instructions for upgrading snd-hda-intel and its dependent driver set at http://linmodems.technion.ac.il/archive-seventh/msg00282.html MarvS On 10/4/07, Pablo Marcondes <pablo.mmarcondes@xxxxxxxxx> wrote: > Hi Marvin, and all... > > I've this modem working with SLMODEMD-4.1 precompiled, adding string > +MS=34 to init2. But it only works with alsa 1.0.14, but I need it to > work with alsa 1.0.15rc2 because the sound card is an ALC268. > > What output do I need to send to help someone to fix it? > > Thanks in advance, > > Pablo > > 2007/8/10, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>: > > Eugenio > > > > Start with: > > --------------- > > Download from http://linmodems.technion.ac.il/packages/smartlink/ > > $ tar zxf SLMODEMD.-1.0.13.tar.gz > > and read instructions therein. But briefly, the modem is setup with command: > > sudo slmodemd -c ITALY --alsa hw:0,6 > > reporting dynamic creation of ports: > > /dev/ttySL0 --> /dev/pts/N , with N some number > > Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance. > > -------------------- > > and test. > > Are you comfortable with compiling? > > On your new Gutsy installation, it might be better to use a slmodemd > > compiled with ALSA version 1.0.14rc4 resources. > > You first need to install the package libasound2-dev > > Read the instructions in Smartlink.txt for compiling an ALSA competent slmodemd > > > > MarvS > > scanModem maintainer > > > > > > On 8/10/07, Eugenio PITTIONI <eugenio.pittioni@xxxxxxxx> wrote: > > > -------------------------- System information ---------------------------- > > > CPU=i686, Ubuntu gutsy (development branch) > > > Linux version 2.6.22-9-generic (buildd@palmer) (gcc version 4.1.3 20070718 > > > (prerelease) (Ubuntu 4.1.2-14ubuntu1)) #1 SMP Fri Aug 3 00:50:37 GMT 2007 > > > scanModem update of: 2007_August_04 > > > > > > > > > ALSAversion 1.0.14rc4 > > > USB modem not detected by lsusb > > > > > > Modem or host audio card candidates have firmware information: > > > > > > PCI slot PCI ID SubsystemID Name > > > ---------- --------- --------- -------------- > > > 00:1b.0 8086:284b 103c:30cc Audio device: Intel Corporation 82801H > > > > > > Modem interrupt assignment and sharing: > > > 23: 22029 19120 IO-APIC-fasteoi HDA Intel > > > > > > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > > > [ 23.924399] hash matches device 0000:00:1b.0 > > > [ 17.332000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> > > > IRQ 23 > > > [ 17.332000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 > > > > > > === Finished modem firmware and bootup diagnostics section. === > > > === Next deducing cogent software === > > > > > > 8086:284b is a High Definition Audio card, possibly hosting a soft modem. > > > Bootup diagnostics lack ALSA data. > > > > > > The HDA modem codec file is: /proc/asound/card0/codec#1 > > > ----------------------------------- > > > Codec: Motorola Si3054 > > > Address: 1 > > > Vendor Id: 0x10573055 > > > Subsystem Id: 0x10573055 > > > Revision Id: 0x100700 > > > > > > The audio card hosts a softmodem chip with Vendor ID: 0x10573055 > > > > > > For candidate modem in PCI bus: 00:1b.0 > > > Class 0403: 8086:284b Audio device: Intel Corporation 82801H > > > Primary PCI_id 8086:284b > > > Subsystem PCI_id 103c:30cc > > > Softmodem codec or Vendor from diagnostics: Motorola_Si3054, a Motorola > > > type. > > > from Archives: > > > > > > > > > This is a NEW softmodem case! Please send the output ModemData.txt > > > to DISCUSS@xxxxxxxxxxxxx , even if further assistance is not needed. > > > It will enrich the Archive and help others! > > > ------------------------------------------- > > > Lacking a dsp (digital signal processing) chip, the modem is a software > > > intensive or "softmodem" type. Its primary controller manages the traffic > > > with the CPU. But the software needed is specified in the Subsystem. > > > ----------------------------------------- > > > Support type needed or chipset: slmodemd > > > > > > An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel > > > provides Low Level support enabling contact with the modem hardware. > > > For all BUT Conexant chip soft modems (using hsfmodem software) > > > complementary High Level support is through a Smartlink utility: slmodemd > > > > > > Download from http://linmodems.technion.ac.il/packages/smartlink/ > > > the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under > > > Linux with: > > > $ tar zxf SLMODEMD.gcc4.1.tar.gz > > > and read instructions therein. But briefly, the modem is setup with command: > > > sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 > > > reporting dynamic creation of ports: > > > /dev/ttySL0 --> /dev/pts/N , with N some number > > > Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance. > > > > > > Already loaded into the kernel is snd-hda-intel and audio drivers it depends > > > on, > > > displayed by: lsmod | grep snd_hda_intel > > > Module Size Used by > > > ------------------------------------- > > > snd_hda_intel 262172 7 > > > snd_pcm 81028 4 snd_hda_intel,snd_pcm_oss > > > snd 56580 20 > > > snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > > > snd_page_alloc 11272 2 snd_hda_intel,snd_pcm > > > > > > > > > The diagnostic outputs for this softmodem section have their raw information > > > in > > > folders and text files under /proc/asound/ which you can browse. The > > > information > > > is from files: > > > /proc/asound/pcm > > > ------------------------------- > > > 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 > > > 00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 2 > > > > > > /proc/asound/modules > > > ------------------------------- > > > 0 snd_hda_intel > > > 10573055 > > > ------------------------------- > > > > > > ------------------------------- > > > Current support status of HDA cards is: > > > Vendor IDs Chip maker Support type > > > ---------- ---------- ------------- > > > 0x14f12bfa Conexant hsfmodem , not slmodemd compatible > > > 0x14f12c06 Conexant hsfmodem , not slmodemd compatible > > > 0x11c13026 AgereSystems snd-hda-intel, slmodemd supported > > > 0x11c11040 AgereSystems " " support not yet available. > > > 0x11c13055 AgereSystems " " , " > > > 0x163c3055 Smartlink " " , " > > > 0x163c3155 " " " , " > > > 0x10573055 Motorola " " , " > > > 0x10573155 " " " , "" > > > as of October 2006. > > > > > > /proc/asound/card0/codec#1 > > > ------------------------------- > > > > > > > > > and from the command: > > > aplay -l | grep -i modem > > > scheda 0: Intel [HDA Intel], dispositivo 6: Si3054 Modem [Si3054 Modem] > > > > > > ----------------end Softmodem section -------------- > > > > > > Writing Intel.txt > > > Writing Smartlink.txt > > > ============ end Smartlink section ===================== > > > > > > Completed candidate modem analyses. > > > > > > The base of the UDEV device file system is: /dev/.udev > > > > > > Versions adequately match for the compiler installed: 4.1.3 > > > and the compiler used in kernel assembly: 4.1.3 > > > > > > > > > > > > Compiling resources appear complete: > > > make utility - /usr/bin/make > > > Compiler version 4.1 > > > kernel_headers base folder /lib/modules/2.6.22-9-generic/build > > > Compressed files at: /usr/src/linux-source-2.6.22.tar.bz2 > > > > > > > > > If a driver compilation files with message including some lack of some > > > FileName.h (stdio.h for example. > > > Some additional kernel-header files need installation to /usr/include. > > > For Debian/Ubuntu related distributions, run the following command to display > > > the needed package list: > > > $ sudo apt-get -s install linux-kernel-devel > > > While some of the files may be on the install CD, others may have to be found > > > through http://packages.ubuntu.com > > > > > > For Ubunut feisty, additional packages required were: > > > build-essential curl debhelper dpkg-dev g++ g++-4.1 gettext git-core gitk > > > html2text intltool-debian kernel-package kernel-wedge libc6-dev > > > libcurl3-gnutls libdigest-sha1-perl liberror-perl libstdc++6-4.1-dev > > > linux-libc-dev po-debconf rcs tcl8.4 tk8.4 > > > > > > > > > Checking pppd properties: > > > -rwsr-xr-- 1 root dip 265088 2007-05-15 12:42 /usr/sbin/pppd > > > > > > In case of an "error 17" "serial loopback" problem, see: > > > http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html > > > > > > To enable dialout without Root permission do: > > > $ su - root (not for Ubuntu) > > > sudo chmod a+x /usr/sbin/pppd > > > or under Ubuntu related Linuxes > > > sudo chmod a+x /usr/sbin/pppd > > > > > > Checking settings of: /etc/ppp/options > > > asyncmap 0 > > > noauth > > > crtscts > > > lock > > > hide-password > > > modem > > > proxyarp > > > lcp-echo-interval 30 > > > lcp-echo-failure 4 > > > noipx > > > > > > In case of a message like: > > > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > > > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > > > > > Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1 eth1:avah > > > Which can interfere with Browser naviagation. > > > > > > Don't worry about the following, it is for the experts > > > should trouble shooting be necessary. > > > ========================================================== > > > > > > Checking for modem support lines: > > > -------------------------------------- > > > /device/modem symbolic link: > > > slmodemd created symbolic link /dev/ttySL0: > > > Within /etc/udev/ files: > > > > > > Within /etc/modprobe.conf files: > > > /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to > > > blacklist unwanted modem drivers > > > /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem > > > /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem > > > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > > > /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > > > Within any ancient /etc/devfs files: > > > > > > Within ancient kernel 2.4.n /etc/module.conf files: > > > > > > --------- end modem support lines -------- > > > > > > > > >
