It is correct that hw:0,6 $ cat /proc/asound/pcm 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 00-02: ALC883 Analog : ALC883 Analog : capture 2 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 2 $ sudo slmodemd --alsa -c INDONESIA hw:0,6 SmartLink Soft Modem: version 2.9.11 Aug 6 2007 22:02:27 symbolic link `/dev/ttySL0' -> `/dev/pts/2' created. modem `hw:0,6' created. TTY is `/dev/pts/2' Use `/dev/ttySL0' as modem device, Ctrl+C for termination. Open other terminal and dial @ sudo wvdial --> WvDial: Internet dialer version 1.56 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Sending: ATDT92080989999 --> Waiting for carrier. ATDT92080989999 NO CARRIER ERROR I also tried another commands $ sudo wvdial --config wvtest --> WvDial: Internet dialer version 1.56 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Configuration does not specify a valid phone number. --> Configuration does not specify a valid login name. --> Configuration does not specify a valid password. Although the wvdialconf is correct $ sudo gedit /etc/wvdial.conf [Dialer Defaults] Modem = /dev/ttySL0 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ; Stupid Mode = yes Modem Type = Analog Modem Phone = 92080989999 New PPPD = yes ISDN = 0 Username = telkomnet@instan Carrier Check = no Password = telkom Baud = 460800 I also tried this command $ pon $ plog pppd[7685]: pppd 2.4.4 started by robihun, uid 1000 chat[7687]: Can't get terminal parameters: Input/output error pppd[7685]: Connect script failed pppd[7685]: Exit. -----Original Message----- From: Marvin Stodolsky [mailto:marvin.stodolsky@xxxxxxxxx] Sent: Monday, October 08, 2007 9:02 AM To: Robikhun (robihun) Cc: Linmodems Subject: Re: slmodemd NO CARRIER error Robikhun, You never sent us the entire ModemData.txt so we can't be sure your hardware (hw0,N) specification is correct. There is clearly a problem with: <275.674571> err: hw:0,6: modem start = -22: cannot start device. If your /proc/asound/pcm is similar to: 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 2 then $ sudo slmodemd -c USA --alsa hw:0,6 would be the correct modem setup command. But if $ cat /proc/asound/pcm displays like: 00-01: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture then the proper setup command would be: $ sudo slmodemd -c USA --alsa hw:0,1 The translation is like 00-01: --> hw:0,1 or generally 00-0N: --> hw:0,N MarvS On 10/7/07, Robikhun (robihun) <robihun@xxxxxxxxxxx> wrote: > Marvin > > I have add the line > Carrier Check = no > > But still got NO CARRIER ERROR > > $ sudo wvdialconf /etc/wvdial.conf Editing `/etc/wvdial.conf'. > > Scanning your serial ports for a modem. > > Modem Port Scan<*1>: S0 S1 S2 S3 > WvModem<*1>: Cannot get information for serial port. > ttySL0<*1>: ATQ0 V1 E1 -- OK > ttySL0<*1>: ATQ0 V1 E1 Z -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem > ttySL0<*1>: Speed 4800: AT -- OK > ttySL0<*1>: Speed 9600: AT -- OK > ttySL0<*1>: Speed 19200: AT -- OK > ttySL0<*1>: Speed 38400: AT -- OK > ttySL0<*1>: Speed 57600: AT -- OK > ttySL0<*1>: Speed 115200: AT -- OK > ttySL0<*1>: Speed 230400: AT -- OK > ttySL0<*1>: Speed 460800: AT -- OK > ttySL0<*1>: Max speed is 460800; that should be safe. > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > > Found a modem on /dev/ttySL0. > Modem configuration written to /etc/wvdial.conf. > ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > > $ sudo wvdial > --> WvDial: Internet dialer version 1.56 Cannot get information for > --> serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Sending: ATDT92080989999 > --> Waiting for carrier. > ATDT92080989999 > NO CARRIER > > Jacques > Some of my ModemData is > > 8086:27d8 is a High Definition Audio card, possibly hosting a soft > modem. > Bootup diagnostics lack ALSA data. > and a NEW HDA softmodem controller. > > The HDA modem codec file is: /proc/asound/card0/codec#1 > ----------------------------------- > Codec: Motorola Si3054 > Address: 1 > Vendor Id: 0x10573055 > Subsystem Id: 0x10573055 > Revision Id: 0x100700 > > The audio card hosts a softmodem chip with Vendor ID: 0x10573055 > > HDAmodemChip=0x10573055 > For candidate modem in PCI bus: 00:1b.0 > Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G > Primary PCI_id NEW_softmodem_8086:27d8 > Support type needed or chipset: slmodemd > > An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel > provides Low Level support enabling contact with the modem hardware. > For all BUT Conexant chip soft modems (using hsfmodem software) > complementary High Level support is through a Smartlink utility: > slmodemd > > Download from > http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD.gcc4.1.tar.g > z having a compiled slmodemd. > > > > -----Original Message----- > From: Jacques Goldberg [mailto:Jacques.Goldberg@xxxxxxx] > Sent: Friday, October 05, 2007 5:26 PM > To: Robikhun (robihun) > Cc: discuss@xxxxxxxxxxxxx > Subject: Re: slmodemd NO CARRIER error > > Robikhun, > > 2-Your log is not usable because it only shows one command, slmodemd. > slmodemd does not dial. Your log reports a dial. We cannot guess what > you did in between. > If you did not use wvdial to try to start the connection but something > else, read http://linmodems.technion.ac.il/wvdial.html because using > wvdial gives a complete report making it possible to locate where the > problem occurs. >
