Re: slmodemd NO CARRIER error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Robikhun,

Since the dialout worked last week and is not reproduceable, it is
likely a phone line quality problem.
Read the wvdial.txt
Try adding to the end of the Init2 =  line , the
    +MS=90
as substittute for a default    +MS=92
If this does not improve the situation. try instead   +MS=34

MarvS

On 10/23/07, Robikhun (robihun) <robihun@xxxxxxxxxxx> wrote:
> Look like slmodemd is still not established yet.
> Last weekend I have no connection problem but three last weekday I just
> have 1 time connected using dial up. The rest is always no carrier
> again.
> I tried using Windows and there is no problem on it.
> This is the log.
>
> Do you have idea if it is software problem?
>
> Thanks
>
> $ sudo slmodemd --alsa -c INDONESIA --debug hw:0,6
> del
> <941.422349> main: dev write = 0
> <941.422682> hw:0,6: run cmd: ATDT96,080999999
> <941.422697> hw:0,6: modem dial: T96,080999999...
> <941.422706> hw:0,6: modem_dial_start...
> <941.422747> hw:0,6: modem_start..
> <941.422757> hw:0,6: modem set state: 1 --> 2...
> <941.422767> hw:0,6: new state: DP_ESTAB
> <941.422776> main: alsa_ioctl: cmd 8, arg 3...
> <941.422785> hw:0,6: modem set hook: 0 --> 1...
> <941.422795> main: alsa_ioctl: cmd 2, arg 1...
> <941.430232> main: alsa_ioctl: cmd 11, arg 0...
> <941.430363> main: alsa_ioctl: cmd 4, arg 2580...
> <941.430375> main: alsa_ioctl: cmd 7, arg 30...
> <941.430385> main: alsa_start...
> Hardware PCM card 0 'HDA Intel' device 6 subdevice 0
> Its setup is:
>   stream       : PLAYBACK
>   access       : RW_INTERLEAVED
>   format       : S16_LE
>   subformat    : STD
>   channels     : 1
>   rate         : 9600
>   exact rate   : 9600 (9600/1)
>   msbits       : 16
>   buffer_size  : 2048
>   period_size  : 64
>   period_time  : 6666
>   tick_time    : 4000
>   tstamp_mode  : NONE
>   period_step  : 1
>   sleep_min    : 0
>   avail_min    : 4
>   xfer_align   : 4
>   start_threshold  : 2147483647
>   stop_threshold   : 2048
>   silence_threshold: 0
>   silence_size : 0
>   boundary     : 1073741824
> Hardware PCM card 0 'HDA Intel' device 6 subdevice 0
> Its setup is:
>   stream       : CAPTURE
>   access       : RW_INTERLEAVED
>   format       : S16_LE
>   subformat    : STD
>   channels     : 1
>   rate         : 9600
>   exact rate   : 9600 (9600/1)
>   msbits       : 16
>   buffer_size  : 2048
>   period_size  : 64
>   period_time  : 6666
>   tick_time    : 4000
>   tstamp_mode  : NONE
>   period_step  : 1
>   sleep_min    : 0
>   avail_min    : 4
>   xfer_align   : 4
>   start_threshold  : 2147483647
>   stop_threshold   : 2048
>   silence_threshold: 0
>   silence_size : 0
>   boundary     : 1073741824
> <941.478520> main: startup write: 384...
> <941.478595> main: alsa xrun: try to recover...
> <941.502272> main: alsa xrun: recovered.
> <941.502298> main: dev read = 0
> <941.722413> hw:0,6: modem_tty_write: hangup...
> <941.722442> hw:0,6: modem_hup...
> <941.722452> hw:0,6: modem set state: 2 --> 9...
> <941.722463> hw:0,6: new state: DP_DISC
> <941.728970> hw:0,6: modem_stop..
> <941.729002> main: alsa_stop...
> <941.742253> hw:0,6: modem set hook: 1 --> 0...
> <941.742298> main: alsa_ioctl: cmd 2, arg 0...
> <941.750264> main: alsa_ioctl: cmd 8, arg 0...
> <941.750312> hw:0,6: modem set state: 9 --> 1...
> <941.750324> hw:0,6: new state: MODEM_IDLE
> <941.750333> hw:0,6: modem report result: 3 (NO CARRIER)
>

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux