr0 > echo NOW START WVDIAL IN A SEPARATE TERMINAL WINDOW > > #------------------------ > # end of startmodem > > /////////////////////////////////////// > WVDIAL.JUNO IN PLACE OF WVDIAL.CONF > > [Dialer Defaults] > Init1 = ATZ > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > Modem Type = Analog Modem > ISDN = 0 > New PPPD = yes > Phone = 4721804 > Modem = /dev/ttySL0 > Username = guest > Carrier check = no > Password = guest > Baud = 460800 > > //////////////////////////////////// > LOG OF FIRST TERMINAL > $ sudo ./startmodem > Password: > SHUTTING DOWN eth0 > TOGGLE SLAMR > FATAL: Module slamr is in use. > SHUT DOWN sl-modem-daemon > Shutting down SmartLink Modem driver normally. > Unloading modem driver from kernel ... slamr. > START SLMODEMD > SmartLink Soft Modem: version 2.9.9e-pre1 Mar 20 2007 > 14:45:09 > <107.398718> SmartLink Soft Modem: version 2.9.9e-pre1 > Mar 20 2007 14:45:09 > <107.398990> slamr0: startup modem... > <107.399199> slamr0: update termios... > symbolic link `/dev/ttySL0' -> `/dev/pts/0' created. > modem `slamr0' created. TTY is `/dev/pts/0' > <107.400271> open file: > /var/lib/slmodem/data.slamr0... > <107.400392> cannot open > '/var/lib/slmodem/data.slamr0': No such file or > directory > <107.401414> main: rt applyed: SCHED_FIFO, pri 99 > <107.401723> main: dropped privileges to 119.109 > Use `/dev/ttySL0' as modem device, Ctrl+C for > termination. > <189.179800> main: termios changed. > <189.179869> slamr0: update termios... > <189.275670> main: termios changed. > <189.275738> slamr0: update termios... > <189.375524> slamr0: run cmd: ATZ > <189.375595> slamr0: modem reset... > <189.375612> slamr0: modem set state: 1 --> 1... > <189.375632> slamr0: modem set mode: -> 0... > <189.375650> slamr0: modem report result: 0 (OK) > <189.475627> slamr0: run cmd: > ATQ0V1E1S0=0&C1&D2+FCLASS=0 > <189.475720> slamr0: modem set mode: -> 0... > <189.475740> slamr0: modem report result: 0 (OK) > <189.575705> slamr0: run cmd: ATDT4721804 > <189.575784> slamr0: modem dial: T4721804... > <189.575803> slamr0: modem_dial_start... > <189.576475> slamr0: modem_start.. > <189.576493> slamr0: modem set state: 1 --> 2... > <189.576510> slamr0: new state: DP_ESTAB > <189.576527> main: modemap_ioctl: cmd 8, arg 3... > <189.576554> slamr0: modem set hook: 0 --> 1... > <189.576572> main: modemap_ioctl: cmd 2, arg 1... > <189.576600> main: modemap_ioctl: cmd 11, arg 0... > <189.576689> main: modemap_ioctl: cmd 4, arg 2580... > <189.576711> main: modemap_ioctl: cmd 7, arg 30... > <189.576728> main: modemap_start... > <199.956451> slamr0: 99600: change dp: --> 8... > <201.581360> main: modemap_ioctl: cmd 10, arg 0... > <201.581417> slamr0: 115200: change dp: --> 92... > <201.584372> main: modemap_ioctl: cmd 10, arg 0... > <201.586245> main: change delay -48... > <201.591225> main: change delay -48... > <201.596268> main: change delay -4... > <203.911221> main: change delay +100... > <218.924934> slamr0: modem_update_status: 256 > <218.924962> slamr0: --> DP LINK > <218.924984> slamr0: modem set state: 2 --> 4... > <218.925006> slamr0: new state: EC_ESTAB > <218.925023> slamr0: modem_update_status: 1024 > <218.925041> slamr0: --> PACK LINK > <218.925057> slamr0: hdlc_start... > <219.119914> slamr0: modem update config... > <219.119945> slamr0: ec = 1 (1) > <219.119962> slamr0: ec_detector = 1 (1) > <219.119979> slamr0: ec_tx_win_size = 15 (15) > <219.119996> slamr0: ec_rx_win_size = 15 (15) > <219.120012> slamr0: ec_tx_info_size = 128 (128) > <219.120029> slamr0: ec_rx_info_size = 128 (128) > <219.120046> slamr0: comp = 3 > (3)slamr-2.6.22-14-generic > <219.120062> slamr0: comp_dict_size = 2048 (2048) > <219.120079> slamr0: comp_max_string = 32 (34) > <219.244880> slamr0: modem_update_status: 4096 > <219.244922> slamr0: --> EC LINK > <219.244939> slamr0: modem set state: 4 --> 5... > <219.244957> slamr0: new state: MODEM_ONLINE > <219.244983> slamr0: modem report result: 1 (CONNECT) > <219.245012> main: modemap_ioctl: cmd 8, arg 0... > <221.382784> main: termios changed. > <221.382823> slamr0: update termios... > <246.462442> slamr0: hdlc frame integrity error. > <248.507042> main: change delay -48... > <248.512046> main: change delay -48... > <248.517042> main: change delay -4... > <251.641910> slamr0: modem_update_status: 4 > <251.641939> slamr0: --> FINISH. > <251.641956> slamr0: modem_hup... > <251.641973> slamr0: modem set state: 5 --> 9... > <251.641992> slamr0: new state: DP_DISC > <251.642017> slamr0: modem_stop.. > <251.642034> main: modemap_stop... > <251.642078> slamr0: modem set hook: 1 --> 0... > <251.642097> main: modemap_ioctl: cmd 2, arg 0... > <251.642125> main: modemap_ioctl: cmd 8, arg 0... > <251.642350> slamr0: modem set state: 9 --> 1... > <251.642369> slamr0: new state: MODEM_IDLE > <251.642386> slamr0: modem report result: 3 (NO > CARRIER) > <251.642420> main: dev write = 0 > <252.634301> main: pty closed. > <252.634375> slamr0: modem_hup... > <252.634507> slamr0: update termios... > error: cannot chown '/dev/pts/3' to ':dialout': > Operation not permitted > error: cannot create symbolink link `/dev/ttySL0' -> > `/dev/pts/3': File exists > <257.757180> main: signal 2: mark termination. > <257.757273> slamr0: modem_delete... > NOW START WVDIAL IN A SEPARATE TERMINAL WINDOW > $ > slamr-2.6.22-14-generic > /////////////////////////////////////////// > LOG OF SECOND TERMINAL > $ wvdial -C ./wvdial.juno > --> WvDial: Internet dialer version 1.56 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Sending: ATDT4721804 > --> Waiting for carrier. > ATDT4721804 > CONNECT 46667 > --> Carrier detected. Waiting for prompt. > Level 3 Comm nas47.2ar1 UQKT2 > Username:/login:/Login: > --> Looks like a login prompt. > --> Sending: guest > guest > Password: > --> Looks like a password prompt. > --> Sending: (password) > Entering PPP Session. > IP address is 4.253.0.246 > MTU is 1524. > --> Looks like a welcome message. > --> Starting pppd at Mon Nov 12 17:47:00 2007 > --> Pid of pppd: 5657 > --> Using interface ppp0 > --> local IP address 4.253.0.246 > --> remote IP address 63.215.29.15 > --> primary DNS address 64.136.52.103 > --> secondary DNS address 64.136.44.103 > Caught signal 2: Attempting to exit gracefully... > --> Terminating on signal 15 > --> Connect time 0.4 minutes. > --> Disconnecting at Mon Nov 12 17:47:26 2007 > $ > > ////////////////////////////////// > > > > > Bob Terrell > Lubbock, Texas > bob_terrell_texas@xxxxxxxxx > > > > > ____________________________________________________________________________________ > Get easy, one-click access to your favorites. > Make Yahoo! your homepage. > http://www.yahoo.com/r/hs >
