Andrew Your modem is hosted on the audio card00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link00:06.0 0401: 10b9:5451 (rev 01) Subsystem: 1179:0001with Subsystem 1179:0001 having an LSI/AgereSystems softmodem chip. Faking your System with:$ ./scanModem test 10b9:5451 1179:0001 ouputs as expected with ModemData.txt----------------------------------------------------------- Download from http://linmodems.technion.ac.il/packages/smartlink/ the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with: $ tar zxf SLMODEMD.gcc4.1.tar.gz and read instructions therein. But briefly, the modem is setup with command: sudo slmodemd -c USA --alsa -s hw:0,1 reporting dynamic creation of ports: /dev/ttySL0 --> /dev/pts/N , with N some number Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance-------------------------------------------------------------Low level modem support is included within the snd-ali5451 driver withhigher level COMM functions provided through the complementaryslmodemd Do run on your System also$ ./scanModem test 10b9:5451 1179:0001to get Gutsy specific advice. Will report on your andrews.gz later. MarvS On 10/24/07, Andrew Struiksma <astruiksma@xxxxxxxxxx> wrote:> Here is the output of> $ lscpi>> 00:00.0 Host bridge: ALi Corporation M1644/M1644T Northbridge+Trident (rev 01)> 00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller> 00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)> 00:04.0 IDE interface: ALi Corporation M5229 IDE (rev c3)> 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 01)> 00:07.0 ISA bridge: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+]> 00:08.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]> 00:0a.0 Ethernet controller: Intel Corporation 82557/8/9 Ethernet Pro 100 (rev 08)> 00:11.0 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to Cardbus Bridge with ZV Support (rev 32)> 00:11.1 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to Cardbus Bridge with ZV Support (rev 32)> 00:12.0 System peripheral: Toshiba America Info Systems SD TypA Controller (rev 03)> 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade XPAi1 (rev 82)>> And the output of> $ lspci -nv>> 00:00.0 0600: 10b9:1644 (rev 01)> Flags: bus master, medium devsel, latency 0> Memory at f0000000 (32-bit, prefetchable) [size=64M]> Capabilities: [b0] AGP version 2.0> Capabilities: [a4] Power Management version 1>> 00:01.0 0604: 10b9:5247 (prog-if 00 [Normal decode])> Flags: bus master, slow devsel, latency 0> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0> Memory behind bridge: f7f00000-fdffffff> Prefetchable memory behind bridge: 30000000-300fffff>> 00:02.0 0c03: 10b9:5237 (rev 03) (prog-if 10 [OHCI])> Subsystem: 1179:0004> Flags: bus master, medium devsel, latency 64, IRQ 11> Memory at f7eff000 (32-bit, non-prefetchable) [size=4K]> Capabilities: [60] Power Management version 2>> 00:04.0 0101: 10b9:5229 (rev c3) (prog-if f0)> Subsystem: 1179:0004> Flags: bus master, medium devsel, latency 64, IRQ 255> [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]> [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]> [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]> [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]> I/O ports at eff0 [size=16]> Capabilities: [60] Power Management version 2>> 00:06.0 0401: 10b9:5451 (rev 01)> Subsystem: 1179:0001> Flags: bus master, medium devsel, latency 64, IRQ 11> I/O ports at 1000 [size=256]> Memory at 30100000 (32-bit, non-prefetchable) [size=4K]> Capabilities: [dc] Power Management version 2>> 00:07.0 0601: 10b9:1533> Subsystem: 1179:0004> Flags: bus master, medium devsel, latency 0> Capabilities: [a0] Power Management version 1>> 00:08.0 0680: 10b9:7101> Subsystem: 1179:0001> Flags: medium devsel>> 00:0a.0 0200: 8086:1229 (rev 08)> Subsystem: 1179:0003> Flags: bus master, medium devsel, latency 64, IRQ 11> Memory at f7efe000 (32-bit, non-prefetchable) [size=4K]> I/O ports at eec0 [size=64]> Memory at f7d00000 (32-bit, non-prefetchable) [size=1M]> Capabilities: [dc] Power Management version 2>> 00:11.0 0607: 1179:0617 (rev 32)> Subsystem: 1179:0001> Flags: bus master, slow devsel, latency 168, IRQ 11> Memory at 30101000 (32-bit, non-prefetchable) [size=4K]> Bus: primary=00, secondary=02, subordinate=05, sec-latency=0> Memory window 0: 20000000-23fff000 (prefetchable)> Memory window 1: 24000000-27fff000> I/O window 0: 00001400-000014ff> I/O window 1: 00001800-000018ff> 16-bit legacy interface ports at 0001>> 00:11.1 0607: 1179:0617 (rev 32)> Subsystem: 1179:0001> Flags: bus master, slow devsel, latency 168, IRQ 11> Memory at 30102000 (32-bit, non-prefetchable) [size=4K]> Bus: primary=00, secondary=06, subordinate=09, sec-latency=0> Memory window 0: 28000000-2bfff000 (prefetchable)> Memory window 1: 2c000000-2ffff000> I/O window 0: 00001c00-00001cff> I/O window 1: 00002000-000020ff> 16-bit legacy interface ports at 0001>> 00:12.0 0880: 1179:0805 (rev 03)> Subsystem: 1179:0001> Flags: medium devsel, IRQ 255> Memory at 30103000 (32-bit, non-prefetchable) [disabled] [size=512]> Capabilities: [80] Power Management version 2>> 01:00.0 0300: 1023:8820 (rev 82) (prog-if 00 [VGA])> Subsystem: 1179:0001> Flags: bus master, 66MHz, medium devsel, latency 8, IRQ 11> Memory at fc000000 (32-bit, non-prefetchable) [size=32M]> Memory at fbc00000 (32-bit, non-prefetchable) [size=4M]> Memory at f8000000 (32-bit, non-prefetchable) [size=32M]> Memory at f7ff8000 (32-bit, non-prefetchable) [size=32K]> [virtual] Expansion ROM at 30000000 [disabled] [size=64K]> Capabilities: [80] AGP version 2.0> Capabilities: [90] Power Management version 2>>> I ran scanModem as root the first time.>>> Andrew>> -----Original Message-----> From: Marvin Stodolsky [mailto:marvin.stodolsky@xxxxxxxxx]> Sent: Wednesday, October 24, 2007 2:29 PM> To: Andrew Struiksma> Cc: DISCUSS@xxxxxxxxxxxxx> Subject: Re: Toshiba Protégé 4000>> Andrew>> A large expected mid-section of ModemData.txt is missing.> Please run> $ bash -x ./scanModem 2>&1 | tee andrews Then $ gzip andrews and send it to me the andrews.gz so i can identify the problem.>> Also do:> $ lspci> $ lspci -nv> and send these outputs to the List.> For an AMR modem, this will be sufficient.>> Also run> $ sudo ./scanModem> and see it there is more output to ModemData.txt>> MarvS> scanModem maintainer>